nqaReflectorDirection

NQA-MIB · .1.3.6.1.4.1.2011.5.25.111.11.1.1.18
MIB view Table view

Object

column r/w Unsigned32 
Specifies the reflect direction.
1 indicates inbound. Reflect packets in manner of simulate product forwarding.
2 indicates outbound. Reflect packets in manner of output.

Context

MIB
NQA-MIB
OID
.1.3.6.1.4.1.2011.5.25.111.11.1.1.18
Type
column
Access
readwrite
Status
current
Parent
nqaReflectorEntry
Table
nqaReflectorTable
Siblings
21

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 1-2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nqaReflectorID
This object indicates the reflector ID, which is also the index of this table.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.1
nqaReflectorAgeTime
This object indicates the aging time, in seconds. Setting the value to 0 indicates reserving the reflector eternally.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.10
nqaReflectorSourcePort
This object indicates the UDP source port number. 0 means invalid UDP source port, it cannot be set but could be walked
columnInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.11
nqaReflectorDestinationPort
This object indicates the UDP destination port number. 0 means invalid UDP source port, it cannot be set but could be walked
columnInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.12
nqaReflectorState
This object indicates the status of the reflector. 1: active 2: not in service
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.11.1.1.13
nqaReflectorSurvivalTime
This object indicates the survival time of the reflector, in seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.14
nqaReflectorRecommendedTestMacAddress
This object indicates the recommended test MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.5.25.111.11.1.1.15
nqaReflectorTestBehavior
This object indicates the action performed on the non-test frames by the reflector. 0: default value for 2544 reflector. 1: sharemode for 2544 reflector. 2: exclusive mode for Y.…
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.11.1.1.16
nqaReflectorDiscardPriority
This object is used to configure the priority of Ethernet packets for reflector in the Ethernet service scenario. The default is 4294967295.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.11.1.1.17
nqaReflectorEndTime
This object indicates the end time of the reflector, in seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.19
nqaReflectorIfIndex
This object indicates the index of the reflector interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.2
nqaReflectorExchangePort
This object indicates whether exchange port. 0: disable 1: enable
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.11.1.1.20
nqaReflectorTestFlowId
This object indicates the ID of test flow.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.11.1.1.21
nqaReflectorMacAddress
This object indicates the MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.5.25.111.11.1.1.3
nqaReflectorIPAddressType
This object indicates the type of an IP address.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.11.1.1.4
nqaReflectorIPAddress
This object indicates the IP address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.11.1.1.5
nqaReflectorRowStatus
This object indicates the status of a row, which can be created or deleted but not modified. The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.111.11.1.1.50
nqaReflectorSimulationIPAddressType
This object indicates the type of an simulated IP address.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.11.1.1.6
nqaReflectorSimulationIPAddress
This object indicates the simulated IP address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.11.1.1.7
nqaReflectorPevid
This object indicates the PE VLAN ID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.8
nqaReflectorCevid
This object indicates the CE VLAN ID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.11.1.1.9