optixTunnelTpOamMepPKTLength

OPTIX-MPLSTP-OAM-MIB · .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.31
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates that setting the length is invalid.

Context

MIB
OPTIX-MPLSTP-OAM-MIB
OID
.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.31
Type
column
Access
readwrite
Status
current
Parent
optixTunnelTpOamMepEntry
Table
optixTunnelTpOamMepTable
Siblings
36

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optixTunnelTpOamMepIndex
This object indicates the tunnel OAM MEP index, ranging from 1 to 0x00ffffff.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.1
optixTunnelTpOamMepCcSend
This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional ingress node. The queried val…
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.10
optixTunnelTpOamMepSf
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.11
optixTunnelTpOamMepSd
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.12
optixTunnelTpOamMepMegInfo
This object indicates the MEG ID, which is a character string.
columnOctetString.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.13
optixTunnelTpOamMepLckEnable
This object indicates the locking status. 1: enable 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.14
optixTunnelTpOamMepLckTime
This object indicates theLCK packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6:60000 ms (1 minute) 7: 600000 ms(10min)
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.15
optixTunnelTpOamMepLckPri
This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates thatthe priority is synchronized with the CC packet priority.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.16
optixTunnelTpOamMepAisEnable
This object indicates whether the AIS is enabled. 1: enable 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.17
optixTunnelTpOamMepAisTime
This object indicates the AIS packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes)
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.18
optixTunnelTpOamMepAisPri
This object indicates the AIS packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.19
optixTunnelTpOamMepEnable
This object indicates whether the OAM is enabled. 1: enable 0: disable
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.2
optixTunnelTpOamMepLmMode
This object indicates the LM packet mode. 0: standard 1: Huawei
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.20
optixTunnelTpOamMepRevTnliIndex
This object indicates the reverse tunnel index. This parameter is applicable only when the tunnel serves as an egress node. When the value is 0xffffffff, the reverse tunnel index …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.21
optixTunnelTpOamMepStandard
This object indicates the OAM protocol standard. 1: 1711,2: 1731
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.22
optixTunnelTpOamMepGalMode
This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label)
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.23
optixTunnelTpOamMepTSTState
This parameter indicates the sending status of TST packets. 0:stop 1:testing.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.24
optixTunnelTpOamMepRCVPKTNum
This parameter indicates the total number of received TST packets.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.25
optixTunnelTpOamMepSendPKTNum
This parameter indicates the total number of sent TST packets.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.26
optixTunnelTpOamMepMISCRCNum
This parameter indicates the number of received CRC error TST packets.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.27
optixTunnelTpOamMepMISCodeNum
This parameter indicates the number of received TST packets with error codes.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.28
optixTunnelTpOamMepMISOrderNum
This parameter indicates the number of received TST packets with error orders.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.29
optixTunnelTpOamMepLevel
This object indicates the MEG level. Default: 7. Valid values range from 0 to 7.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.3
optixTunnelTpOamMepClrTSTDir
This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&receive 1: receive 2: send
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.30
optixTunnelTpOamMepTimeSpace
This parameter indicates the TST testing interval.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.32
optixTunnelTpOamMepPrio
This parameter indicates the priority of TST testing.
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.33
optixTunnelTpOamMepTranskind
This parameter indicates the type of the transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.34
optixTunnelTpOamMepIsOffOper
This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.35
optixTunnelTpOamMepTSTRecvEn
This parameter indicates the receive enable status of TST packets.
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.36
optixTunnelTpOamMepprotocolformat
This object indicates the format of the protocol,1:standard,2:huawei
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.37
optixTunnelTpOamMepMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.4
optixTunnelTpOamMepId
This object indicates the MEP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.5
optixTunnelTpOamMepPeerId
This object indicates the remote MEP ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.6
optixTunnelTpOamMepCheckWay
This object indicates the OAM detection mode. 1: auto 2: manual 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectional ingress node. The …
columnEnumeration.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.7
optixTunnelTpOamMepCcTime
This object indicates the CC packet period. 1: 3.33ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes 255: invalid
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.8
optixTunnelTpOamMepCcPri
This object indicates the CC priority. Valid values range from 0 to 7. 0xff: invalid
columnUnsigned32.1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.9