nqaReflectorIPAddressType
NQA-MIB ·
.1.3.6.1.4.1.2011.5.25.111.11.1.1.4
Object
This object indicates the type of an IP address.
Context
- MIB
- NQA-MIB
- OID
.1.3.6.1.4.1.2011.5.25.111.11.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nqaReflectorEntry
- Table
- nqaReflectorTable
- Siblings
- 21
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nqaReflectorID This object indicates the reflector ID, which is also the index of this table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.1 |
| nqaReflectorAgeTime This object indicates the aging time, in seconds.
Setting the value to 0 indicates reserving the reflector eternally. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.10 |
| nqaReflectorSourcePort This object indicates the UDP source port number. 0 means invalid UDP source port, it cannot be set but could be walked | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.11 |
| nqaReflectorDestinationPort This object indicates the UDP destination port number. 0 means invalid UDP source port, it cannot be set but could be walked | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.12 |
| nqaReflectorState This object indicates the status of the reflector.
1: active
2: not in service | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.11.1.1.13 |
| nqaReflectorSurvivalTime This object indicates the survival time of the reflector, in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.14 |
| nqaReflectorRecommendedTestMacAddress This object indicates the recommended test MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.111.11.1.1.15 |
| nqaReflectorTestBehavior This object indicates the action performed on the non-test frames by the reflector.
0: default value for 2544 reflector.
1: sharemode for 2544 reflector.
2: exclusive mode for Y.… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.16 |
| nqaReflectorDiscardPriority This object is used to configure the priority of Ethernet packets for reflector in the Ethernet service scenario.
The default is 4294967295. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.17 |
| nqaReflectorDirection Specifies the reflect direction.
1 indicates inbound. Reflect packets in manner of simulate product forwarding.
2 indicates outbound. Reflect packets in manner of output. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.18 |
| nqaReflectorEndTime This object indicates the end time of the reflector, in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.19 |
| nqaReflectorIfIndex This object indicates the index of the reflector interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.2 |
| nqaReflectorExchangePort This object indicates whether exchange port.
0: disable
1: enable | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.11.1.1.20 |
| nqaReflectorTestFlowId This object indicates the ID of test flow. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.11.1.1.21 |
| nqaReflectorMacAddress This object indicates the MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.111.11.1.1.3 |
| nqaReflectorIPAddress This object indicates the IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.11.1.1.5 |
| nqaReflectorRowStatus This object indicates the status of a row, which can be created or deleted but not modified.
The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.111.11.1.1.50 |
| nqaReflectorSimulationIPAddressType This object indicates the type of an simulated IP address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.11.1.1.6 |
| nqaReflectorSimulationIPAddress This object indicates the simulated IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.11.1.1.7 |
| nqaReflectorPevid This object indicates the PE VLAN ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.8 |
| nqaReflectorCevid This object indicates the CE VLAN ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.11.1.1.9 |