nqaMultiPathResultsCompletionTimeMin
NQA-MIB ·
.1.3.6.1.4.1.2011.5.25.111.4.16.1.12
Object
column
SNMPv2-SMIGauge32
The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test.
Context
- MIB
- NQA-MIB
- OID
.1.3.6.1.4.1.2011.5.25.111.4.16.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nqaMultiPathResultsEntry
- Table
- nqaMultiPathResultsTable
- Siblings
- 34
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nqaMultiPathResultsIndex The result table index and times of dispatching dependency tests.
Each test can only reserve 5 records. The result table only contains
icmp/dns/dlsw/lspPing/Traceroute/LSP Trace… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.1 |
| nqaMultiPathResultsSumCompletionTime2Low The low order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.
Low/High order is defined wh… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.10 |
| nqaMultiPathResultsSumCompletionTime2High The high order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.
See the nqaResultsSumComple… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.11 |
| nqaMultiPathResultsCompletionTimeMax The maximum RTT (for Traceroute and LSP Traceroute,
it is the maximum RTT among all the packets of next hop) of all packets in executing a test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.13 |
| nqaMultiPathResultsDisconnects The times of consecutive failures. For connectionless protocol type of test, this number should be zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.14 |
| nqaMultiPathResultsTimeouts The number of occasions when a NQA operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.15 |
| nqaMultiPathResultsBusies The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.16 |
| nqaMultiPathResultsNoConnections The number of occasions when a NQA operation could not be
initiated because the connection to the target has not
been established. For all other nqaAdminCtrlType this
object will… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.17 |
| nqaMultiPathResultsSequenceErrors The number of NQA operation completions received with
an unexpected sequence identifier. For all other values
of nqaAdminCtrlType this object will remain zero.
Wh… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.18 |
| nqaMultiPathResultsDrops The times probes of the test dropped due to sending or connecting failure. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.19 |
| nqaMultiPathResultsPathIndex The path index. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.2 |
| nqaMultiPathResultsAddressType The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16). | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.4.16.1.20 |
| nqaMultiPathResultsAddress The destination address (TraceRoute is the destination address of each hop,
and ping is the destination address of tests). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.4.16.1.21 |
| nqaMultiPathResultsProbeResponses Number of responses received for the corresponding
test. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | responses SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.22 |
| nqaMultiPathResultsSentProbes The value of this object reflects the number of probes sent
for the corresponding test.
The value of this object MUST be reported as 0 when no probes
have been sent. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.23 |
| nqaMultiPathResultsLastGoodProbe Date and time when the last response was received for a probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.111.4.16.1.24 |
| nqaMultiPathResultsLastGoodPath The date and time when the last complete path was determined. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.111.4.16.1.25 |
| nqaMultiPathResultsTestFinished The status of test execution. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.16.1.26 |
| nqaMultiPathResultsRttAvg The average of RTTs that were successfully measured by tests. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.27 |
| nqaMultiPathResultsLostPacketRatio The ratio of the packets lost to all packets sent in the test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.28 |
| nqaMultiPathResultsSrPolicyPreference The preference of the segment list. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.29 |
| nqaMultiPathResultsHopIndex The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.3 |
| nqaMultiPathResultsSrPolicyPathType The path type of the segment list. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.16.1.30 |
| nqaMultiPathResultsSrPolicyProtocol The protocol of the segment list. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.16.1.31 |
| nqaMultiPathResultsSrPolicyNodeAddress The destination address of the segment list. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.4.16.1.32 |
| nqaMultiPathResultsSrPolicyDiscriminator The discriminator of the segment list. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.33 |
| nqaMultiPathResultsSrPolicySegListId The id of the segment list. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.34 |
| nqaMultiPathResultsSrPolicyXcIndex The xc index of the segment list. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.35 |
| nqaMultiPathResultsCompletions The status of test. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.4.16.1.4 |
| nqaMultiPathResultsTestAttempts The times of executing tests, which includes the times of successful execution,
failed execution and interruption (interrupted by human or system).
The current number of test att… | column | tests SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.5 |
| nqaMultiPathResultsCurHopCount It is equal to the hop count index executed
by current Traceroute or LSP Traceroute tests.
Ping/LSP Ping does not use this entry. The default value is 0. | column | hops SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.6 |
| nqaMultiPathResultsCurProbeCount The total count of probe packets of Traceroute
or LSP Traceroute test in a hop count index. | column | probes SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.7 |
| nqaMultiPathResultsRTDOverThresholds The times of successful statistics test RTD (Round Trip Delay)
over the threshold. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.8 |
| nqaMultiPathResultsSumCompletionTime The sum of RTT (response time) of all packets of each hop for executing Traceroute,
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
lsp p… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.111.4.16.1.9 |