oriWirelessIfMulticastRate

This object is used to configure the multicast rate, but it is 
dependent on the type of wireless NIC.  The value of this object is
given in 500 Kbps units.  This object can be configured to one of the
values defined by the supported multicast rates objects
(oriWirelessIfSupportedMulticastRates).
              
For 802.11b Wireless NICs:
              
This object identifies multicast rate of the wireless interface. 
This is dependent on the distance between APs.  When the distance
between APs object is set to small, minicell, or microcell the 
multicast rates can be set to 11 Mbit/s (22 in 500 Kbps units), 
5.5 Mbit/s (11), 2 Mbit/s (4), and 1 Mbit/s (2).  When this object 
is set to medium, the allowed rates are 5.5 Mbit/s (11), 
2 Mbit/s (4), 1 Mbit/s (2).  When this object is set to large, then 
the multicast rates can be set to 2 Mbits/s (4) or 1 Mbits/s (2).  
The default value for this object should be 2 Mbits/sec (4).
              
For 802.11a, g, and a/g Wireless NICs:
              
This object is used to set the multicast rate for beacons, frames
used for protection mechanism (CTS), and other multicast and broadcast
frames.

MIB

ORiNOCO-MIB

OID

.1.3.6.1.4.1.11898.2.1.2.1.1.1.8

Type

column

Access

readwrite

Status

current

Parent

oriWirelessIfPropertiesEntry

Table

oriWirelessIfPropertiesTable

Siblings

39