nqaAdminParaMeasure
NQA-MIB ·
.1.3.6.1.4.1.2011.5.25.111.2.2.1.93
Object
column
r/w
Enumeration
This object is used to configure the test mode for generalflow test.
Context
- MIB
- NQA-MIB
- OID
.1.3.6.1.4.1.2011.5.25.111.2.2.1.93- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nqaAdminParaEntry
- Table
- nqaAdminParaTable
- Siblings
- 125
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | delay |
2 | loss |
3 | throughput |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nqaAdminParaTargetAddressType Represents the address type of destination. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.1 |
| nqaAdminParaMaxFailures The value of this object indicates the maximum number of
consecutive timeouts allowed before terminating a remote
traceroute request. A value of 255 (maximum hop
count/possible… | column | timeouts Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.10 |
| nqaAdminParaSnmpCommunityRead Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.100 |
| nqaAdminParaDatasizeList The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.101 |
| nqaAdminParaFailRatioPrecision Indicates the precision of the threshold for the packet loss ratio.
0 indicates in 10e-4.
1 indicates in 10e-9. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.102 |
| nqaAdminParaFailRatioValue Indicates the threshold for the packet loss ratio.The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.103 |
| nqaAdminGeneralflowTestBehavior This object indicates the action performed on the non-test frames by the initiator.
0: Non-test frames will be discarded, and test frames will be forwarded.
1: Both non-test fram… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.104 |
| nqaAdminParaFrameRate This object indicates an Ethernet frame rate.
1: utilized line rate (L1 rate).
2: information rate (L2 rate). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.105 |
| nqaAdminGeneralflowDiscardNonTestPriority This object is used to configure the discarding priority of Ethernet packets for generalflow test in the Ethernet service scenario.
The value can range from 0 to 7 if this node wa… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.106 |
| nqaAdminParaSourceMacAddress Mac address of the source point. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.107 |
| nqaAdminParaCeEthType Specifies the type of Ethernet encapsulation.Default is 0x8100. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.108 |
| nqaAdminParaPeEthType Specifies the type of Ethernet encapsulation for QinQ outer vlan. Default is 0x8100. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.109 |
| nqaAdminParaDontFragment This object enables setting of Don't Fragment (DF) flag in
the IP header for a probe. Use of this object enables
performing a manual PATH MTU test. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.111.2.2.1.11 |
| nqaAdminParaDirection Specifies the test direction.
1 indicates inbound. Send packets in manner of simulate product forwarding.
2 indicates outbound. Send packets in manner of output. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.110 |
| nqaAdminParaLspVpnFrrPathType To indicate ping which ipv4-vpn lsp. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.111 |
| nqaAdminParaSoftwareBased Indicates that the software-based test is enabled only when the test case type is rtptest.
(The value range: enable:1;disable:2.The default value is disable(2)) | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.111.2.2.1.112 |
| nqaAdminParaLspPathType To indicate ping vpls pw via which lsp. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.113 |
| nqaAdminParaPathType To indicate ping request packet via which path. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.114 |
| nqaAdminParaFragment This object enables setting of Fragment (F) flag in
the IP header for a probe. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.111.2.2.1.115 |
| nqaAdminParaEthPriorityStatus Used for enabling or disabling the priority of Ethernet functionality when the test case type is Generalflow.
Options:
1. enabled(1) -indicates the priority of Ethernet function… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.111.2.2.1.116 |
| nqaAdminParaRmoteFecType Specifies the remote FEC type. The object applies to lspping and
lsptrace type test instance. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.117 |
| nqaAdminParaRmoteFecMask Specifies the address mask of remote FEC. The object applies to lspping and
lsptrace type test instance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.118 |
| nqaAdminParaRmoteFecIpAddress The IPV4 address of remote FEC. The object applies to lspping and
lsptrace type test instance. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.119 |
| nqaAdminParaDataSize The size of data field in packet. | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.12 |
| nqaAdminParaSrPolicyName The Policy name of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.120 |
| nqaAdminParaSrPolicyEndPointAddrType Represents the address type of destination. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.121 |
| nqaAdminParaSrPolicyEndPointIpAddress The destination of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.122 |
| nqaAdminParaSrPolicyEndPointColor The color of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.123 |
| nqaAdminParaSrPolicyBindingSid The binding sid of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.124 |
| nqaAdminParaDscp Indicates that the DS field is defined as the DSCP in the IP packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.111.2.2.1.125 |
| nqaAdminParaFlexAlgoId The flexible algorithm ID. The object applies to lspping and lsptrace type test instance. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.126 |
| nqaAdminParaDataFill Represents the characters used for filling the data field.
