oaLdCardPortsRate

OADWDM-MIB · .1.3.6.1.4.1.6926.1.41.8.1.1.22
MIB view Table view

Object

column mandatory r/w RateMode

No description available.

Context

MIB
OADWDM-MIB
OID
.1.3.6.1.4.1.6926.1.41.8.1.1.22
Type
column
Access
readwrite
Status
mandatory
Parent
oaLdCardPortsStatEntry
Table
oaLdCardPortsStatTable
Siblings
45

Syntax

RateMode
Source
RateMode
Base type
Enumeration

Values & Constraints

Type Values
1other
2oc3
3oc3c
4oc12au3
5oc12c
6oc12au4
7fiberChannel1062
8fiberChannel2125
9oc48
10oc48c
11eth10giga
12oc192
13stm64
14stm16
15fiberChannel10519
16eth10gigaWan
17eth10gigaDi
18eth100M
19eth1giga
20fiberChannel4250
21otu0
22otu1
23otu2
24sdi143
25sdi270
26sdi360
27hdsdi
28sdi3g
29otu3
30oc768
31stm256
32eth40giga
33hd1001sdi
34sdi177
35sdi540
36dvbasi
37smpte292
38eth10M
39escon
40fiberChannel256
41fiberChannel531
42bypass
43gm2-eth
44gm2-fc
45e3
46cpri614
47cpri1228
48cpri2457
49cpri3072
50cpri4915
51fiberChannel8giga

