nbsStackVcdPortPair45TestStatus
NSTACK-MIB ·
.1.3.6.1.4.1.629.1.50.4.12.2.1.8
Object
column
mandatory
Enumeration
The VCD Test result for Pair of Wires 4 and 5 :
other=(1) - unknown;
good=(2) - the Cable is OK (no problem found);
testFail=(3)- the VCD Test was failed for some reason;
impedanceMismatch=(3)- the VCD Test found the impedance
problems in the Wires;
openCable=(5)-the VCD Test found the break in the Wire;
openCable=(6)-the VCD Test found the short circuit in
the Wire.
Context
- MIB
- NSTACK-MIB
- OID
.1.3.6.1.4.1.629.1.50.4.12.2.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- nbsStackVcdPortEntry
- Table
- nbsStackVcdPortTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | good |
3 | testFail |
4 | impedanceMismatch |
5 | openCable |
6 | shortCable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsStackVcdPortId mandatory The Port Id supported VCD feature in the Device.
The same as [ifIndex] in the MIB-II. | column | Integer32 | .1.3.6.1.4.1.629.1.50.4.12.2.1.1 |
| nbsStackVcdPortPair78TestStatus mandatory The VCD Test result for Pair of Wires 7 and 8 :
other=(1) - unknown;
good=(2) - the Cable is OK (no problem found);
testFail=(3)- the VCD Test was failed for some reason;
imp… | column | Enumeration | .1.3.6.1.4.1.629.1.50.4.12.2.1.10 |
| nbsStackVcdPortSupport mandatory Virtual Cable Diagnostics feature support (per Port). | column | Enumeration | .1.3.6.1.4.1.629.1.50.4.12.2.1.11 |
| nbsStackVcdPortTestTime mandatory The value of sysUpTime at the time of the last creation or
deletion of an entry in the ifTable. If the number of
entries has been unchanged since the last re-initialization
of th… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.629.1.50.4.12.2.1.12 |
| nbsStackVcdPortTestRun mandatory The Port VCD Test mode:
startVcdTest=(1) - used for SNMP SET operation
to run VCD Test;
testIsRunning=(2) - used for SNMP GET operation
… | column | Enumeration | .1.3.6.1.4.1.629.1.50.4.12.2.1.2 |
| nbsStackVcdPortPair12Distance mandatory The distance [in CM] to the Problem found with help
of VCD test into the Pair of Wires 1 and 2. | column | Integer32 | .1.3.6.1.4.1.629.1.50.4.12.2.1.3 |
| nbsStackVcdPortPair12TestStatus mandatory The VCD Test result for Pair of Wires 1 and 2 :
other=(1) - unknown;
good=(2) - the Cable is OK (no problem found);
testFail=(3)- the VCD Test was failed for some reason;
imp… | column | Enumeration | .1.3.6.1.4.1.629.1.50.4.12.2.1.4 |
| nbsStackVcdPortPair36Distance mandatory The distance [in CM] to the Problem found with help
of VCD test into the Pair of Wires 3 and 6. | column | Integer32 | .1.3.6.1.4.1.629.1.50.4.12.2.1.5 |
| nbsStackVcdPortPair36TestStatus mandatory The VCD Test result for Pair of Wires 3 and 6 :
other=(1) - unknown;
good=(2) - the Cable is OK (no problem found);
testFail=(3)- the VCD Test was failed for some reason;
imp… | column | Enumeration | .1.3.6.1.4.1.629.1.50.4.12.2.1.6 |
| nbsStackVcdPortPair45Distance mandatory The distance [in CM] to the Problem found with help
of VCD test into the Pair of Wires 4 and 5. | column | Integer32 | .1.3.6.1.4.1.629.1.50.4.12.2.1.7 |
| nbsStackVcdPortPair78Distance mandatory The distance [in CM] to the Problem found with help
of VCD test into the Pair of Wires 7 and 8. | column | Integer32 | .1.3.6.1.4.1.629.1.50.4.12.2.1.9 |