ntnQosDsAccessElemSrcL4PortMin
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.13.2.1.12
Object
The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.13.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ntnQosDsAccessElemEntry
- Table
- ntnQosDsAccessElemTable
- Siblings
- 22
Syntax
INET-ADDRESS-MIBInetPortNumber
- Source
- INET-ADDRESS-MIBInetPortNumber
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntnQosDsAccessElemId An index that enumerates the access element
entries. Managers can obtain new values
for row creation in this table by reading
ntnQosDsAccessElemNextFree. | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.13.2.1.1 |
| ntnQosDsAccessElemDstL4PortMin The minimum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.2.1.10 |
| ntnQosDsAccessElemDstL4PortMax The maximum value that the layer-4 destination
port number in the packet must have in order
to match this classifier entry. This value must
be equal to or greater than the valu… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.2.1.11 |
| ntnQosDsAccessElemSrcL4PortMax The maximum value that the layer-4 source
port number in the packet must have in order
to match this classifier entry. This value
must be equal to or greater than the value
sp… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.7.1.13.2.1.13 |
| ntnQosDsAccessElemActionDrop This action attribute is used to specify
whether a packet should dropped or switched
(i.e., not dropped).
The value 'drop(1)', when specified, will
cause the packe… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.2.1.14 |
| ntnQosDsAccessElemActionRemarkDscp This action component, when specified,
will cause the value contained in the
Differentiated Services (DS) field of an
associated IP datagram to be updated
with the value of this o… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.2.1.15 |
| ntnQosDsAccessElemActionRemarkCos This action attribute, when specified,
will cause the value contained in the user
priority field of the 802.1Q frame to be
updated based on the value of this object.
… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.2.1.16 |
| ntnQosDsAccessElemActionSetPrec This action attribute, when specified,
will cause the packet being evaluated to
be associated with the specified relative
drop precedence. The relative drop
precedence may be used… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.2.1.17 |
| ntnQosDsAccessElemName A label used to reference the access element
in a textual manner. All related access elements
(e.g., those that comprise an access-list) must
have the same label. | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.2.1.18 |
| ntnQosDsAccessElemBlock A label used to identify access elements
that are members of the same classification
block. Access elements are members of the
same block if they share the same access element
nam… | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.2.1.19 |
| ntnQosDsAccessElemAddrType The type of IP address used by this access element
entry. While other types of addresses are
defined in the InetAddressType textual convention,
and DNS names, a classifier can… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.4.7.1.13.2.1.2 |
| ntnQosDsAccessElemType Identifies the DS access element type. Designates
the higher-level application through which this entry
was created. | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.2.1.20 |
| ntnQosDsAccessElemStorage The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.13.2.1.21 |
| ntnQosDsAccessElemStatus The status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.13.2.1.22 |
| ntnQosDsAccessElemEvalPrec An evaluation order attribute used to order
elements with the same name and to link elements
across DS and L2 Access Element tables. Only
used with NSNA applications. | column | Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.2.1.23 |
| ntnQosDsAccessElemDstAddr The IP address to match against the packet's
destination IP address. This may not be a DNS
name, but may be an IPv4 or IPv6 prefix.
ntnQosDsAccessElemDstPrefixLength indicates… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.4.7.1.13.2.1.3 |
| ntnQosDsAccessElemDstPrefixLength The length of the CIDR Prefix carried in
ntnQosDsAccessElemDstAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a sin… | column | bits INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.45.4.7.1.13.2.1.4 |
| ntnQosDsAccessElemSrcAddr The IP address to match against the packet's
source IP address. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
ntnQosDsAccessElemSrcPrefixLength indicates
the … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.4.7.1.13.2.1.5 |
| ntnQosDsAccessElemSrcPrefixLength The length of the CIDR Prefix carried in
ntnQosDsAccessElemSrcAddr. In IPv4 addresses,
a length of 0 indicates a match of any address;
a length of 32 indicates a match of a sing… | column | bits INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.4.1.45.4.7.1.13.2.1.6 |
| ntnQosDsAccessElemDscp The value that the DSCP in the packet must
have to match this entry. A value of -1
indicates that a specific DSCP value has not
been defined and thus all DSCP values are
consi… | column | DIFFSERV-DSCP-TCDscpOrAny | .1.3.6.1.4.1.45.4.7.1.13.2.1.7 |
| ntnQosDsAccessElemFlowId The flow identifier in an IPv6 header. | column | FlowIdOrAny | .1.3.6.1.4.1.45.4.7.1.13.2.1.8 |
| ntnQosDsAccessElemProtocol The IP protocol to match against the IPv4
protocol number or the IPv6 Next-Header number
in the packet. A value of 255 means match all.
Note the protocol number of 255 is rese… | column | Unsigned32 | .1.3.6.1.4.1.45.4.7.1.13.2.1.9 |