dcRectifierGroupStartupVoltage

ORION-BASE-MIB · .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.9
MIB view Table view

Object

column r/w 10 mV SNMPv2-SMIInteger32 
Startup parameters are the values that rectifiers use 
during the start-up phase. These parameters allow starting 
the system smoothly after a mains failure even on a 
discharged battery and even without ORION.

Context

MIB
ORION-BASE-MIB
OID
.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.9
Type
column
Access
readwrite
Status
current
Units
10 mV
Parent
dcRectifierGroupEntry
Table
dcRectifierGroupTable
Siblings
14

Syntax

10 mV SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dcRectifierGroupIndex
Table index.
columnInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.1
dcRectifierGroupStartupCurrentLimit
For details see dcRectifierGroupStartupVoltage.
column100 mA SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.10
dcRectifierGroupStartupPowerLimit
For details see dcRectifierGroupStartupVoltage.
column1 W SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.11
dcRectifierGroupStartupLimitTime
For details see dcRectifierGroupStartupVoltage.
column10 ms SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.12
dcRectifierGroupPowerupDelay
This parameter is used after a mains failure to delay the start-up of all rectifiers.
column10 ms SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.13
dcRectifierGroupPowerupTime
This parameter used after a mains failure and allows defining a time within all rectifiers needs to start-up one after another.
column10 ms SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.14
dcRectifierGroupUmaxOff
Overvoltage protection value.
column10 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.15
dcRectifierGroupName
Rectifier group name to identify an individual device parameter set.
columnOctetString.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.2
dcRectifierGroupRectifierType
Rectifier type defined for this group.
columnEnumeration.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.3
dcRectifierGroupDefaultVoltage
This default voltage is used by rectifiers when there is no connection to ORION.
column10 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.4
dcRectifierGroupDefaultCurrentLimit
This default current limit is used by rectifiers when there is no connection to ORION.
column100 mA SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.5
dcRectifierGroupDefaultPowerLimit
This default power limit is used by rectifiers when there is no connection to ORION.
column1 W SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.6
dcRectifierGroupInputLowOff
Threshold for low AC input voltage. It can is used to adjust the behaviour of the power system to the available AC network limitation.
column100 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.7
dcRectifierGroupInputLowOn
For details see dcRectifierGroupInputLowOff.
column100 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.8