dcBatteryTestMinDuration

ORION-BASE-MIB · .1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.5
MIB view Table view

Object

scalar obsolete minutes SNMPv2-SMIGauge32 
Minimum battery test duration during which time a battery test 
is not stopped in case of a voltage below the support voltage or 
a current difference higher than the specified value defined in 
Idiff measurement is detected.

Context

MIB
ORION-BASE-MIB
OID
.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.5
Type
scalar
Access
readonly
Status
obsolete
Units
minutes
Parent
dcBatteryTestParameter
Siblings
11

Syntax

minutes SNMPv2-SMIGauge32
Source
SNMPv2-SMIGauge32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dcBatteryTestUsupport obsolete
Support charge voltage for the battery.
scalar10 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.1
dcBatteryTestIntervalEnabled obsolete
Enable/disable interval. For more details see dcBatteryTestInterval.
scalarEnumeration.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.10
dcBatteryTestStartTimeFrom obsolete
Defines start time window for battery test. The possible time window is defined as the range between dcBatteryTestStartTimeFrom and dcBatteryTestStartTimeTo. The value is in the…
scalarOctetString.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.11
dcBatteryTestStartTimeTo obsolete
For details see dcBatteryTestStartTimeFrom.
scalarOctetString.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.12
dcBatteryTestDuration obsolete
Battery test duration.
scalarminute SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.2
dcBatteryTestInterval obsolete
Minimal time between programmed battery tests as start condition.
scalardays SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.3
dcBatteryTestDischargeCurrent obsolete
Battery discharge current. The maximum value 2147483647 is used to indicate an invalid value.
scalar100 mA SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.4
dcBatteryTestVoltageWithinUfloat obsolete
Battery voltage must be within Ufloat +/- set voltage for a given time (see also dcBatteryTestVoltageWithinUfloatPeriod) in order to start a battery test.
scalar10 mV SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.6
dcBatteryTestVoltageWithinUfloatPeriod obsolete
For details see dcBatteryTestVoltageWithinUfloat parameter.
scalardays SNMPv2-SMIGauge32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.7
dcBatteryTestTempFrom obsolete
Battery temperature must be within temperature range given by dcBatteryTestTempFrom and dcBatteryTestTempTo, so that a battery test can be started.
scalar0.1 degree SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.8
dcBatteryTestTempTo obsolete
For details see dcBatteryTestTempFrom parameter.
scalar0.1 degree SNMPv2-SMIInteger32.1.3.6.1.4.1.20246.2.3.1.1.1.2.5.2.1.9