nqaMultiPathResultsCurProbeCount

NQA-MIB · .1.3.6.1.4.1.2011.5.25.111.4.16.1.7
MIB view Table view

Object

column probes SNMPv2-SMIGauge32 
The total count of probe packets of Traceroute 
or LSP Traceroute test in a hop count index.

Context

MIB
NQA-MIB
OID
.1.3.6.1.4.1.2011.5.25.111.4.16.1.7
Type
column
Access
readonly
Status
current
Units
probes
Parent
nqaMultiPathResultsEntry
Table
nqaMultiPathResultsTable
Siblings
34

Syntax

probes SNMPv2-SMIGauge32
Source
SNMPv2-SMIGauge32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nqaMultiPathResultsIndex
The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Trace…
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.16.1.1
nqaMultiPathResultsSumCompletionTime2Low
The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined wh…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.10
nqaMultiPathResultsSumCompletionTime2High
The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumComple…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.11
nqaMultiPathResultsCompletionTimeMin
The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.12
nqaMultiPathResultsCompletionTimeMax
The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.13
nqaMultiPathResultsDisconnects
The times of consecutive failures. For connectionless protocol type of test, this number should be zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.14
nqaMultiPathResultsTimeouts
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.15
nqaMultiPathResultsBusies
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.16
nqaMultiPathResultsNoConnections
The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.17
nqaMultiPathResultsSequenceErrors
The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero. Wh…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.18
nqaMultiPathResultsDrops
The times probes of the test dropped due to sending or connecting failure.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.19
nqaMultiPathResultsPathIndex
The path index.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.16.1.2
nqaMultiPathResultsAddressType
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.4.16.1.20
nqaMultiPathResultsAddress
The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests).
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.4.16.1.21
nqaMultiPathResultsProbeResponses
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.
columnresponses SNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.22
nqaMultiPathResultsSentProbes
The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent.
columnprobes SNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.23
nqaMultiPathResultsLastGoodProbe
Date and time when the last response was received for a probe.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.5.25.111.4.16.1.24
nqaMultiPathResultsLastGoodPath
The date and time when the last complete path was determined.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2011.5.25.111.4.16.1.25
nqaMultiPathResultsTestFinished
The status of test execution.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.16.1.26
nqaMultiPathResultsRttAvg
The average of RTTs that were successfully measured by tests.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.27
nqaMultiPathResultsLostPacketRatio
The ratio of the packets lost to all packets sent in the test.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.28
nqaMultiPathResultsSrPolicyPreference
The preference of the segment list.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.29
nqaMultiPathResultsHopIndex
The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.4.16.1.3
nqaMultiPathResultsSrPolicyPathType
The path type of the segment list.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.16.1.30
nqaMultiPathResultsSrPolicyProtocol
The protocol of the segment list.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.16.1.31
nqaMultiPathResultsSrPolicyNodeAddress
The destination address of the segment list.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.4.16.1.32
nqaMultiPathResultsSrPolicyDiscriminator
The discriminator of the segment list.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.33
nqaMultiPathResultsSrPolicySegListId
The id of the segment list.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.34
nqaMultiPathResultsSrPolicyXcIndex
The xc index of the segment list.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.35
nqaMultiPathResultsCompletions
The status of test.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.4.16.1.4
nqaMultiPathResultsTestAttempts
The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test att…
columntests SNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.5
nqaMultiPathResultsCurHopCount
It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.
columnhops SNMPv2-SMIGauge32.1.3.6.1.4.1.2011.5.25.111.4.16.1.6
nqaMultiPathResultsRTDOverThresholds
The times of successful statistics test RTD (Round Trip Delay) over the threshold.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.8
nqaMultiPathResultsSumCompletionTime
The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp p…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2011.5.25.111.4.16.1.9