ntnQosIfQueueSize
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.9.2.1.9
Object
The size of the queue in bytes. Some devices set queue size
in terms of packets. These devices must calculate the queue
size in packets by assuming an average packet size suitable
for the particular interface.
Some devices have a fixed size buffer to be shared among all
queues. These devices must allocate a fraction of the
total buffer space to this queue calculated as the the ratio
of the queue size to the sum of the queue sizes for the
interface.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.9.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnQosIfQueueEntry
- Table
- ntnQosIfQueueTable
- Siblings
- 10
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQosIfQueueId An index that uniquely identifies an entry in the
ntnQosIfQueueTable. | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.9.2.1.1 |
| ntnQosIfQueueStorage The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.9.2.1.10 |
| ntnQosIfQueueStatus The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.9.2.1.11 |
| ntnQosIfQueueSetId An index that uniquely identifies a specific queue set. The
queue set that is identified with this value is associated
with an interface through the ntnQosIfAssignmentQueueSet
… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.2 |
| ntnQosIfQueueIndex An arbitrary index that uniquely identifies a specific
queue within a set of queues that is identified by the
ntnQosIfQueueSetId value. | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.3 |
| ntnQosIfQueueDiscipline This object identifies the queuing discipline that is
associated with the specified queue.
A value of fifo(1) indicates that the queue is serviced
on a first-in-fi… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.9.2.1.4 |
| ntnQosIfQueueDrainSize The maximum number of bytes that may be drained from the
queue in one cycle. The percentage of the interface
bandwidth allocated to this queue can be calculated from
this attribu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.5 |
| ntnQosIfQueueAbsBandwidth The maximum interface bandwidth that is available for
consumption when servicing this queue. This bandwidth is
specified in terms of kilobits per second.
This attri… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.6 |
| ntnQosIfQueueBandwidthAllocation This attribute specifies whether to configure the queue for
an absolute bandwidth limit or one that is relative to other
queues of the interface. i.e., whether to configure the qu… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.9.2.1.7 |
| ntnQosIfQueueServiceOrder This object is used to provide an additional level of
priority that is required for certain queuing disciplines
and when the different queues that comprise a queue set
are service… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.8 |