optixPktPtpClockElectricalLevel
OPTIX-PKT-PTPCLOCK-MIB ·
.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.23
Object
column
r/w
Enumeration
this parameter describes the electrical level of PTP clock. 3 rs422, 255 snmpnull
Context
- MIB
- OPTIX-PKT-PTPCLOCK-MIB
- OID
.1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optixPktPtpClockEntry
- Table
- optixPktPtpClockTable
- Siblings
- 45
Syntax
Enumeration
Values & Constraints
Enumerated Values
3 | rs422 |
255 | snmpnull |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optixPktPtpClockPhyPortId this parameter describes the physical ports ID of 1588 mode | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.1 |
| optixPktPtpClockPrewiredPortState this parameter describes the preselection status of PTP clock. 0 masterSlave, 1 master, 2 slave | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.10 |
| optixPktPtpClockPEMode this parameter describes the P/E mode of PTP clock. 1 p2p, 2 e2e | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.11 |
| optixPktPtpClockHighBit this parameter describes the high bit of received source PTP clock. Value range 1 to 0xfffffff. The defaut value is all Fs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.12 |
| optixPktPtpClockLowBit this parameter describes the low bit of received source PTP clock | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.13 |
| optixPktPtpClockInterfaceNo this parameter describes the interface NO of the PTP port that receive source clock. Value range 1 to 0xfffffff. The defaut value is all Fs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.14 |
| optixPktPtpClockLinkState this parameter describes the link state of the PTP port that receive source clock. 1 up, 0 down | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.15 |
| optixPktPtpClockMsgFormat this parameter describes the encapsulated format of PTP packeting. 1 ptpeth, 2 ptpip | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.16 |
| optixPktPtpClockRefClkIDHigh this parameter describes the high bit of higher priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.17 |
| optixPktPtpClockRefClkIDLow this parameter describes the high bit of lower priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.18 |
| optixPktPtpClockRecClkNo this parameter describes the interface NO of port that reveive clock. Value range 1 to 0xffff. The default value is all Fs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.19 |
| optixPktPtpClockPortManState this parameter describes the state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 5 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 255 snmp | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.2 |
| optixPktPtpClockExtInterfaceMode this parameter describes the PTP ports mode of external interface. 1 extClock, 2 extTime | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.20 |
| optixPktPtpClockINorOUT this parameter describes the direction(IN or OUT) of PTP clock port. 1 in, 2 out | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.21 |
| optixPktPtpClockTimeProtocolType this parameter describes the protocol style of PTP clock. 1 dcls, 2 oneppsTime, 3 j211 | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.22 |
| optixPktPtpClockQulityOfTime This parameter describes the time quality degree of a PTP clock. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.24 |
| optixPktPtpClockPrecision This parameter describes the time precision accuracy of a PTP clock. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.25 |
| optixPktPtpClockSrcType This parameter describes the type of the source PTP clock. 1 ATOMICCLOCK, 2 GPS, 3 TerrestrialRadio, 4 PTP, 5 NTP, 6 HANDSET, 7 OTHER, 8 Internaloscillator | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.26 |
| optixPktPtpClockPriority1 This parameter describes priority 1 of a PTP port. Value range: 0 to 255. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.27 |
| optixPktPtpClockPriority2 This parameter describes priority 2 of a PTP port. Value range: 0 to 255. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.28 |
| optixPktPtpClockRealState this parameter describes the real state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 4 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 255 snmp | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.29 |
| optixPktPtpClockPortState this parameter describes the enabled state of PTP clock port. 0 disable, 1 enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.3 |
| optixPktPtpClockWarpMode This parameter describes the divergence mode of a PTP port. 0: length; 1: time. The default value is length. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.30 |
| optixPktPtpClockWarpDirection This parameter describes the divergence direction of a PTP port. 0: positive; 1: negative. The default value is positive. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.31 |
| optixPktPtpClockWarpValue This parameter describes the divergence value of a PTP port. Value range for the length mode: 0 to 54000 (unit m).The default value is 0. Value range for the time mode 0 to 262143… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.32 |
| optixPktPtpClockStep this parameter describes the ports PTP STEP mode. 1 ONESTEP, 2 TWOSTEP. The default value is ONESTEP. Note The FO supports only ONESTEP. That is, the GSP supports both modes. TWOS… | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.33 |
| optixPktPtpClockPortMode this parameter describes the ports 1588 mode. 1 oc, 2 bc, 3 tc, 5 tcBc | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.34 |
| optixPktPtpClockAcrState this parameter describes the ports enable status of 1588 ACR. 0 disable, 1 enable | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.35 |
| optixPktPtpClockTimeLevelMode this parameter describes the time level of external time interface. 1 manual, 2 auto | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.36 |
| optixPktPtpCableLengthDirRec this parameter describes the received direction(IN or OUT) of external cable. 0 receive, 1 send | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.37 |
| optixPktPtpCableLengthModeRec this parameter describes the received direction(IN or OUT) of external cable in in transmission length mode. 0 length, 1 time | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.38 |
| optixPktPtpCableLengthValueRec this parameter describes the received direction(IN or OUT) of external cable in length value | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.39 |
| optixPktPtpClockAnnounceCycle this parameter describes the announce packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.4 |
| optixPktPtpCableLengthDirSend this parameter describes the sent direction(IN or OUT) of external cable. 0 receive, 1 send | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.40 |
| optixPktPtpCableLengthModeSend this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode. 0 length, 1 time | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.41 |
| optixPktPtpCableLengthValueSend this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.42 |
| optixPktPtpPortVlanPri this parameter describes Vlan Priority with the PTP message. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.43 |
| optixPktPtpClockLocalPriority This parameter describes the local priority of a PTP clock. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.44 |
| optixPktPtpClockNotSlave This parameter describes the NotSlave status of a PTP clock. 0: disable, 1: enable. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.45 |
| optixPktPtpClockPortDmac This parameter describes the destination MAC address of a PTP clock. mac011B19000000:01-1B-19-00-00-00,mac0180C200000E:01-80-C2-00-00-0E. | column | Enumeration | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.46 |
| optixPktPtpClockSyncCycle this parameter describes the SYNC packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8/… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.5 |
| optixPktPtpClockDelayCycle this parameter describes the DELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.6 |
| optixPktPtpClockPdelayCycle this parameter describes the PDELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.7 |
| optixPktPtpClockAnnounceTimeout This parameter describes the timeout interval of port announce diagram. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.8 |
| optixPktPtpClockVlan this parameter describes the VLAN value of PTP packet | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.9 |