dcBatteryTestTableMinDuration

ORION-BASE-MIB · .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.10

MIB view Table view

Object

column r/w minutes SNMPv2-SMIGauge32

Minimum battery test duration during which time a battery test 
is not stopped in case of a voltage below the support voltage or 
a current difference higher than the specified value defined in 
Idiff measurement is detected.

Context

MIB: ORION-BASE-MIB
OID: .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.10
Type: column
Access: readwrite
Status: current
Units: minutes
Parent: dcBatteryTestTableEntry
Table: dcBatteryTestTable
Siblings: 18

Syntax

minutes SNMPv2-SMIGauge32

Source: SNMPv2-SMIGauge32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dcBatteryTestTableIndex Table index.	column	Integer32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.1`
dcBatteryTestTableVoltageWithinUfloat Battery voltage must be within Ufloat +/- set voltage for a given time (see also dcBatteryTestTableVoltageWithinUfloatPeriod) in order to start a battery test.	column	10 mV SNMPv2-SMIInteger32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.11`
dcBatteryTestTableVoltageWithinUfloatPeriod For details see dcBatteryTestTableVoltageWithinUfloat parameter.	column	days SNMPv2-SMIGauge32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.12`
dcBatteryTestTableTempFrom Battery temperature must be within temperature range given by dcBatteryTestTableTempFrom and dcBatteryTestTableTempTo, so that a battery test can be started.	column	0.1 degree SNMPv2-SMIInteger32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.13`
dcBatteryTestTableTempTo For details see dcBatteryTestTableTempFrom parameter.	column	0.1 degree SNMPv2-SMIInteger32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.14`
dcBatteryTestTableIntervalEnabled Enable/disable interval. For more details see dcBatteryTestTableInterval.	column	Enumeration	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.15`
dcBatteryTestTableStartTimeFrom Defines start time window for battery test. The possible time window is defined as the range between dcBatteryTestTableStartTimeFrom and dcBatteryTestTableStartTimeTo. The value i…	column	OctetString	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.16`
dcBatteryTestTableStartTimeTo For details see dcBatteryTestTableStartTimeFrom.	column	OctetString	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.17`
dcBatteryTestTableControl Manual Start/stop of battery test.	column	Enumeration	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.18`
dcBatteryTestTableFailureEvent Reset the battery test failure event.	column	Enumeration	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.19`
dcBatteryTestTablePriority Priority of the battery test. Used as index for this table.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.2`
dcBatteryTestTableName Battery test name.	column	OctetString	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.3`
dcBatteryTestTableType Battery test type used.	column	Enumeration	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.4`
dcBatteryTestTableStatus Current status of battery test.	column	Enumeration	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.5`
dcBatteryTestTableUsupport Support charge voltage for the battery.	column	10 mV SNMPv2-SMIInteger32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.6`
dcBatteryTestTableDuration Battery test duration. Zero indicates that this value is not set.	column	minute SNMPv2-SMIGauge32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.7`
dcBatteryTestTableInterval Minimal time between programmed battery tests as start condition.	column	days SNMPv2-SMIGauge32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.8`
dcBatteryTestTableDischargeCurrent Battery discharge current. The maximum value 2147483647 is used to indicate an invalid value.	column	100 mA SNMPv2-SMIInteger32	`.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.7.1.9`