dcRectifierGroupRectifierType
ORION-BASE-MIB ·
.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.3
Object
column
Enumeration
Rectifier type defined for this group.
Context
- MIB
- ORION-BASE-MIB
- OID
.1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dcRectifierGroupEntry
- Table
- dcRectifierGroupTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown48V |
2 | fR48V2000W |
3 | dPR1200B48 |
4 | dPR1500B48 |
5 | dPR600B48 |
6 | dPR7200B48 |
7 | fR48to60V2000W |
8 | unknown24V |
9 | unknown60V |
10 | dPR600B60 |
11 | dPR3500B48 |
12 | dPR3500B24 |
13 | dPR300B48 |
14 | dPR1600B48 |
15 | dPR2700B48 |
16 | dPR2400B48 |
17 | dPR4000B48 |
18 | dPR2900B48 |
19 | dPR4000B48to60 |
20 | dPR850B48 |
21 | dPR2000B48 |
22 | dPR6000B48A1 |
23 | dPR6000B48B1 |
24 | dPR4815B |
25 | dPR24100B |
26 | dPR3000 |
27 | eSR4856FF |
28 | dPR2900F48A1 |
29 | dPR4000B48A5 |
30 | dPR6000B48A1forChineseMarket |
31 | dPR2500F48A1 |
32 | dPR3000B48 |
33 | dPR1000B48 |
34 | dPR12000240 |
35 | dPR12000336 |
36 | dPR3000B48A4 |
37 | dPR1800B48A1 |
38 | dPR1800B48A2 |
39 | dPR6000B48A2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcRectifierGroupIndex Table index. | column | Integer32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.1 |
| dcRectifierGroupStartupCurrentLimit For details see dcRectifierGroupStartupVoltage. | column | 100 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.10 |
| dcRectifierGroupStartupPowerLimit For details see dcRectifierGroupStartupVoltage. | column | 1 W SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.11 |
| dcRectifierGroupStartupLimitTime For details see dcRectifierGroupStartupVoltage. | column | 10 ms SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.12 |
| dcRectifierGroupPowerupDelay This parameter is used after a mains failure to
delay the start-up of all rectifiers. | column | 10 ms SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.13 |
| dcRectifierGroupPowerupTime This parameter used after a mains failure and allows
defining a time within all rectifiers needs to start-up
one after another. | column | 10 ms SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.14 |
| dcRectifierGroupUmaxOff Overvoltage protection value. | column | 10 mV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.15 |
| dcRectifierGroupName Rectifier group name to identify an individual device
parameter set. | column | OctetString | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.2 |
| dcRectifierGroupDefaultVoltage This default voltage is used by rectifiers when there
is no connection to ORION. | column | 10 mV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.4 |
| dcRectifierGroupDefaultCurrentLimit This default current limit is used by rectifiers when there
is no connection to ORION. | column | 100 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.5 |
| dcRectifierGroupDefaultPowerLimit This default power limit is used by rectifiers when there
is no connection to ORION. | column | 1 W SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.6 |
| dcRectifierGroupInputLowOff Threshold for low AC input voltage. It can is used to
adjust the behaviour of the power system to the available
AC network limitation. | column | 100 mV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.7 |
| dcRectifierGroupInputLowOn For details see dcRectifierGroupInputLowOff. | column | 100 mV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.8 |
| dcRectifierGroupStartupVoltage Startup parameters are the values that rectifiers use
during the start-up phase. These parameters allow starting
the system smoothly after a mains failure even on a
discharged … | column | 10 mV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.4.5.1.9 |