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oaLdCardPortsSlotNumber mandatory
The slot#. An index from 1 to The number of slots
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.1
oaLdCardPortsCounters mandatory
When read : 1 - Counter feature is NOT supported 2 - Counter feature is supported 4 - Extended ethernet counters are supported When write: 3 - Clear all port conters
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.12
oaLdCardPortsCounter1Low mandatory
The number of bytes received at the port. This object returns the least significant 32 bits of a 64 bits counter. To calculate the actual counter reading, use the following formul…
columnRFC1155-SMICounter.1.3.6.1.4.1.6926.1.41.8.1.1.14
oaLdCardPortsCounter1High mandatory
The number of bytes received at the port. This object returns the most significant 32 bits of a 64 bits counter. To calculate the actual counter reading, use the following formula…
columnRFC1155-SMICounter.1.3.6.1.4.1.6926.1.41.8.1.1.15
oaLdCardPortsCounter2Low mandatory
The number of error bytes received at the port. This object returns the least significant 32 bits of a 64 bits counter. To calculate the actual counter reading, use the following …
columnRFC1155-SMICounter.1.3.6.1.4.1.6926.1.41.8.1.1.17
oaLdCardPortsCounter2High mandatory
The number of error bytes received at the port. This object returns the most significant 32 bits of a 64 bits counter. To calculate the actual counter reading, use the following f…
columnRFC1155-SMICounter.1.3.6.1.4.1.6926.1.41.8.1.1.18
oaLdCardPortsPortNumber mandatory
The port#. An index from 1 to The number of ports
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.2
oaLdCardPortsConnectorType mandatory
Port Connector Types: other - 1 - Unknown type of connector static- 2 - Not Changeable (fix) type of connector gbic - 3 - GBIC type of connector sfp - 4 - SFP type of connecto…
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.20
oaLdCardPortsConnectorSubType mandatory
Port Connector Physical Sub Type: other -1 - Unknown or N/A Connector's connectivity Type rj45 -2 - Copper RJ45 sc -3 - Regular Fibre Optic [FO] lc -4 - LC mtrj …
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.21
oaLdCardPortsLineLength mandatory
T1 ports line length: other - 1 - Unknown line length from0to133 - 2 - line length 0 - 133 ft. (0.6 dB) from133to266 - 3 - line length 133 - 266 ft. (1.2 dB) from266to399…
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.23
oaLdCardPortsAccessLinState mandatory
Port LIN status. Indicates the Port access LIN status. 2 - Enable - Access LIN is enabled 3 - Disable - Access LIN is disabled
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.24
oaLdCardPortsFlowControlMode mandatory
Module Flow Control Mode. Indicates the flow control mode for 10GbE access. 2 - Enable - Flow Control is enabled 3 - Disable - Flow Control is disabled
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.25
oaLdCardPortsDryContactStat mandatory
Port Dry Contact State. Indicates the Port Dry Contact State. 2 - open - Dry Contact is open 3 - close - Dry Contact is close
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.26
oaLdCardPortsPowerTuning mandatory
Port Power Tuning in dB of the E&M signal. (20) is returned if this value is undefined.
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.27
oaLdCardPortsMediaType mandatory
Type of Media.
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.28
oaLdCardPortsEMCfgOperation mandatory
Specify the operation of the E&M signal. twoWires - 2-wire operation. fourWires - 4-wire operation.
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.29
oaLdCardPortsLink mandatory
Indicates the link status of the port 2 - link on 3 - link off
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.3
oaLdCardPortsEyemaxState mandatory
EyeMax state mode, (applicable only for ports that support this (EYEMAX) features) other - Port does not support this feature, disable - no Eyemax mode, scanning - start scan proc…
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.30
oaLdCardPortsEyemaxOperFactor mandatory
EyeMax Operational Calibrate factor, This value represents current DAC output. When this feature is not supported (0) is returned. Units: percent.
columnpercent Integer32.1.3.6.1.4.1.6926.1.41.8.1.1.31
oaLdCardPortsEyemaxAdminFactor mandatory
EyeMax Administrative Calibration factor, This value is represents the value to be set into DAC. After scan operation it holds the optimal value that should be set into DAC. Users…
columnpercent Integer32.1.3.6.1.4.1.6926.1.41.8.1.1.32
oaLdCardPortsFefMode mandatory
Port Far End Failure (FEF) Detection mode. 2 - Enable - FEF is enabled 3 - Disable - FEF is disabled
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.33
oaLdCardPortsOdu1Index mandatory
For clients that mapped into the OTN payload. Indicates the index of the OPU-1 payload area. 0 - not supported, or client is not configured. 1 - Client mapped into OPU-1 #1 paylo…
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.34
oaLdCardPortsOdu1TsIndex mandatory
For clients that mapped into the OTN payload. Indicates the tributary slot index among the 16 tributary slots, of the OPU-1 payload area. 0 - not supported, or client is not…
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.35
oaLdCardPortsPmMode mandatory
Port Performance Monitoring Mode. Indicates the Port Performance Monitoring mode. 2 - Enable - PM is enabled for this port 3 - Disable - PM is disabled for tthis port
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.36
oaLdCardPortsFecMode mandatory
The Forward Error Correction (FEC) mode which is used in the selected port. 2 - g709 - Standard G.709 FEC mode. 3 - eFec - Enhanced FEC proprietary mode. 4 - byPass - Bypass FEC …
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.37
oaLdCardPortsLock mandatory
Port PLL lock mode. 2 - locked - PLL was locked, 3 - notlocked - PLL was not locked
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.38
oaLdCardPortsLaserMode mandatory
Port Laser Mode. Indicates the port laser mode. 2 - Enable - Laser is enabled 3 - Disable - Laser is disabled (can not transmit)
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.39
oaLdCardPortsActivity mandatory
Indicates the activety status of the port 2 - activety on 3 - activety off
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.4
oaLdCardPortsOdu1TsSize mandatory
For clients that mapped into the OTN payload. Indicates the number of tributary slots that are occupied by the client's rate. 0 - not supported, or client is not configured.
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.40
oaLdCardPortsSpeed mandatory
Ports speed mode.
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.41
oaLdCardPortsPriorityClockSource mandatory
Defines the port's priority in relation to the clock source. 1 defines the highest priority index and the last port index defines the least prioritized port. The highest priority…
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.42
oaLdCardPortsActionMode mandatorycolumnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.43
oaLdCardPortsOutputPortId mandatorycolumnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.44
oaLdCardPortsGroupId mandatorycolumnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.45
oaLdCardPortsChannelId mandatorycolumnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.46
oaLdCardPortsAutoShutdownMode mandatory
Port Auto Shutdown Mode. Indicates the port Auto Shutdown (eye safe) mode. 2 - Enable - Auto Shutdown mode is enabled 3 - Disable - Auto Shutdown mode is disabled.
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.47
oaLdCardPortsEymxScnAmpFctr mandatory
Initialization value for Amlification Factor used in the Eyemax scanning operation in 0.1 units.
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.48
oaLdCardPortsEymxScnAmpFctrMin mandatory
Minimum value that can be set for Initialization of the Amlification Factor used in the Eyemax scanning operation in 0.1 units.
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.49
oaLdCardPortsEymxScnAmpFctrMax mandatory
Maximum value that can be set for Initialization of the Amlification Factor used in the Eyemax scanning operation in 0.1 units.
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.50
oaLdCardPortsEymxScnDspComps mandatory
Initialization value for Dispersion Compensation used in the Eyemax scanning operation.
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.51
oaLdCardPortsEymxScnTreshold mandatory
Initialization value for Rx threshold used in the Eyemax scanning operation.
columnpercent Integer32.1.3.6.1.4.1.6926.1.41.8.1.1.52
oaLdCardPortsEymxScnOperComplt mandatory
Indication how much of the scanning operation have been already completed (in percents 0 - 100).
columnpercent Integer32.1.3.6.1.4.1.6926.1.41.8.1.1.53
oaLdCardPortsEymxScnResult mandatory
Indication if the scanning operation ended properly or finished with problems.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.6926.1.41.8.1.1.54
oaLdCardPortsWaveLength mandatory
The port laser wavelength (Lambda channel) in units of nm (Nanometer). Returns 0 when not applicable
columnInteger32.1.3.6.1.4.1.6926.1.41.8.1.1.6
oaLdCardPortsLoopBack mandatory
Transponder LoopBack state. Indicates the transponder LoopBack state. 2 - normal - Transponder card is in non-loopback state 3 - remoteLoopback - Transponder card …
columnEnumeration.1.3.6.1.4.1.6926.1.41.8.1.1.8