avFcoeRedirSrcId
NTN-QOS-POLICY-EVOL-PIB ·
.1.3.6.1.4.1.45.4.7.1.13.14.1.8
Object
column
r/w
FcId
This object specifies the Fibre Channel (FC) source ID (D_ID) that should be used when performing stream identification. Setting this attribute to it's default value indicates that S_ID data should not be used for traffic identification.
Context
- MIB
- NTN-QOS-POLICY-EVOL-PIB
- OID
.1.3.6.1.4.1.45.4.7.1.13.14.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- avFcoeRedirEntry
- Table
- avFcoeRedirTable
- Siblings
- 15
Syntax
FcId
- Source
- FcId
- Base type
OctetString
Values & Constraints
Type Constraints
range: 3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| avFcoeRedirId An index that enumerates the FCoE redirect
entries. Managers can obtain new values
for row creation in this table by reading
avFcoeRedirNextFree. | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.4.1.45.4.7.1.13.14.1.1 |
| avFcoeRedirActionUpdateSrcMac The 802 MAC address that will be used to update the
source MAC address in frames that are identified
based on filter data specified in this entry. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.14.1.10 |
| avFcoeRedirActionEgressInterface The interface through which frames identified based
on filter data specified in this entry will egress
the device. An egress interface or an egress trunk
must be specified. A valu… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.45.4.7.1.13.14.1.11 |
| avFcoeRedirName A label used to reference the FCoE redirect entry
in a textual manner. | column | OctetString | .1.3.6.1.4.1.45.4.7.1.13.14.1.12 |
| avFcoeRedirStorage The storage type for this conceptual row.
Conceptual rows having the value 'permanent'
need not allow write-access to any columnar
objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.7.1.13.14.1.13 |
| avFcoeRedirStatus The status of this conceptual row.
An entry may not exist in the active state
unless all objects in the entry have an
appropriate value. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.7.1.13.14.1.14 |
| avFcoeRedirProcessedFrames Counts the frames that have matched the criteria
specified in this entry. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.45.4.7.1.13.14.1.15 |
| avFcoeRedirActionEgressTrunkId The trunk through which frames identified based
on filter data specified in this entry will egress
the device. An egress interface or an egress trunk
must be specified. A value of… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.14.1.16 |
| avFcoeRedirDstId This object specifies the Fibre Channel (FC)
destination ID (D_ID) that should be used
when performing stream identification. | column | FcId | .1.3.6.1.4.1.45.4.7.1.13.14.1.2 |
| avFcoeRedirIngressInterfaceList This object identifies ingress interfaces,
using an interface's ifIndex representation,
to which the filter and action criteria
specified in this entry should be applied. | column | InterfaceList | .1.3.6.1.4.1.45.4.7.1.13.14.1.3 |
| avFcoeRedirVlanIdMin The minimum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this entry.
The avFcoeRedirVlanIdMin value must be less
than or equal to the… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.14.1.4 |
| avFcoeRedirVlanIdMax The maximum value that the VLAN ID (VID) in
a tagged packet must have in order to match
this entry.
The avFcoeRedirVlanIdMax value must be greater
than or equal to … | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.14.1.5 |
| avFcoeRedirUserPriority The 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when determining
… | column | Enumeration | .1.3.6.1.4.1.45.4.7.1.13.14.1.6 |
| avFcoeRedirEtherType This object specifies the value that will be
compared against the value contained in the
EtherType field of an IEEE 802 frame. Example
settings would include 'IP' (0x0800), 'FCoE'… | column | Integer32 | .1.3.6.1.4.1.45.4.7.1.13.14.1.7 |
| avFcoeRedirActionUpdateDstMac The 802 MAC address that will be used to update the
destination MAC address in frames that are identified
based on filter data specified in this entry. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.4.7.1.13.14.1.9 |