ntnQosDsAccessElemSrcPrefixLength

NTN-QOS-POLICY-EVOL-PIB · .1.3.6.1.4.1.45.4.7.1.13.2.1.6

Object

column r/w bits INET-ADDRESS-MIBInetAddressPrefixLength

The length of the CIDR Prefix carried in
ntnQosDsAccessElemSrcAddr. In IPv4 addresses, 
a length of 0 indicates a match of any address; 
a length of 32 indicates a match of a single host 
address, and a length between 0 and 32 indicates 
the use of a CIDR Prefix. IPv6 is similar, 
except that prefix lengths range from 0..128.

Context

MIB: NTN-QOS-POLICY-EVOL-PIB
OID: .1.3.6.1.4.1.45.4.7.1.13.2.1.6
Type: column
Access: readwrite
Status: current
Units: bits
Parent: ntnQosDsAccessElemEntry
Table: ntnQosDsAccessElemTable
Siblings: 22

Syntax

bits INET-ADDRESS-MIBInetAddressPrefixLength

Source: INET-ADDRESS-MIBInetAddressPrefixLength
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..2040

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ntnQosDsAccessElemId An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosDsAccessElemNextFree.	column	DIFFSERV-MIBIndexInteger	`.1.3.6.1.4.1.45.4.7.1.13.2.1.1`
ntnQosDsAccessElemDstL4PortMin The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.45.4.7.1.13.2.1.10`
ntnQosDsAccessElemDstL4PortMax The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the valu…	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.45.4.7.1.13.2.1.11`
ntnQosDsAccessElemSrcL4PortMin The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.45.4.7.1.13.2.1.12`
ntnQosDsAccessElemSrcL4PortMax The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value sp…	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.45.4.7.1.13.2.1.13`
ntnQosDsAccessElemActionDrop This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the packe…	column	Enumeration	`.1.3.6.1.4.1.45.4.7.1.13.2.1.14`
ntnQosDsAccessElemActionRemarkDscp This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with the value of this o…	column	Integer32	`.1.3.6.1.4.1.45.4.7.1.13.2.1.15`
ntnQosDsAccessElemActionRemarkCos This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this object. …	column	Enumeration	`.1.3.6.1.4.1.45.4.7.1.13.2.1.16`
ntnQosDsAccessElemActionSetPrec This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used…	column	Enumeration	`.1.3.6.1.4.1.45.4.7.1.13.2.1.17`
ntnQosDsAccessElemName A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same label.	column	OctetString	`.1.3.6.1.4.1.45.4.7.1.13.2.1.18`
ntnQosDsAccessElemBlock A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the same access element nam…	column	OctetString	`.1.3.6.1.4.1.45.4.7.1.13.2.1.19`
ntnQosDsAccessElemAddrType The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can…	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.45.4.7.1.13.2.1.2`
ntnQosDsAccessElemType Identifies the DS access element type. Designates the higher-level application through which this entry was created.	column	Enumeration	`.1.3.6.1.4.1.45.4.7.1.13.2.1.20`
ntnQosDsAccessElemStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. …	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.45.4.7.1.13.2.1.21`
ntnQosDsAccessElemStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.45.4.7.1.13.2.1.22`
ntnQosDsAccessElemEvalPrec An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applications.	column	Unsigned32	`.1.3.6.1.4.1.45.4.7.1.13.2.1.23`
ntnQosDsAccessElemDstAddr The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsAccessElemDstPrefixLength indicates…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.45.4.7.1.13.2.1.3`
ntnQosDsAccessElemDstPrefixLength The length of the CIDR Prefix carried in ntnQosDsAccessElemDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a sin…	column	bits INET-ADDRESS-MIBInetAddressPrefixLength	`.1.3.6.1.4.1.45.4.7.1.13.2.1.4`
ntnQosDsAccessElemSrcAddr The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsAccessElemSrcPrefixLength indicates the …	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.45.4.7.1.13.2.1.5`
ntnQosDsAccessElemDscp The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are consi…	column	DIFFSERV-DSCP-TCDscpOrAny	`.1.3.6.1.4.1.45.4.7.1.13.2.1.7`
ntnQosDsAccessElemFlowId The flow identifier in an IPv6 header.	column	FlowIdOrAny	`.1.3.6.1.4.1.45.4.7.1.13.2.1.8`
ntnQosDsAccessElemProtocol The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is rese…	column	Unsigned32	`.1.3.6.1.4.1.45.4.7.1.13.2.1.9`