dcBatteryTestTableVoltageWithinUfloat
ORION-BASE-MIB ·
.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.11
Object
Battery voltage must be within Ufloat +/- set voltage for a given time (see also dcBatteryTestTableVoltageWithinUfloatPeriod) in order to start a battery test.
Context
- MIB
- ORION-BASE-MIB
- OID
.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 10 mV
- Parent
- dcBatteryTestTableEntry
- Table
- dcBatteryTestTable
- Siblings
- 18
Syntax
10 mV SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcBatteryTestTableIndex Table index. | column | Integer32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.1 |
| dcBatteryTestTableMinDuration Minimum battery test duration during which time a battery test
is not stopped in case of a voltage below the support voltage or
a current difference higher than the specified va… | column | minutes SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.10 |
| dcBatteryTestTableVoltageWithinUfloatPeriod For details see dcBatteryTestTableVoltageWithinUfloat parameter. | column | days SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.12 |
| dcBatteryTestTableTempFrom Battery temperature must be within temperature range given by dcBatteryTestTableTempFrom and dcBatteryTestTableTempTo, so that a battery test can be started. | column | 0.1 degree SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.13 |
| dcBatteryTestTableTempTo For details see dcBatteryTestTableTempFrom parameter. | column | 0.1 degree SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.14 |
| dcBatteryTestTableIntervalEnabled Enable/disable interval. For more details see dcBatteryTestTableInterval. | column | Enumeration | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.15 |
| dcBatteryTestTableStartTimeFrom Defines start time window for battery test. The possible time window is defined as the range between dcBatteryTestTableStartTimeFrom and dcBatteryTestTableStartTimeTo. The value i… | column | OctetString | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.16 |
| dcBatteryTestTableStartTimeTo For details see dcBatteryTestTableStartTimeFrom. | column | OctetString | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.17 |
| dcBatteryTestTableControl Manual Start/stop of battery test. | column | Enumeration | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.18 |
| dcBatteryTestTableFailureEvent Reset the battery test failure event. | column | Enumeration | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.19 |
| dcBatteryTestTablePriority Priority of the battery test. Used as index for this table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.2 |
| dcBatteryTestTableName Battery test name. | column | OctetString | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.3 |
| dcBatteryTestTableType Battery test type used. | column | Enumeration | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.4 |
| dcBatteryTestTableStatus Current status of battery test. | column | Enumeration | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.5 |
| dcBatteryTestTableUsupport Support charge voltage for the battery. | column | 10 mV SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.6 |
| dcBatteryTestTableDuration Battery test duration. Zero indicates that this value is not set. | column | minute SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.7 |
| dcBatteryTestTableInterval Minimal time between programmed battery tests as start
condition. | column | days SNMPv2-SMIGauge32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.8 |
| dcBatteryTestTableDischargeCurrent Battery discharge current. The maximum value 2147483647
is used to indicate an invalid value. | column | 100 mA SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.9 |