ostDs1ModuleOutbandLoopbackActivationUserDefinedCode
OMNITRON-DS1-MIB ·
.1.3.6.1.4.1.7342.9.1.2.1.1.7
Object
column
r/w
OctetString
Set the user defined outband loopback activation code. The format of the value of this object is a 6 ASCII character long text string of '0' and '1' characters. The 6 bits are used to generate the 8 bit user defined code, 0xxxxxx0. This object is used when ostDs1ModuleInbandLoopbackDeactivation is set to userdefined(4).
Context
- MIB
- OMNITRON-DS1-MIB
- OID
.1.3.6.1.4.1.7342.9.1.2.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostDs1ModuleSettingsEntry
- Table
- ostDs1ModuleSettingsTable
- Siblings
- 14
Syntax
OctetString
Values & Constraints
Object Constraints
range: 6-6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostDs1ModuleIndex The module chassis and slot numbers.
Base 10 Format: CCSS where
CC is the chassis index, 1 to 99
SS is the slot index, 1 to 99 | column | OMNITRON-TC-MIBOstModuleSingleIndex | .1.3.6.1.4.1.7342.9.1.2.1.1.1 |
| ostDs1ModuleClockMode This object sets the clock draft mode.
standard(1) sets the standard clock drift mode for Stratum 3 or better
general(2) sets the general clock mode … | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.10 |
| ostDs1ModuleLoopbackTimeout This object specifies the loopback timeout in minutes.
A value of 0 indicates there is no loopback timeout. | column | minutes Unsigned32 | .1.3.6.1.4.1.7342.9.1.2.1.1.11 |
| ostDs1ModuleOneClockMode This object sets the internal module clock source if DIP switch 22 is
OFF. If DIP switch 22 is ON the value of this object is ignored.
t1RemoteSource(1) sets th… | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.12 |
| ostDs1ModuleAisGeneration This object sets the module to generate AIS when an AIS condition is
detected.
aisEnabled(1) Enables the generation of AIS
aisDisabled(2) Disables th… | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.13 |
| ostDs1ModuleAisDetectionTime This object specifies the amount time that an AIS condition must be
valid when AIS is not being generated before an AIS is generated by the
module. | column | seconds Unsigned32 | .1.3.6.1.4.1.7342.9.1.2.1.1.14 |
| ostDs1ModuleAisGenerationTime This object specifies the amount time that an AIS will be generated when
a valid AIS condition has been detected for the amount of time indicated
by ostDs1ModuleAisDetectionTime. | column | seconds Unsigned32 | .1.3.6.1.4.1.7342.9.1.2.1.1.15 |
| ostDs1ModuleInbandLoopbackActivationCode Set the inband loopback activation code.
fac1(1) = FAC1 (1100)
fac2(2) = FAC2 (11000)
fac3(3) = FAC3 (10000)
userdefined(4) = xxxxxxxx
disabled(5) = disabl… | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.2 |
| ostDs1ModuleInbandLoopbackActivationUserDefinedCode Set the user defined inband loopback activation code.
The format of the value of this object is a text string of '0' and '1' ASCII characters from 3 to 8 characters long.
This obj… | column | OctetString | .1.3.6.1.4.1.7342.9.1.2.1.1.3 |
| ostDs1ModuleInbandLoopbackDeactivationCode Set the inband loopback deactivation code.
fac1(1) = FAC1 (1110)
fac2(2) = FAC2 (11100)
fac3(3) = FAC3 (100)
userdefined(4) = xxxxxxxx
disabled(5) = disabl… | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.4 |
| ostDs1ModuleInbandLoopbackDeactivationUserDefinedCode Set the user defined inband loopback deactivation code.
The format of the value of this object is a text string of '0' and '1' ASCII characters from 3 to 8 characters long.
This o… | column | OctetString | .1.3.6.1.4.1.7342.9.1.2.1.1.5 |
| ostDs1ModuleOutbandLoopbackActivationCode Set the outband loopback activation code.
payload(1) = Payload (00101000)
userdefined(2) = 0xxxxxx0
disabled(3) = disabled | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.6 |
| ostDs1ModuleOutbandLoopbackDeactivationCode Set the outband loopback deactivation code.
payload(1) = Payload (00100100)
userdefined(2) = 0xxxxxx0
disabled(3) = disabled | column | Enumeration | .1.3.6.1.4.1.7342.9.1.2.1.1.8 |
| ostDs1ModuleOutbandLoopbackDeactivationUserDefinedCode Set the user defined outband loopback deactivation code.
The format of the value of this object is a 6 ASCII character long text string of '0' and '1' characters.
The 6 bits are u… | column | OctetString | .1.3.6.1.4.1.7342.9.1.2.1.1.9 |