osEthServFlowRemarkBits
OS-ETH-SERV-MIB ·
.1.3.6.1.4.1.6926.2.10.10.1.24
Object
column
r/w
Bits
The bit reserved(0) is not used.
Context
- MIB
- OS-ETH-SERV-MIB
- OID
.1.3.6.1.4.1.6926.2.10.10.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- osEthServFlowEntry
- Table
- osEthServFlowTable
- Siblings
- 35
Syntax
Bits
Values & Constraints
Enumerated Values
0 | reserved |
1 | markDscp |
2 | markPcp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| osEthServFlowEgBwPrfl Egress bandwidth profile applied to S-Ports to ensure rate limiting.
This object points to the osEthBwTable. | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.10 |
| osEthServFlowEgBwAccStatus Status of egress accounting for the flow | column | OS-COMMON-TC-MIBBwAccountStatus | .1.3.6.1.4.1.6926.2.10.10.1.11 |
| osEthServFlowFloodLimPrfl Profile of Flood limit configuration. Points to osEthFloodPrflTable. | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.12 |
| osEthServFlowPerfPrfl Profile of Performance configuration. Points to osEthPerfTable | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.15 |
| osEthServFlowMepId MEP Id for Profile of Performance tests of the flow. | column | OS-COMMON-TC-MIBOsCfmMepIdOrZero | .1.3.6.1.4.1.6926.2.10.10.1.16 |
| osEthServFlowMepReserve1 For debug and backward compatibility. Must be deleted or replaced in the future. | column | OS-COMMON-TC-MIBPortIndexOrNone | .1.3.6.1.4.1.6926.2.10.10.1.17 |
| osEthServFlowPerfDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
osEthServFlowPerfDestType is 'macAddress'. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.10.10.1.19 |
| osEthServFlowPerfDestMepId The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the c… | column | OS-COMMON-TC-MIBOsCfmMepIdOrZero | .1.3.6.1.4.1.6926.2.10.10.1.20 |
| osEthServFlowPerfDestMepList List of The Maintenance association End Point Identifiers.
This object will be used if the value of the column
osEthServFlowPerfDestType is 'listOfRMeps'. | column | OS-COMMON-TC-MIBMepList | .1.3.6.1.4.1.6926.2.10.10.1.21 |
| osEthServFlowPerfDestType Describes type of destination used.
Flag indicating if the destination is specified by destination MEP ID, by destination
MAC address or by list of destination MEP IDs. | column | Enumeration | .1.3.6.1.4.1.6926.2.10.10.1.22 |
| osEthServFlowPerfEnabled To start/stop Performance test for the flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.10.10.1.23 |
| osEthServFlowMarkDscp . | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.10.10.1.26 |
| osEthServFlowMarkPcp . | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6926.2.10.10.1.27 |
| osEthServFlowRestOfTraffic Define a flow as 'rest of traffic' one.
Only one flow can have this feature. Thus when the value True is set for any flow, agent
automatically reset this object for all other flow… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.10.10.1.30 |
| osEthServFlowLbmPrfl Profile of LBM configuration. Points to osEthLbmTable | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.40 |
| osEthServFlowLbmDestMacAddress The Target MAC Address Field to be transmitted.
This address will be used if the value of the column
osEthServFlowLbmDestType is 'macAddress'. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6926.2.10.10.1.41 |
| osEthServFlowLbmDestMepId The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the c… | column | OS-COMMON-TC-MIBOsCfmMepIdOrZero | .1.3.6.1.4.1.6926.2.10.10.1.42 |
| osEthServFlowLbmDestType Describes type of destination used for LBM. | column | Enumeration | .1.3.6.1.4.1.6926.2.10.10.1.43 |
| osEthServFlowLbmEnabled To start/stop LBM test for the flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.10.10.1.44 |
| osEthServFlowLbmClear This object when written clears the LBM history and result tables and statistics. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.10.10.1.45 |
| osEthServFlowId The value 0 means, that this entry corresponds to the service, not to to any flow. | column | OS-COMMON-TC-MIBServFlowId | .1.3.6.1.4.1.6926.2.10.10.1.5 |
| osEthServFlowUpEgBwPrfl Profile ID to upstream egress bandwith configuration.
It allows to limit traffic, departing from S-Ports. Points to osEthBwTable. | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.55 |
| osEthServFlowUpEgBwAccStatus Status of upstream egress accounting for the flow. It allows to count
traffic, departing from S-Ports. | column | OS-COMMON-TC-MIBBwAccountStatus | .1.3.6.1.4.1.6926.2.10.10.1.56 |
| osEthServFlowDnEgBwPrfl Profile ID to downstream egress bandwith configuration.
It allows to limit traffic, departing from C-Ports. Points to osEthBwTable | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.58 |
| osEthServFlowDnEgBwAccStatus Status of downstream egress accounting for the flow. It allows to count
traffic, departing from C-Ports. | column | OS-COMMON-TC-MIBBwAccountStatus | .1.3.6.1.4.1.6926.2.10.10.1.59 |
| osEthServFlowIngBwPrfl Ingress bandwidth profile applied to C-Ports to ensure rate limiting.
This object points to the osEthBwTable. | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.6 |
| osEthServFlowUpIngFsPrfl Profile ID to upstream ingress flow sampling configuration.
It allows sampling traffic, arriving to C-Ports. Points to osEthFsTable | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.60 |
| osEthServFlowDnIngFsPrfl Profile ID to downstream ingress flow sampling configuration.
It allows sampling traffic, arriving to S-Ports. Points to osEthFsTable | column | OS-COMMON-TC-MIBEntityNameOrNone | .1.3.6.1.4.1.6926.2.10.10.1.61 |
| osEthServFlowUpIngFsSubAgentId Sub agent ID of upstream ingress flow sampling. | column | Integer32 | .1.3.6.1.4.1.6926.2.10.10.1.62 |
| osEthServFlowDnIngFsSubAgentId Sub agent ID of downstream ingress flow sampling. | column | Integer32 | .1.3.6.1.4.1.6926.2.10.10.1.63 |
| osEthServFlowUpstrDEI Upstream drop eligibility indicator sensitivity.
The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will
have Drop precedence 'yellow'.
The value 'dpRed(3)' means,… | column | Enumeration | .1.3.6.1.4.1.6926.2.10.10.1.64 |
| osEthServFlowDownstrDEI Downstream drop eligibility indicator sensitivity.
The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will
have Drop precedence 'yellow'.
The value 'dpRed(3)' mean… | column | Enumeration | .1.3.6.1.4.1.6926.2.10.10.1.65 |
| osEthServFlowIngBwAccStatus Status of ingress accounting for the flow | column | OS-COMMON-TC-MIBBwAccountStatus | .1.3.6.1.4.1.6926.2.10.10.1.7 |
| osEthServFlowHistoryClear This object when written clears the Delay Measurement history tables
- all rows are deleted. When read the value always returns 'false'.
Writing this value does not change the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6926.2.10.10.1.97 |
| osEthServFlowAdminStatus Allows to create new rows or delete old rows. | column | OS-COMMON-TC-MIBEntryValidator | .1.3.6.1.4.1.6926.2.10.10.1.98 |