osRfc2544DstMac
OS-RFC2544-MIB ·
.1.3.6.1.4.1.6926.2.7.2.1.6
Object
If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544DstMac must be defined
with a host physical address to be used as a remote host for performing an operation.
If osRfc2544Protocol is equal to l3Protocol(5), then the test cannot be enabled if osRfc2544DstMac
is not equal to 00:00:00:00:00:00.
Context
- MIB
- OS-RFC2544-MIB
- OID
.1.3.6.1.4.1.6926.2.7.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osRfc2544CtlEntry
- Table
- osRfc2544CtlTable
- Siblings
- 37
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osRfc2544Owner Owner name. | column | OctetString | .1.3.6.1.4.1.6926.2.7.2.1.1 |
| osRfc2544DstIpType Specifies the type of host address to be used at a remote
host for performing an operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6926.2.7.2.1.10 |
| osRfc2544DstIpAddr If osRfc2544Protocol is equal to l2Protocol(2), then he test cannot be enabled if osRfc2544DstIpAddr
is not equal to 0.0.0.0.
If osRfc2544Protocol is equal to l3Pro… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.7.2.1.11 |
| osRfc2544SrcIpType Specifies the type of host address to be used at a source
host for performing an operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6926.2.7.2.1.12 |
| osRfc2544SrcIpAddr If osRfc2544Protocol is equal to l2Protocol(2), then he test cannot be enabled if osRfc2544SrcIpAddr
is not equal to 0.0.0.0.
If osRfc2544Protocol is equal to l3Pro… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6926.2.7.2.1.13 |
| osRfc2544TxPort If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544TxPort may be defined
and used when osRfc2544DstMac is absent in learning table (FDB) to determine the port,
from wic… | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.7.2.1.14 |
| osRfc2544VlanId If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544VlanId must be defined
with valid and non-zero value before the test start.
If osRfc2544Protocol is eq… | column | - | .1.3.6.1.4.1.6926.2.7.2.1.15 |
| osRfc2544BurstNumber Number of bursts. The value 0 means forever. | column | bursts Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.16 |
| osRfc2544BurstInterval Time interval between bursts, in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.17 |
| osRfc2544Test Test name. | column | OctetString | .1.3.6.1.4.1.6926.2.7.2.1.2 |
| osRfc2544ProbeNumber Number of packets (probes) in a burst. If osRfc2544Duration is not equal to 0,
this object does not make sense and is not used.
Objects osRfc2544ProbeNumber and osRfc2544Duration … | column | messages Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.21 |
| osRfc2544Duration Duration of one burst. The value 0 means, that osRfc2544ProbeNumber will be used.
Objects osRfc2544ProbeNumber and osRfc2544Duration DO NOT NECESSARILY CORRESPOND
TO EACH OTHER o… | column | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.22 |
| osRfc2544ProbeInterval The interval between transmitted frames in a burst.
This object is not used if osRfc2544Rate is not equal to 0.
Objects osRfc2544ProbeInterval and osRfc2544Rate DO NOT NECESSARILY… | column | microseconds Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.24 |
| osRfc2544Rate The rate of transmition frames in bursts. The value 0 means, that osRfc2544ProbeInterval will be used.
Objects osRfc2544ProbeInterval and osRfc2544Rate DO NOT NECESSARILY CORRESPO… | column | Kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.25 |
| osRfc2544ProbeTimeout Specifies the duration to wait for a responce (milliseconds). | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.26 |
| osRfc2544AllwdPcktLoss Maximum loss ratio allowed in the throughput test. | column | 0.01% Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.28 |
| osRfc2544MinStep Minimum rate step in the throughput test. | column | Kbits/sec Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.29 |
| osRfc2544Descr The purpose of this object is to provide a
descriptive name of the remote ping test. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.6926.2.7.2.1.3 |
| osRfc2544PacketLength Packet length, including VLAN ID and CRC.
For throughput(2) and latency(3) returns first value from osRfc2544LengthValue as a reply on GET operation
and rejects SET operation. | column | octets Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.32 |
| osRfc2544DataFill Determine how to fill the data portion of a probe
packet, while number of characters is a multiple of 8. | column | OctetString | .1.3.6.1.4.1.6926.2.7.2.1.35 |
| osRfc2544DSField . | column | DSField | .1.3.6.1.4.1.6926.2.7.2.1.36 |
| osRfc2544Ttl Time To Live. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.37 |
| osRfc2544Priority Priority Code Point (PCP): a 3-bit field which refers to the IEEE 802.1p
priority. It indicates the frame priority level from 0 (lowest) to 7 (highest),
which can be used to prior… | column | Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.38 |
| osRfc2544MdLevel Maintenance Domain Level (MD Level) as described in 802.1ag.
Higher numbers correspond to higher Maintenance Domains.
Only valid If osRfc2544Protocol is equal to l2Protocol(2) | column | Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.39 |
| osRfc2544TestType . | column | TestType | .1.3.6.1.4.1.6926.2.7.2.1.4 |
| osRfc2544Protocol Protocol of a test. | column | TestProtocol | .1.3.6.1.4.1.6926.2.7.2.1.5 |
| osRfc2544MaxRows The maximum number of entries allowed in the
osRfc2544HistTable. An implementation of this
MIB will remove the oldest entry in the
osRfc2544HistTable to allow the addition of an
… | column | rows Unsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.50 |
| osRfc2544TrapsGeneration The value of this object determines when and if
to generate a notification for this entry:
burstComplete(0)- Generate a osRfc2544BurstComplete notification.
burstFail(1) - Gene… | column | Bits | .1.3.6.1.4.1.6926.2.7.2.1.55 |
| osRfc2544TholdFdRiseThold Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this type of threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.60 |
| osRfc2544TholdFdFallThold Frame delay (Average of Round Trip Time) Falling threshold | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.61 |
| osRfc2544TholdJittRiseThold Jitter Rising threshold.
Value 0 means, that this the agent will not check this type of threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.62 |
| osRfc2544TholdJittFallThold Jitter Falling threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.63 |
| osRfc2544TholdPcktLossRiseThold The packet loss Rising threshold. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.64 |
| osRfc2544TholdPcktLossFallThold The packet loss Falling threshold. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.7.2.1.65 |
| osRfc2544SrcMac If osRfc2544Protocol is equal to l2Protocol(2), then osRfc2544SrcMac must be defined.
In case configured, override osRfc2544SrcMacRange parameter value.
If osRfc254… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.7.2.1.7 |
| osRfc2544SrcMacRange Defines customer source-mac range, i.e. multi source-mac addresses based on machine source-mac
changing the thrid byte corresponding to the configured range.
This parameter overw… | column | OS-COMMON-TC-MIBPortList | .1.3.6.1.4.1.6926.2.7.2.1.8 |
| osRfc2544RowStatus This object allows entries to be created, deleted, activated and deactivated.
Deletion of an entry in this table results in all
corresponding tables being deleted. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6926.2.7.2.1.99 |