optIfODUkTNimDAPIExpected
OPT-IF-MIB ·
.1.3.6.1.2.1.10.133.1.9.2.1.3
Object
column
r/w
OptIfExDAPI
The DAPI expected by the receiver. This object has no effect if optIfODUkTNimTIMDetMode has the value off(1) or sapi(3).
Context
- MIB
- OPT-IF-MIB
- OID
.1.3.6.1.2.1.10.133.1.9.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- optIfODUkTNimConfigEntry
- Table
- optIfODUkTNimConfigTable
- Siblings
- 10
Syntax
OptIfExDAPI
- Source
- OptIfExDAPI
- Base type
OctetString
Values & Constraints
Type Constraints
range: 16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optIfODUkTNimTcmField Indicates the tandem connection monitoring
field of the ODUk OH on which non-intrusive monitoring
is performed. Valid values are
integers from 1 to 6. | column | Unsigned32 | .1.3.6.1.2.1.10.133.1.9.2.1.1 |
| optIfODUkTNimCurrentStatus Indicates the defect condition of the entity, if any.
The value of this object is unspecified if
optIfODUkTNimRowStatus has any value other than
active(1). | column | Bits | .1.3.6.1.2.1.10.133.1.9.2.1.10 |
| optIfODUkTNimRowStatus This columnar object is used for creating and deleting a
conceptual row of the optIfODUkTNim config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CTP o… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.133.1.9.2.1.11 |
| optIfODUkTNimDirectionality Specifies the monitor point for the ODUk TCM non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of optIfODUkDirectionality
has th… | column | OptIfSinkOrSource | .1.3.6.1.2.1.10.133.1.9.2.1.2 |
| optIfODUkTNimSAPIExpected The SAPI expected by the receiver.
This object has no effect if optIfODUkTNimTIMDetMode has
the value off(1) or dapi(2). | column | OptIfExSAPI | .1.3.6.1.2.1.10.133.1.9.2.1.4 |
| optIfODUkTNimTraceIdentifierAccepted The actual trace identifier accepted. The value of
this object is unspecified if optIfODUkTNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if optIf… | column | OptIfAcTI | .1.3.6.1.2.1.10.133.1.9.2.1.5 |
| optIfODUkTNimTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function. | column | OptIfTIMDetMode | .1.3.6.1.2.1.10.133.1.9.2.1.6 |
| optIfODUkTNimTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.9.2.1.7 |
| optIfODUkTNimDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that secon… | column | percentage OptIfDEGThr | .1.3.6.1.2.1.10.133.1.9.2.1.8 |
| optIfODUkTNimDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkTNimDEGM
consecutive bad PM Seconds are detected. | column | OptIfDEGM | .1.3.6.1.2.1.10.133.1.9.2.1.9 |