osEthServFlowPerfDestType

OS-ETH-SERV-MIB · .1.3.6.1.4.1.6926.2.10.10.1.22
MIB view Table view

Object

column r/w Enumeration 
Describes type of destination used.
Flag indicating if the destination is specified by destination MEP ID, by destination
MAC address or by list of destination MEP IDs.

Context

MIB
OS-ETH-SERV-MIB
OID
.1.3.6.1.4.1.6926.2.10.10.1.22
Type
column
Access
readwrite
Status
current
Parent
osEthServFlowEntry
Table
osEthServFlowTable
Siblings
35

Syntax

Enumeration

Values & Constraints

Enumerated Values
1singleRMepId
2macAddress
3listOfRMeps

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
osEthServFlowEgBwPrfl
Egress bandwidth profile applied to S-Ports to ensure rate limiting. This object points to the osEthBwTable.
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.10
osEthServFlowEgBwAccStatus
Status of egress accounting for the flow
columnOS-COMMON-TC-MIBBwAccountStatus.1.3.6.1.4.1.6926.2.10.10.1.11
osEthServFlowFloodLimPrfl
Profile of Flood limit configuration. Points to osEthFloodPrflTable.
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.12
osEthServFlowPerfPrfl
Profile of Performance configuration. Points to osEthPerfTable
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.15
osEthServFlowMepId
MEP Id for Profile of Performance tests of the flow.
columnOS-COMMON-TC-MIBOsCfmMepIdOrZero.1.3.6.1.4.1.6926.2.10.10.1.16
osEthServFlowMepReserve1
For debug and backward compatibility. Must be deleted or replaced in the future.
columnOS-COMMON-TC-MIBPortIndexOrNone.1.3.6.1.4.1.6926.2.10.10.1.17
osEthServFlowPerfDestMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column osEthServFlowPerfDestType is 'macAddress'.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6926.2.10.10.1.19
osEthServFlowPerfDestMepId
The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the c…
columnOS-COMMON-TC-MIBOsCfmMepIdOrZero.1.3.6.1.4.1.6926.2.10.10.1.20
osEthServFlowPerfDestMepList
List of The Maintenance association End Point Identifiers. This object will be used if the value of the column osEthServFlowPerfDestType is 'listOfRMeps'.
columnOS-COMMON-TC-MIBMepList.1.3.6.1.4.1.6926.2.10.10.1.21
osEthServFlowPerfEnabled
To start/stop Performance test for the flow.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.10.1.23
osEthServFlowRemarkBits
The bit reserved(0) is not used.
columnBits.1.3.6.1.4.1.6926.2.10.10.1.24
osEthServFlowMarkDscp
.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6926.2.10.10.1.26
osEthServFlowMarkPcp
.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6926.2.10.10.1.27
osEthServFlowRestOfTraffic
Define a flow as 'rest of traffic' one. Only one flow can have this feature. Thus when the value True is set for any flow, agent automatically reset this object for all other flow…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.10.1.30
osEthServFlowLbmPrfl
Profile of LBM configuration. Points to osEthLbmTable
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.40
osEthServFlowLbmDestMacAddress
The Target MAC Address Field to be transmitted. This address will be used if the value of the column osEthServFlowLbmDestType is 'macAddress'.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6926.2.10.10.1.41
osEthServFlowLbmDestMepId
The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the c…
columnOS-COMMON-TC-MIBOsCfmMepIdOrZero.1.3.6.1.4.1.6926.2.10.10.1.42
osEthServFlowLbmDestType
Describes type of destination used for LBM.
columnEnumeration.1.3.6.1.4.1.6926.2.10.10.1.43
osEthServFlowLbmEnabled
To start/stop LBM test for the flow.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.10.1.44
osEthServFlowLbmClear
This object when written clears the LBM history and result tables and statistics.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.10.1.45
osEthServFlowId
The value 0 means, that this entry corresponds to the service, not to to any flow.
columnOS-COMMON-TC-MIBServFlowId.1.3.6.1.4.1.6926.2.10.10.1.5
osEthServFlowUpEgBwPrfl
Profile ID to upstream egress bandwith configuration. It allows to limit traffic, departing from S-Ports. Points to osEthBwTable.
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.55
osEthServFlowUpEgBwAccStatus
Status of upstream egress accounting for the flow. It allows to count traffic, departing from S-Ports.
columnOS-COMMON-TC-MIBBwAccountStatus.1.3.6.1.4.1.6926.2.10.10.1.56
osEthServFlowDnEgBwPrfl
Profile ID to downstream egress bandwith configuration. It allows to limit traffic, departing from C-Ports. Points to osEthBwTable
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.58
osEthServFlowDnEgBwAccStatus
Status of downstream egress accounting for the flow. It allows to count traffic, departing from C-Ports.
columnOS-COMMON-TC-MIBBwAccountStatus.1.3.6.1.4.1.6926.2.10.10.1.59
osEthServFlowIngBwPrfl
Ingress bandwidth profile applied to C-Ports to ensure rate limiting. This object points to the osEthBwTable.
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.6
osEthServFlowUpIngFsPrfl
Profile ID to upstream ingress flow sampling configuration. It allows sampling traffic, arriving to C-Ports. Points to osEthFsTable
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.60
osEthServFlowDnIngFsPrfl
Profile ID to downstream ingress flow sampling configuration. It allows sampling traffic, arriving to S-Ports. Points to osEthFsTable
columnOS-COMMON-TC-MIBEntityNameOrNone.1.3.6.1.4.1.6926.2.10.10.1.61
osEthServFlowUpIngFsSubAgentId
Sub agent ID of upstream ingress flow sampling.
columnInteger32.1.3.6.1.4.1.6926.2.10.10.1.62
osEthServFlowDnIngFsSubAgentId
Sub agent ID of downstream ingress flow sampling.
columnInteger32.1.3.6.1.4.1.6926.2.10.10.1.63
osEthServFlowUpstrDEI
Upstream drop eligibility indicator sensitivity. The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will have Drop precedence 'yellow'. The value 'dpRed(3)' means,…
columnEnumeration.1.3.6.1.4.1.6926.2.10.10.1.64
osEthServFlowDownstrDEI
Downstream drop eligibility indicator sensitivity. The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will have Drop precedence 'yellow'. The value 'dpRed(3)' mean…
columnEnumeration.1.3.6.1.4.1.6926.2.10.10.1.65
osEthServFlowIngBwAccStatus
Status of ingress accounting for the flow
columnOS-COMMON-TC-MIBBwAccountStatus.1.3.6.1.4.1.6926.2.10.10.1.7
osEthServFlowHistoryClear
This object when written clears the Delay Measurement history tables - all rows are deleted. When read the value always returns 'false'. Writing this value does not change the …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6926.2.10.10.1.97
osEthServFlowAdminStatus
Allows to create new rows or delete old rows.
columnOS-COMMON-TC-MIBEntryValidator.1.3.6.1.4.1.6926.2.10.10.1.98