optIfODUkTNimDirectionality

OPT-IF-MIB · .1.3.6.1.2.1.10.133.1.9.2.1.2
MIB view Table view

Object

column OptIfSinkOrSource 
Specifies the monitor point for the ODUk TCM non-intrusive
monitoring function.  The value source(2) is not allowed
if the corresponding instance of optIfODUkDirectionality
has the value sink(1), and the value sink(1) is not allowed
if the corresponding instance of optIfODUkDirectionality
has the value source(2).  Either the value sink(1) or
source(2) is allowed if the corresponding instance of
optIfODUkDirectionality has the value bidirectional(3).
The value sink(1) means monitoring at the sink direction
TCM signal of the ODUk CTP.
The value source(2) means monitoring at the source direction
path signal of the ODUk CTP.

Context

MIB
OPT-IF-MIB
OID
.1.3.6.1.2.1.10.133.1.9.2.1.2
Type
column
Access
noaccess
Status
current
Parent
optIfODUkTNimConfigEntry
Table
optIfODUkTNimConfigTable
Siblings
10

Syntax

OptIfSinkOrSource
Source
OptIfSinkOrSource
Base type
Enumeration

Values & Constraints

Type Values
1sink
2source

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
optIfODUkTNimTcmField
Indicates the tandem connection monitoring field of the ODUk OH on which non-intrusive monitoring is performed. Valid values are integers from 1 to 6.
columnUnsigned32.1.3.6.1.2.1.10.133.1.9.2.1.1
optIfODUkTNimCurrentStatus
Indicates the defect condition of the entity, if any. The value of this object is unspecified if optIfODUkTNimRowStatus has any value other than active(1).
columnBits.1.3.6.1.2.1.10.133.1.9.2.1.10
optIfODUkTNimRowStatus
This columnar object is used for creating and deleting a conceptual row of the optIfODUkTNim config table. It is used to model the addTCM and removeTCM operations of an ODUk_CTP o…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.133.1.9.2.1.11
optIfODUkTNimDAPIExpected
The DAPI expected by the receiver. This object has no effect if optIfODUkTNimTIMDetMode has the value off(1) or sapi(3).
columnOptIfExDAPI.1.3.6.1.2.1.10.133.1.9.2.1.3
optIfODUkTNimSAPIExpected
The SAPI expected by the receiver. This object has no effect if optIfODUkTNimTIMDetMode has the value off(1) or dapi(2).
columnOptIfExSAPI.1.3.6.1.2.1.10.133.1.9.2.1.4
optIfODUkTNimTraceIdentifierAccepted
The actual trace identifier accepted. The value of this object is unspecified if optIfODUkTNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if optIf…
columnOptIfAcTI.1.3.6.1.2.1.10.133.1.9.2.1.5
optIfODUkTNimTIMDetMode
Indicates the mode of the Trace Identifier Mismatch (TIM) Detection function.
columnOptIfTIMDetMode.1.3.6.1.2.1.10.133.1.9.2.1.6
optIfODUkTNimTIMActEnabled
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.133.1.9.2.1.7
optIfODUkTNimDEGThr
Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that secon…
columnpercentage OptIfDEGThr.1.3.6.1.2.1.10.133.1.9.2.1.8
optIfODUkTNimDEGM
Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if optIfODUkTNimDEGM consecutive bad PM Seconds are detected.
columnOptIfDEGM.1.3.6.1.2.1.10.133.1.9.2.1.9