nqaMtracertHistoryFwdCode
NQA-MIB ·
.1.3.6.1.4.1.2011.5.25.111.5.3.1.18
Object
column
Enumeration
This field contains a forwarding information/error code. noError(1): No error wrongIf(2): Traceroute request arrived on an interface to which this router would not forward for this source,group,destination. pruneSent(3): This router has sent a prune upstream which applies to the source and group in the tracer- oute request. pruneRCVD(4): This router has stopped forwarding for this source and group in response to a request from the next hop router. scoped(5): The group is subject to administrative scoping at this hop. noRoute(6): This router has no route for the source or group and no way to determine a potential route. wrongLastHop(7): This router is not the proper last-hop router. notForwarding(8):This router is not forwarding this source,group out the outgoing interface for an unspecified reason. reachedRP(9): Reached Rendez-vous Point or Core rpfIf(10): Traceroute request arrived on the expected RPF interface for this source,group. noMulticast(11): Traceroute request arrived on an interface which is not enabled for multicast. infoHidden(12): One or more hops have been hidden from this trace. noSpace(13): There was not enough room to insert another response data block in the packet. oldRouter(14): The previous hop router does not understand traceroute requests. adminProhib(15): Traceroute is administratively prohibited.
Context
- MIB
- NQA-MIB
- OID
.1.3.6.1.4.1.2011.5.25.111.5.3.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nqaMtracertHistoryEntry
- Table
- nqaMtracertHistoryTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noError |
2 | wrongIf |
3 | pruneSent |
4 | pruneRCVD |
5 | scoped |
6 | noRoute |
7 | wrongLastHop |
8 | notForwarding |
9 | reachedRP |
11 | noMulticast |
12 | infoHidden |
130 | noSpace |
131 | oldRouter |
132 | adminProhib |
255 | unknownError |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nqaMtracertHistoryIndex The Mtracert history table index and times for dispatching dependency tests. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.1 |
| nqaMtracertHistoryIncomingIfAddress This field specifies the address of the interface on which packets from
this source and group are expected to arrive, or 0 if unknown. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.10 |
| nqaMtracertHistoryOutgoingIfAddress This field specifies the address of the interface on which packets from this source
and group flow to the specified destination, or 0 if unknown. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.11 |
| nqaMtracertHistoryPreHopRouterAddress This field specifies the router from
which this router expects packets from this source. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.12 |
| nqaMtracertHistoryInputPacketCount This field contains the number of multicast packets received for
all groups and sources on the incoming interface, or 0xffffffff if
no count can be reported. This counter shoul… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.13 |
| nqaMtracertHistoryOutputPacketCount This field contains the number of multicast packets that have
been transmitted or queued for transmission for all groups and
sources on the outgoing interface, or 0xffffffff if … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.14 |
| nqaMtracertHistoryTotalSGPacketCount This field counts the number of packets from the specified source
forwarded by this router to the specified group, or 0xffffffff if
no count can be reported. This counter should… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.15 |
| nqaMtracertHistoryRtgProtocol This field describes the routing protocol in use between this
router and the previous-hop router. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.16 |
| nqaMtracertHistoryFwdTTL This field contains the TTL that a packet is required to
have before it will be forwarded over the outgoing interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.17 |
| nqaMtracertHistroyFinishState The finish state of a probe. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.19 |
| nqaMtracertHistoryHopIndex The index of Mtracert hop. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.2 |
| nqaMtracertHistoryAddressType The address type of history records. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.5.3.1.3 |
| nqaMtracertHistoryAddress The destination address of tests. For Traceroute, it is the destination address of each hop. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.5.3.1.4 |
| nqaMtracertHistoryTimeStamp The start time stamp of a probe. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.25.111.5.3.1.5 |
| nqaMtracertHistoryCompletionTime The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it i… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.6 |
| nqaMtracertHistoryLastRC The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.7 |
| nqaMtracertHistoryCurQueryMode The current query mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.5.3.1.8 |
| nqaMtracertHistoryQueryArrivalTime The Query Arrival Time is a 32-bit NTP timestamp specifying
the arrival time of the traceroute request packet at this router. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.5.3.1.9 |