nqaMtracertHistoryQueryArrivalTime
NQA-MIB ·
.1.3.6.1.4.1.2011.5.25.111.5.3.1.9
Object
column
SNMPv2-SMIUnsigned32
The Query Arrival Time is a 32-bit NTP timestamp specifying the arrival time of the traceroute request packet at this router.
Context
- MIB
- NQA-MIB
- OID
.1.3.6.1.4.1.2011.5.25.111.5.3.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nqaMtracertHistoryEntry
- Table
- nqaMtracertHistoryTable
- Siblings
- 18
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nqaMtracertHistoryIndex The Mtracert history table index and times for dispatching dependency tests. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.1 |
| nqaMtracertHistoryIncomingIfAddress This field specifies the address of the interface on which packets from
this source and group are expected to arrive, or 0 if unknown. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.10 |
| nqaMtracertHistoryOutgoingIfAddress This field specifies the address of the interface on which packets from this source
and group flow to the specified destination, or 0 if unknown. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.11 |
| nqaMtracertHistoryPreHopRouterAddress This field specifies the router from
which this router expects packets from this source. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.12 |
| nqaMtracertHistoryInputPacketCount This field contains the number of multicast packets received for
all groups and sources on the incoming interface, or 0xffffffff if
no count can be reported. This counter shoul… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.13 |
| nqaMtracertHistoryOutputPacketCount This field contains the number of multicast packets that have
been transmitted or queued for transmission for all groups and
sources on the outgoing interface, or 0xffffffff if … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.14 |
| nqaMtracertHistoryTotalSGPacketCount This field counts the number of packets from the specified source
forwarded by this router to the specified group, or 0xffffffff if
no count can be reported. This counter should… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.15 |
| nqaMtracertHistoryRtgProtocol This field describes the routing protocol in use between this
router and the previous-hop router. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.16 |
| nqaMtracertHistoryFwdTTL This field contains the TTL that a packet is required to
have before it will be forwarded over the outgoing interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.17 |
| nqaMtracertHistoryFwdCode This field contains a forwarding information/error code.
noError(1): No error
wrongIf(2): Traceroute request arrived on an interface to
which this router would not for… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.18 |
| nqaMtracertHistroyFinishState The finish state of a probe. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.19 |
| nqaMtracertHistoryHopIndex The index of Mtracert hop. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.2 |
| nqaMtracertHistoryAddressType The address type of history records. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.5.3.1.3 |
| nqaMtracertHistoryAddress The destination address of tests. For Traceroute, it is the destination address of each hop. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.4 |
| nqaMtracertHistoryTimeStamp The start time stamp of a probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.111.5.3.1.5 |
| nqaMtracertHistoryCompletionTime The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it i… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.6 |
| nqaMtracertHistoryLastRC The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.7 |
| nqaMtracertHistoryCurQueryMode The current query mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.8 |