optixPktPtpClockNotSlave

OPTIX-PKT-PTPCLOCK-MIB · .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.45
MIB view Table view

Object

column r/w Enumeration 
This parameter describes the NotSlave status of a PTP clock. 0: disable, 1: enable.

Context

MIB
OPTIX-PKT-PTPCLOCK-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.45
Type
column
Access
readwrite
Status
current
Parent
optixPktPtpClockEntry
Table
optixPktPtpClockTable
Siblings
45

Syntax

Enumeration

Values & Constraints

Enumerated Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixPktPtpClockPhyPortId
this parameter describes the physical ports ID of 1588 mode
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.1
optixPktPtpClockPrewiredPortState
this parameter describes the preselection status of PTP clock. 0 masterSlave, 1 master, 2 slave
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.10
optixPktPtpClockPEMode
this parameter describes the P/E mode of PTP clock. 1 p2p, 2 e2e
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.11
optixPktPtpClockHighBit
this parameter describes the high bit of received source PTP clock. Value range 1 to 0xfffffff. The defaut value is all Fs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.12
optixPktPtpClockLowBit
this parameter describes the low bit of received source PTP clock
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.13
optixPktPtpClockInterfaceNo
this parameter describes the interface NO of the PTP port that receive source clock. Value range 1 to 0xfffffff. The defaut value is all Fs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.14
optixPktPtpClockLinkState
this parameter describes the link state of the PTP port that receive source clock. 1 up, 0 down
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.15
optixPktPtpClockMsgFormat
this parameter describes the encapsulated format of PTP packeting. 1 ptpeth, 2 ptpip
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.16
optixPktPtpClockRefClkIDHigh
this parameter describes the high bit of higher priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.17
optixPktPtpClockRefClkIDLow
this parameter describes the high bit of lower priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.18
optixPktPtpClockRecClkNo
this parameter describes the interface NO of port that reveive clock. Value range 1 to 0xffff. The default value is all Fs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.19
optixPktPtpClockPortManState
this parameter describes the state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 5 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 255 snmp
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.2
optixPktPtpClockExtInterfaceMode
this parameter describes the PTP ports mode of external interface. 1 extClock, 2 extTime
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.20
optixPktPtpClockINorOUT
this parameter describes the direction(IN or OUT) of PTP clock port. 1 in, 2 out
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.21
optixPktPtpClockTimeProtocolType
this parameter describes the protocol style of PTP clock. 1 dcls, 2 oneppsTime, 3 j211
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.22
optixPktPtpClockElectricalLevel
this parameter describes the electrical level of PTP clock. 3 rs422, 255 snmpnull
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.23
optixPktPtpClockQulityOfTime
This parameter describes the time quality degree of a PTP clock.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.24
optixPktPtpClockPrecision
This parameter describes the time precision accuracy of a PTP clock.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.25
optixPktPtpClockSrcType
This parameter describes the type of the source PTP clock. 1 ATOMICCLOCK, 2 GPS, 3 TerrestrialRadio, 4 PTP, 5 NTP, 6 HANDSET, 7 OTHER, 8 Internaloscillator
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.26
optixPktPtpClockPriority1
This parameter describes priority 1 of a PTP port. Value range: 0 to 255.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.27
optixPktPtpClockPriority2
This parameter describes priority 2 of a PTP port. Value range: 0 to 255.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.28
optixPktPtpClockRealState
this parameter describes the real state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 4 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 255 snmp
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.29
optixPktPtpClockPortState
this parameter describes the enabled state of PTP clock port. 0 disable, 1 enable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.3
optixPktPtpClockWarpMode
This parameter describes the divergence mode of a PTP port. 0: length; 1: time. The default value is length.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.30
optixPktPtpClockWarpDirection
This parameter describes the divergence direction of a PTP port. 0: positive; 1: negative. The default value is positive.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.31
optixPktPtpClockWarpValue
This parameter describes the divergence value of a PTP port. Value range for the length mode: 0 to 54000 (unit m).The default value is 0. Value range for the time mode 0 to 262143…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.32
optixPktPtpClockStep
this parameter describes the ports PTP STEP mode. 1 ONESTEP, 2 TWOSTEP. The default value is ONESTEP. Note The FO supports only ONESTEP. That is, the GSP supports both modes. TWOS…
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.33
optixPktPtpClockPortMode
this parameter describes the ports 1588 mode. 1 oc, 2 bc, 3 tc, 5 tcBc
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.34
optixPktPtpClockAcrState
this parameter describes the ports enable status of 1588 ACR. 0 disable, 1 enable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.35
optixPktPtpClockTimeLevelMode
this parameter describes the time level of external time interface. 1 manual, 2 auto
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.36
optixPktPtpCableLengthDirRec
this parameter describes the received direction(IN or OUT) of external cable. 0 receive, 1 send
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.37
optixPktPtpCableLengthModeRec
this parameter describes the received direction(IN or OUT) of external cable in in transmission length mode. 0 length, 1 time
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.38
optixPktPtpCableLengthValueRec
this parameter describes the received direction(IN or OUT) of external cable in length value
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.39
optixPktPtpClockAnnounceCycle
this parameter describes the announce packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.4
optixPktPtpCableLengthDirSend
this parameter describes the sent direction(IN or OUT) of external cable. 0 receive, 1 send
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.40
optixPktPtpCableLengthModeSend
this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode. 0 length, 1 time
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.41
optixPktPtpCableLengthValueSend
this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.42
optixPktPtpPortVlanPri
this parameter describes Vlan Priority with the PTP message.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.43
optixPktPtpClockLocalPriority
This parameter describes the local priority of a PTP clock.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.44
optixPktPtpClockPortDmac
This parameter describes the destination MAC address of a PTP clock. mac011B19000000:01-1B-19-00-00-00,mac0180C200000E:01-80-C2-00-00-0E.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.46
optixPktPtpClockSyncCycle
this parameter describes the SYNC packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8/…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.5
optixPktPtpClockDelayCycle
this parameter describes the DELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.6
optixPktPtpClockPdelayCycle
this parameter describes the PDELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.7
optixPktPtpClockAnnounceTimeout
This parameter describes the timeout interval of port announce diagram.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.8
optixPktPtpClockVlan
this parameter describes the VLAN value of PTP packet
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.9