ostElpsInstanceCfgProtectionMdIndex
OMNITRON-G8031-MIB ·
.1.3.6.1.4.1.7342.10.1.3.2.1.20
Object
This object specifies the Protection MEP ELPS instance maintenance
domain index.
The value is ignored for ostElpsInstanceCfgScopeType 'port' or 'evc'.
It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScopeType is 'mep'.
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- OMNITRON-G8031-MIB
- OID
.1.3.6.1.4.1.7342.10.1.3.2.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostElpsInstanceCfgEntry
- Table
- ostElpsInstanceCfgTable
- Siblings
- 26
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostElpsInstanceCfgIndex An index to the ELPS Instance Configuration table which indicates
the specific ELPS instance for the module.
ostElpsGlobalCfgNextIndex needs to be inspected to find… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.1 |
| ostElpsInstanceCfgWaitToRestoreTime This object specifies the wait to restore time in minutes.
This object can be written/modified after row creation time. | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.10 |
| ostElpsInstanceCfgApsRate This object specifies the time between APS frames in seconds.
This object is only used when the APS frame transmission is enabled.
This object can be… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.11 |
| ostElpsInstanceCfgApsToSend This object specifies the number of APS frames to send that are
separated by a minimum delay when a protection switch occurs.
This object is only used when the APS … | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.12 |
| ostElpsInstanceCfgScopeType This object selects the specific scope type of the ELPS instance.
port(1) ELPS instance is port based
evc(2) ELPS instance is EVC based
mep(3) E… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.3.2.1.13 |
| ostElpsInstanceCfgEvc This object defines which EVC the ELPS instance is associated with.
It must be configured if ostElpsInstanceCfgScopeType is 'evc', 'mep'.
It is ignored for other instance types.
… | column | OMNITRON-TC-MIBOstEvcNameStringOrNone | .1.3.6.1.4.1.7342.10.1.3.2.1.14 |
| ostElpsInstanceCfgVid This object defines which specific VID the ELPS instance is associated
with. It is deprecated and should not be used.
This object can only be written at row creatio… | column | OMNITRON-TC-MIBOstVlanId | .1.3.6.1.4.1.7342.10.1.3.2.1.15 |
| ostElpsInstanceCfgPriority This object specifies the ELPS instance PCP value (tag priority) on
the generated APS PDU.
This object can only be written at row creation time and cannot be
modifi… | column | IEEE8021-TC-MIBIEEE8021PriorityValue | .1.3.6.1.4.1.7342.10.1.3.2.1.16 |
| ostElpsInstanceCfgWorkingMdIndex This object specifies the Working MEP ELPS instance maintenance
domain index.
The value is ignored for ostElpsInstanceCfgScopeType 'port' or 'evc'.
I… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.17 |
| ostElpsInstanceCfgWorkingMaIndex This object specifies the Working MEP ELPS instance maintenance
association index.
It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScopeTyp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.18 |
| ostElpsInstanceCfgWorkingMepId This object specifies the Working MEP ELPS instance Maintenance End
Point Identifier.
It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScope… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.7342.10.1.3.2.1.19 |
| ostElpsInstanceCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7342.10.1.3.2.1.2 |
| ostElpsInstanceCfgProtectionMaIndex This object specifies the Protection MEP ELPS instance maintenance
association index.
It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScope… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.21 |
| ostElpsInstanceCfgProtectionMepId This object specifies the Protection MEP ELPS instance Maintenance End
Point Identifier.
It is mandatory to be configured with a valid value if
ostElpsInstanceCfgSc… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.7342.10.1.3.2.1.22 |
| ostElpsInstanceCfgProtectionType This object selects the protection type of the ELPS instance.
This object can only be written at row creation time and cannot be
modified once it has been created. | column | OMNITRON-TC-MIBOstElpsProtectType | .1.3.6.1.4.1.7342.10.1.3.2.1.23 |
| ostElpsInstanceCfgRevertive This object specifies whether the ELPS instance is revertive or
non-revertive. Revertive indicates whether the working link becomes
active after it is restored.
The… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.3.2.1.24 |
| ostElpsInstanceCfgManualMode This object selects the protection instance manual mode. When written the
indicated manual mode is selected.
nocommand(0) no command is indicated, read-only value… | column | Enumeration | .1.3.6.1.4.1.7342.10.1.3.2.1.25 |
| ostElpsInstanceCfgClearStatistics This object when written clears the statistic counters associated with
a specific protection instance. When read the value always returns
'false'.
Writing this valu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.3.2.1.26 |
| ostElpsInstanceCfgEvcProtected This object defines which EVC the protected ELPS port is
associated with. If uninitialized (null length string) or is the same
value as ostElpsInstanceCfgEvc then this object indi… | column | OMNITRON-TC-MIBOstEvcNameStringOrNone | .1.3.6.1.4.1.7342.10.1.3.2.1.27 |
| ostElpsInstanceCfgProfileEnable This object specifies whether the ELPS profile is enabled for
the ELPS instance.
The value 'true' indicates the ELPS profile instance is enabled.
The… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.3.2.1.3 |
| ostElpsInstanceCfgHoldOffEnable This object specifies whether the ELPS holdoff function is
enabled for the ELPS instance.
The value 'true' indicates the ELPS holdoff instance function is
enabled.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.3.2.1.4 |
| ostElpsInstanceCfgWaitToRestoreEnable This object specifies whether the ELPS wait to restore function is
enabled for the ELPS instance.
The value 'true' indicates the ELPS wait to restore instance funct… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.10.1.3.2.1.5 |
| ostElpsInstanceCfgProtectionName ELPS instance profile name.
This object may not be modified after creation. | column | OMNITRON-TC-MIBOstProfileNameString | .1.3.6.1.4.1.7342.10.1.3.2.1.6 |
| ostElpsInstanceCfgProtectionPortNumber This object selects the protection port number for the specific ELPS
instance that is configured.
This object can only be written at row creation time and cannot be… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.10.1.3.2.1.7 |
| ostElpsInstanceCfgWorkingPortNumber This object selects the working port number for the specific ELPS
instance that is configured.
This object can only be written at row creation time and cannot be
mo… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.10.1.3.2.1.8 |
| ostElpsInstanceCfgHoldOffTime This object specifies the hold-off time in 0.1 seconds.
A value of 0 indicates there is no hold-off time.
This object can be written/modified after r… | column | Unsigned32 | .1.3.6.1.4.1.7342.10.1.3.2.1.9 |