optixTunnelTpOamMepRevTnliIndex

OPTIX-MPLSTP-OAM-MIB · .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.21
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This object indicates the reverse tunnel index. This parameter is applicable only when the tunnel serves as an egress node. When the value is 0xffffffff, the reverse tunnel index is not comnfigured.

Context

MIB
OPTIX-MPLSTP-OAM-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.21
Type
column
Access
readwrite
Status
current
Parent
optixTunnelTpOamMepEntry
Table
optixTunnelTpOamMepTable
Siblings
36

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixTunnelTpOamMepIndex
This object indicates the tunnel OAM MEP index, ranging from 1 to 0x00ffffff.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.1
optixTunnelTpOamMepCcSend
This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional ingress node. The queried val…
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.10
optixTunnelTpOamMepSf
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.11
optixTunnelTpOamMepSd
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.12
optixTunnelTpOamMepMegInfo
This object indicates the MEG ID, which is a character string.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.13
optixTunnelTpOamMepLckEnable
This object indicates the locking status. 1: enable 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.14
optixTunnelTpOamMepLckTime
This object indicates theLCK packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6:60000 ms (1 minute) 7: 600000 ms(10min)
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.15
optixTunnelTpOamMepLckPri
This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates thatthe priority is synchronized with the CC packet priority.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.16
optixTunnelTpOamMepAisEnable
This object indicates whether the AIS is enabled. 1: enable 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.17
optixTunnelTpOamMepAisTime
This object indicates the AIS packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes)
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.18
optixTunnelTpOamMepAisPri
This object indicates the AIS packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.19
optixTunnelTpOamMepEnable
This object indicates whether the OAM is enabled. 1: enable 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.2
optixTunnelTpOamMepLmMode
This object indicates the LM packet mode. 0: standard 1: Huawei
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.20
optixTunnelTpOamMepStandard
This object indicates the OAM protocol standard. 1: 1711,2: 1731
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.22
optixTunnelTpOamMepGalMode
This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label)
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.23
optixTunnelTpOamMepTSTState
This parameter indicates the sending status of TST packets. 0:stop 1:testing.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.24
optixTunnelTpOamMepRCVPKTNum
This parameter indicates the total number of received TST packets.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.25
optixTunnelTpOamMepSendPKTNum
This parameter indicates the total number of sent TST packets.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.26
optixTunnelTpOamMepMISCRCNum
This parameter indicates the number of received CRC error TST packets.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.27
optixTunnelTpOamMepMISCodeNum
This parameter indicates the number of received TST packets with error codes.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.28
optixTunnelTpOamMepMISOrderNum
This parameter indicates the number of received TST packets with error orders.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.29
optixTunnelTpOamMepLevel
This object indicates the MEG level. Default: 7. Valid values range from 0 to 7.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.3
optixTunnelTpOamMepClrTSTDir
This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&receive 1: receive 2: send
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.30
optixTunnelTpOamMepPKTLength
This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates that setting the length is invalid.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.31
optixTunnelTpOamMepTimeSpace
This parameter indicates the TST testing interval.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.32
optixTunnelTpOamMepPrio
This parameter indicates the priority of TST testing.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.33
optixTunnelTpOamMepTranskind
This parameter indicates the type of the transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.34
optixTunnelTpOamMepIsOffOper
This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.35
optixTunnelTpOamMepTSTRecvEn
This parameter indicates the receive enable status of TST packets.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.36
optixTunnelTpOamMepprotocolformat
This object indicates the format of the protocol,1:standard,2:huawei
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.37
optixTunnelTpOamMepMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.4
optixTunnelTpOamMepId
This object indicates the MEP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.5
optixTunnelTpOamMepPeerId
This object indicates the remote MEP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.6
optixTunnelTpOamMepCheckWay
This object indicates the OAM detection mode. 1: auto 2: manual 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectional ingress node. The …
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.7
optixTunnelTpOamMepCcTime
This object indicates the CC packet period. 1: 3.33ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes 255: invalid
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.8
optixTunnelTpOamMepCcPri
This object indicates the CC priority. Valid values range from 0 to 7. 0xff: invalid
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.9