ostDs1ModuleAisDetectionTime

OMNITRON-DS1-MIB · .1.3.6.1.4.1.7342.9.1.2.1.1.14
MIB view Table view

Object

column r/w seconds Unsigned32 
This object specifies the amount time that an AIS condition must be
valid when AIS is not being generated before an AIS is generated by the
module.

Context

MIB
OMNITRON-DS1-MIB
OID
.1.3.6.1.4.1.7342.9.1.2.1.1.14
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
ostDs1ModuleSettingsEntry
Table
ostDs1ModuleSettingsTable
Siblings
14

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints
range: 0-3600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ostDs1ModuleIndex
The module chassis and slot numbers. Base 10 Format: CCSS where CC is the chassis index, 1 to 99 SS is the slot index, 1 to 99
columnOMNITRON-TC-MIBOstModuleSingleIndex.1.3.6.1.4.1.7342.9.1.2.1.1.1
ostDs1ModuleClockMode
This object sets the clock draft mode. standard(1) sets the standard clock drift mode for Stratum 3 or better general(2) sets the general clock mode …
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.10
ostDs1ModuleLoopbackTimeout
This object specifies the loopback timeout in minutes. A value of 0 indicates there is no loopback timeout.
columnminutes Unsigned32.1.3.6.1.4.1.7342.9.1.2.1.1.11
ostDs1ModuleOneClockMode
This object sets the internal module clock source if DIP switch 22 is OFF. If DIP switch 22 is ON the value of this object is ignored. t1RemoteSource(1) sets th…
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.12
ostDs1ModuleAisGeneration
This object sets the module to generate AIS when an AIS condition is detected. aisEnabled(1) Enables the generation of AIS aisDisabled(2) Disables th…
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.13
ostDs1ModuleAisGenerationTime
This object specifies the amount time that an AIS will be generated when a valid AIS condition has been detected for the amount of time indicated by ostDs1ModuleAisDetectionTime.
columnseconds Unsigned32.1.3.6.1.4.1.7342.9.1.2.1.1.15
ostDs1ModuleInbandLoopbackActivationCode
Set the inband loopback activation code. fac1(1) = FAC1 (1100) fac2(2) = FAC2 (11000) fac3(3) = FAC3 (10000) userdefined(4) = xxxxxxxx disabled(5) = disabl…
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.2
ostDs1ModuleInbandLoopbackActivationUserDefinedCode
Set the user defined inband loopback activation code. The format of the value of this object is a text string of '0' and '1' ASCII characters from 3 to 8 characters long. This obj…
columnOctetString.1.3.6.1.4.1.7342.9.1.2.1.1.3
ostDs1ModuleInbandLoopbackDeactivationCode
Set the inband loopback deactivation code. fac1(1) = FAC1 (1110) fac2(2) = FAC2 (11100) fac3(3) = FAC3 (100) userdefined(4) = xxxxxxxx disabled(5) = disabl…
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.4
ostDs1ModuleInbandLoopbackDeactivationUserDefinedCode
Set the user defined inband loopback deactivation code. The format of the value of this object is a text string of '0' and '1' ASCII characters from 3 to 8 characters long. This o…
columnOctetString.1.3.6.1.4.1.7342.9.1.2.1.1.5
ostDs1ModuleOutbandLoopbackActivationCode
Set the outband loopback activation code. payload(1) = Payload (00101000) userdefined(2) = 0xxxxxx0 disabled(3) = disabled
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.6
ostDs1ModuleOutbandLoopbackActivationUserDefinedCode
Set the user defined outband loopback activation code. The format of the value of this object is a 6 ASCII character long text string of '0' and '1' characters. The 6 bits are use…
columnOctetString.1.3.6.1.4.1.7342.9.1.2.1.1.7
ostDs1ModuleOutbandLoopbackDeactivationCode
Set the outband loopback deactivation code. payload(1) = Payload (00100100) userdefined(2) = 0xxxxxx0 disabled(3) = disabled
columnEnumeration.1.3.6.1.4.1.7342.9.1.2.1.1.8
ostDs1ModuleOutbandLoopbackDeactivationUserDefinedCode
Set the user defined outband loopback deactivation code. The format of the value of this object is a 6 ASCII character long text string of '0' and '1' characters. The 6 bits are u…
columnOctetString.1.3.6.1.4.1.7342.9.1.2.1.1.9