dcBatteryTestVoltageWithinUfloat

ORION-BASE-MIB · .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.6
MIB view Table view

Object

scalar obsolete 10 mV SNMPv2-SMIInteger32 
Battery voltage must be within Ufloat +/- set voltage for a 
given time (see also dcBatteryTestVoltageWithinUfloatPeriod)
in order to start a battery test.

Context

MIB
ORION-BASE-MIB
OID
.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.6
Type
scalar
Access
readonly
Status
obsolete
Units
10 mV
Parent
dcBatteryTestParameter
Siblings
11

Syntax

10 mV SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dcBatteryTestUsupport obsolete
Support charge voltage for the battery.
scalar10 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.1
dcBatteryTestIntervalEnabled obsolete
Enable/disable interval. For more details see dcBatteryTestInterval.
scalarEnumeration.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.10
dcBatteryTestStartTimeFrom obsolete
Defines start time window for battery test. The possible time window is defined as the range between dcBatteryTestStartTimeFrom and dcBatteryTestStartTimeTo. The value is in the…
scalarOctetString.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.11
dcBatteryTestStartTimeTo obsolete
For details see dcBatteryTestStartTimeFrom.
scalarOctetString.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.12
dcBatteryTestDuration obsolete
Battery test duration.
scalarminute SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.2
dcBatteryTestInterval obsolete
Minimal time between programmed battery tests as start condition.
scalardays SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.3
dcBatteryTestDischargeCurrent obsolete
Battery discharge current. The maximum value 2147483647 is used to indicate an invalid value.
scalar100 mA SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.4
dcBatteryTestMinDuration obsolete
Minimum battery test duration during which time a battery test is not stopped in case of a voltage below the support voltage or a current difference higher than the specified va…
scalarminutes SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.5
dcBatteryTestVoltageWithinUfloatPeriod obsolete
For details see dcBatteryTestVoltageWithinUfloat parameter.
scalardays SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.7
dcBatteryTestTempFrom obsolete
Battery temperature must be within temperature range given by dcBatteryTestTempFrom and dcBatteryTestTempTo, so that a battery test can be started.
scalar0.1 degree SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.8
dcBatteryTestTempTo obsolete
For details see dcBatteryTestTempFrom parameter.
scalar0.1 degree SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.9