osProvRfc2544PrflProbeNumber
OS-PROV-RFC2544-MIB ·
.1.3.6.1.4.1.6926.2.11.4.1.21
Object
column
r/w
messages Unsigned32
Number of packets (probes) in a burst. If osProvRfc2544Duration is not equal to 0, this object does not make sense and is not used. Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPOND TO EACH OTHER on GET operation. GET operation always returns the last configured or default value.
Context
- MIB
- OS-PROV-RFC2544-MIB
- OID
.1.3.6.1.4.1.6926.2.11.4.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Units
- messages
- Parent
- osProvRfc2544PrflEntry
- Table
- osProvRfc2544PrflTable
- Siblings
- 25
Syntax
messages Unsigned32
Values & Constraints
Object Constraints
range: 1-1000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osProvRfc2544PrflBurstNumber Number of bursts. The value 0 means forever. | column | bursts Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.16 |
| osProvRfc2544PrflBurstInterval Time interval between bursts, in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.17 |
| osProvRfc2544PrflId . | column | OS-COMMON-TC-MIBEntityName | .1.3.6.1.4.1.6926.2.11.4.1.2 |
| osProvRfc2544PrflDuration Duration of one burst. The value 0 means, that osProvRfc2544ProbeNumber will be used.
Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPOND
TO … | column | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.22 |
| osProvRfc2544PrflProbeInterval The interval between transmitted frames in a burst.
This object is not used if osProvRfc2544Rate is not equal to 0.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT… | column | microseconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.24 |
| osProvRfc2544PrflRate The rate of transmition frames in bursts. The value 0 means, that osProvRfc2544ProbeInterval will be used.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT NECESSAR… | column | Kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.25 |
| osProvRfc2544PrflProbeTimeout Specifies the duration to wait for a responce (milliseconds). | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.26 |
| osProvRfc2544PrflAllwdPcktLoss Maximum loss ratio allowed in the throughput test. | column | 0.01% Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.28 |
| osProvRfc2544PrflMinStep Minimum rate step in the throughput test. | column | Kbits/sec Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.29 |
| osProvRfc2544PrflPacketLength Packet length, including VLAN ID and CRC.
For throughput(2) and latency(3) returns first value from osProvRfc2544LengthValue as a reply on GET operation
and rejects SET operation. | column | octets Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.32 |
| osProvRfc2544PrflDataFill Determine how to fill the data portion of a probe
packet, while number of characters is a multiple of 8. | column | OctetString | .1.3.6.1.4.1.6926.2.11.4.1.35 |
| osProvRfc2544PrflTtl Time To Live. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.37 |
| osProvRfc2544PrflTestType . | column | TestType | .1.3.6.1.4.1.6926.2.11.4.1.4 |
| osProvRfc2544PrflProtocol Protocol of a test. | column | TestProtocol | .1.3.6.1.4.1.6926.2.11.4.1.5 |
| osProvRfc2544PrflMaxRows The maximum number of entries allowed in the
osProvRfc2544HistTable. An implementation of this
MIB will remove the oldest entry in the
osProvRfc2544HistTable to allow the additio… | column | rows Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.50 |
| osProvRfc2544PrflTrapsGeneration The value of this object determines when and if
to generate a notification for this entry:
burstComplete(0)- Generate a osProvRfc2544BurstComplete notification.
burstFail(1) - … | column | Bits | .1.3.6.1.4.1.6926.2.11.4.1.55 |
| osProvRfc2544PrflFdRise Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this type of threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.60 |
| osProvRfc2544PrflFdFall Frame delay (Average of Round Trip Time) Falling threshold | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.61 |
| osProvRfc2544PrflJittRise Jitter Rising threshold.
Value 0 means, that this the agent will not check this type of threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.62 |
| osProvRfc2544PrflJittFall Jitter Falling threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.63 |
| osProvRfc2544PrflPcktLossRise The packet loss Rising threshold. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.64 |
| osProvRfc2544PrflPcktLossFall The packet loss Falling threshold. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.65 |
| osProvRfc2544PrflLastError . | column | OctetString | .1.3.6.1.4.1.6926.2.11.4.1.97 |
| osProvRfc2544PrflAdminStatus Allows to create new rows or delete old rows. | column | OS-COMMON-TC-MIBEntryValidator | .1.3.6.1.4.1.6926.2.11.4.1.98 |
| osProvRfc2544PrflOperStatus . | column | OS-COMMON-TC-MIBProfileStatus | .1.3.6.1.4.1.6926.2.11.4.1.99 |