optIfODUkTDEGThr
OPT-IF-MIB ·
.1.3.6.1.2.1.10.133.1.9.1.1.9
Object
column
r/w
percentage OptIfDEGThr
Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that second is
greater than or equal to optIfODUkTDEGThr.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDirectionality has the value sink(1) and
optIfODUkTCodirectional has the value true(1), or
(iii) optIfODUkDirectionality has the value source(3) and
optIfODUkTCodirectional has the value false(2).
It must not be instantiated in rows for all other cases.
The default value of this object is Severely Errored Second
(SES) Estimator (See ITU-T G.7710).
Context
- MIB
- OPT-IF-MIB
- OID
.1.3.6.1.2.1.10.133.1.9.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Units
- percentage
- Parent
- optIfODUkTConfigEntry
- Table
- optIfODUkTConfigTable
- Siblings
- 14
Syntax
percentage OptIfDEGThr
- Source
- OptIfDEGThr
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 1..100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| optIfODUkTTcmField Indicates the tandem connection monitoring
field of the ODUk OH. Valid values are
integers from 1 to 6. | column | Unsigned32 | .1.3.6.1.2.1.10.133.1.9.1.1.1 |
| optIfODUkTDEGM Indicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkTDEGM
consecutive bad PM Seconds are detected.
This object is ap… | column | OptIfDEGM | .1.3.6.1.2.1.10.133.1.9.1.1.10 |
| optIfODUkTSinkMode This variable specifies the TCM mode at the entity.
The value operational(1) means that TCM Overhead (TCMOH)
processes (see ITU-T G.798) shall be
performed and consequent actions … | column | Enumeration | .1.3.6.1.2.1.10.133.1.9.1.1.11 |
| optIfODUkTSinkLockSignalAdminState Provides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the ODUKT sink. When
a Tandem Connection endpoint is set to admin state loc… | column | Enumeration | .1.3.6.1.2.1.10.133.1.9.1.1.12 |
| optIfODUkTSourceLockSignalAdminState Provides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the source.
When a Tandem Connection endpoint is set to admin state
locked, … | column | Enumeration | .1.3.6.1.2.1.10.133.1.9.1.1.13 |
| optIfODUkTCurrentStatus Indicates the defect condition of the entity, if any.
This object is applicable only when either one of the
following three cases holds:
(i) optIfODUkDirectionality has the valu… | column | Bits | .1.3.6.1.2.1.10.133.1.9.1.1.14 |
| optIfODUkTRowStatus This columnar object is used for creating and deleting a
conceptual row of the optIfODUkT config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CTP or O… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.133.1.9.1.1.15 |
| optIfODUkTCodirectional Indicates the directionality of the ODUkT termination point with
respect to the associated ODUk CTP. The value true(1) means
that the sink part of the ODUkT TP extracts TCM data … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.9.1.1.2 |
| optIfODUkTTraceIdentifierTransmitted The trace identifier transmitted.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDir… | column | OptIfTxTI | .1.3.6.1.2.1.10.133.1.9.1.1.3 |
| optIfODUkTDAPIExpected The DAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDi… | column | OptIfExDAPI | .1.3.6.1.2.1.10.133.1.9.1.1.4 |
| optIfODUkTSAPIExpected The SAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDi… | column | OptIfExSAPI | .1.3.6.1.2.1.10.133.1.9.1.1.5 |
| optIfODUkTTraceIdentifierAccepted The actual trace identifier accepted.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODU… | column | OptIfAcTI | .1.3.6.1.2.1.10.133.1.9.1.1.6 |
| optIfODUkTTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the va… | column | OptIfTIMDetMode | .1.3.6.1.2.1.10.133.1.9.1.1.7 |
| optIfODUkTTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is applicable only to the following three cases.
(i) optIfODUkDirectiona… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.133.1.9.1.1.8 |