ntnQosIfQueueSetId
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.9.2.1.2
Object
column
r/w
Integer32
An index that uniquely identifies a specific queue set. The queue set that is identified with this value is associated with an interface through the ntnQosIfAssignmentQueueSet object in the ntnQosIfAssignmentTable. The individual queues that are members of this set all have the same value for this attribute (i.e., they have the same set ID).
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.9.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnQosIfQueueEntry
- Table
- ntnQosIfQueueTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQosIfQueueId An index that uniquely identifies an entry in the
ntnQosIfQueueTable. | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.9.2.1.1 |
| ntnQosIfQueueStorage The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.9.2.1.10 |
| ntnQosIfQueueStatus The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.9.2.1.11 |
| ntnQosIfQueueIndex An arbitrary index that uniquely identifies a specific
queue within a set of queues that is identified by the
ntnQosIfQueueSetId value. | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.3 |
| ntnQosIfQueueDiscipline This object identifies the queuing discipline that is
associated with the specified queue.
A value of fifo(1) indicates that the queue is serviced
on a first-in-fi… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.9.2.1.4 |
| ntnQosIfQueueDrainSize The maximum number of bytes that may be drained from the
queue in one cycle. The percentage of the interface
bandwidth allocated to this queue can be calculated from
this attribu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.5 |
| ntnQosIfQueueAbsBandwidth The maximum interface bandwidth that is available for
consumption when servicing this queue. This bandwidth is
specified in terms of kilobits per second.
This attri… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.6 |
| ntnQosIfQueueBandwidthAllocation This attribute specifies whether to configure the queue for
an absolute bandwidth limit or one that is relative to other
queues of the interface. i.e., whether to configure the qu… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.9.2.1.7 |
| ntnQosIfQueueServiceOrder This object is used to provide an additional level of
priority that is required for certain queuing disciplines
and when the different queues that comprise a queue set
are service… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.8 |
| ntnQosIfQueueSize The size of the queue in bytes. Some devices set queue size
in terms of packets. These devices must calculate the queue
size in packets by assuming an average packet size suitab… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.7.1.9.2.1.9 |