osProvRfc2544PrflAdminStatus
OS-PROV-RFC2544-MIB ·
.1.3.6.1.4.1.6926.2.11.4.1.98
Object
Allows to create new rows or delete old rows.
Context
- MIB
- OS-PROV-RFC2544-MIB
- OID
.1.3.6.1.4.1.6926.2.11.4.1.98- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osProvRfc2544PrflEntry
- Table
- osProvRfc2544PrflTable
- Siblings
- 25
Syntax
OS-COMMON-TC-MIBEntryValidator
- Source
- OS-COMMON-TC-MIBEntryValidator
- Base type
Enumeration
Values & Constraints
Type Values
1 | unknown |
2 | nothing |
3 | delete |
4 | create |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osProvRfc2544PrflBurstNumber Number of bursts. The value 0 means forever. | column | bursts Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.16 |
| osProvRfc2544PrflBurstInterval Time interval between bursts, in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.17 |
| osProvRfc2544PrflId . | column | OS-COMMON-TC-MIBEntityName | .1.3.6.1.4.1.6926.2.11.4.1.2 |
| osProvRfc2544PrflProbeNumber Number of packets (probes) in a burst. If osProvRfc2544Duration is not equal to 0,
this object does not make sense and is not used.
Objects osProvRfc2544ProbeNumber and osProvRfc2… | column | messages Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.21 |
| osProvRfc2544PrflDuration Duration of one burst. The value 0 means, that osProvRfc2544ProbeNumber will be used.
Objects osProvRfc2544ProbeNumber and osProvRfc2544Duration DO NOT NECESSARILY CORRESPOND
TO … | column | seconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.22 |
| osProvRfc2544PrflProbeInterval The interval between transmitted frames in a burst.
This object is not used if osProvRfc2544Rate is not equal to 0.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT… | column | microseconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.24 |
| osProvRfc2544PrflRate The rate of transmition frames in bursts. The value 0 means, that osProvRfc2544ProbeInterval will be used.
Objects osProvRfc2544ProbeInterval and osProvRfc2544Rate DO NOT NECESSAR… | column | Kbits/sec SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.25 |
| osProvRfc2544PrflProbeTimeout Specifies the duration to wait for a responce (milliseconds). | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.26 |
| osProvRfc2544PrflAllwdPcktLoss Maximum loss ratio allowed in the throughput test. | column | 0.01% Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.28 |
| osProvRfc2544PrflMinStep Minimum rate step in the throughput test. | column | Kbits/sec Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.29 |
| osProvRfc2544PrflPacketLength Packet length, including VLAN ID and CRC.
For throughput(2) and latency(3) returns first value from osProvRfc2544LengthValue as a reply on GET operation
and rejects SET operation. | column | octets Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.32 |
| osProvRfc2544PrflDataFill Determine how to fill the data portion of a probe
packet, while number of characters is a multiple of 8. | column | OctetString | .1.3.6.1.4.1.6926.2.11.4.1.35 |
| osProvRfc2544PrflTtl Time To Live. | column | Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.37 |
| osProvRfc2544PrflTestType . | column | TestType | .1.3.6.1.4.1.6926.2.11.4.1.4 |
| osProvRfc2544PrflProtocol Protocol of a test. | column | TestProtocol | .1.3.6.1.4.1.6926.2.11.4.1.5 |
| osProvRfc2544PrflMaxRows The maximum number of entries allowed in the
osProvRfc2544HistTable. An implementation of this
MIB will remove the oldest entry in the
osProvRfc2544HistTable to allow the additio… | column | rows Unsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.50 |
| osProvRfc2544PrflTrapsGeneration The value of this object determines when and if
to generate a notification for this entry:
burstComplete(0)- Generate a osProvRfc2544BurstComplete notification.
burstFail(1) - … | column | Bits | .1.3.6.1.4.1.6926.2.11.4.1.55 |
| osProvRfc2544PrflFdRise Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this type of threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.60 |
| osProvRfc2544PrflFdFall Frame delay (Average of Round Trip Time) Falling threshold | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.61 |
| osProvRfc2544PrflJittRise Jitter Rising threshold.
Value 0 means, that this the agent will not check this type of threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.62 |
| osProvRfc2544PrflJittFall Jitter Falling threshold. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.63 |
| osProvRfc2544PrflPcktLossRise The packet loss Rising threshold. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.64 |
| osProvRfc2544PrflPcktLossFall The packet loss Falling threshold. | column | 0.01% SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.11.4.1.65 |
| osProvRfc2544PrflLastError . | column | OctetString | .1.3.6.1.4.1.6926.2.11.4.1.97 |
| osProvRfc2544PrflOperStatus . | column | OS-COMMON-TC-MIBProfileStatus | .1.3.6.1.4.1.6926.2.11.4.1.99 |