This object is used together with the corresponding object,
nqaAdminParaDataSize. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.13 |
| nqaAdminParaIfIndex Specified the source interface or tunnel, from which probes
of the test instance are sent. The value zero implies that the
object is disabled. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.111.2.2.1.14 |
| nqaAdminParaByPassRouteTable The purpose of this object is to optionally enable bypassing
the route table. If enabled, the remote host will bypass the
normal routing tables and send directly to a host on an… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.111.2.2.1.15 |
| nqaAdminParaMiscOptions Enables an application to specify implementation dependent options. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.16 |
| nqaAdminParaProbeCount Specifies the number of packets sent by the test instance, or times
of probe repeated, in which may send several packets. In the first case,
the range is 1 to 65… | column | probes Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.17 |
| nqaAdminParaTrapGeneration Switch of notification. Determine whether and how to send notifications
for the test instance:
- probeFailure(0) - Generate a PathChange notification when the current
path… | column | Bits | .1.3.6.1.4.1.2011.5.25.111.2.2.1.18 |
| nqaAdminParaTrapProbeFailureFilter Specifies the condition when to trigger an nqaProbeFailed notification.
When the number of consecutive failed probes violates the threshold indicated
by nqaAdminParaTrapProbeFai… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.19 |
| nqaAdminParaTargetAddress Represents the address of destination. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.2 |
| nqaAdminParaTrapTestFailureFilter Specifies the condition when to trigger an nqaTestFailed notification. When
the number of failed tests violates the threshold indicated by
nqaAdminParaTrapTestFailureFilter, a n… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.20 |
| nqaAdminParaDSField Specifies the Differentiated Services (DS) field in the IP packet. The DS
field is defined as the Type Of Service (TOS) octet in IPv4 header or as
the Traffic Class octet in IPv… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.21 |
| nqaAdminParaDnsServerAddressType Specifies the address type of DNS server. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.22 |
| nqaAdminParaDnsServerAddress Specifies the address of DNS server. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.23 |
| nqaAdminParaOperation Specifies the operation of FTP or HTTP type test instance. The
operations of FTP-type test instance include get and put. The
operations of HTTP-type test instance include get an… | column | NqaOperation | .1.3.6.1.4.1.2011.5.25.111.2.2.1.24 |
| nqaAdminParaHttpVersion Specifies the version of HTTP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.25 |
| nqaAdminParaHttpOperationString A string that specifies the HTTP operation which will be sent
to the HTTP server. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.26 |
| nqaAdminParaTestFailurePercent Specifies the scale over which the test will be regarded as failed. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.27 |
| nqaAdminParaFtpUserName Specifies the user name of the FTP server. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.28 |
| nqaAdminParaFtpPassword Specifies the password of the user of the FTP server. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.29 |
| nqaAdminParaTargetPort Represents the port number of destination. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.25.111.2.2.1.3 |
| nqaAdminParaFtpFilePath Specifies the full name of the file which will be transmitted
by the FTP-type test instance. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.30 |
| nqaAdminParaFtpFileSize Specifies the size that the file will be transmitted by the
FTP-type test instance. It may be part of the file. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.31 |
| nqaAdminParaInterval Specifies the interval between two consecutive probe packets.
If the test type is JITTER, ICMP JITTER or GENERALFLOW,
the interval is restored to the default value when the value… | column | millseconds Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.32 |
| nqaAdminParaNumPackets Specifies the number of packet sent in each probe. This object
is used together with nqaAdminParaProbeCount, and only applies to
jitter-type test instance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.33 |
| nqaAdminParaVrfName Specifies the VRF name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.34 |
| nqaAdminParaLspAddressType Specifies the address type of LSP. The object applies to lspping,
lsptrace and lspjitter type test instance. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.35 |
| nqaAdminParaLspAddressMask Specifies the address mask of LSP. The object applies to lspping,
lsptrace and lspjitter type test instance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.36 |
| nqaAdminParaLspIpAddress IP Address filled in the ip header, must be a 127/8 address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.37 |
| nqaAdminParaLspPWE3VcId The local Pseudo wire ID in PWE3 Ping test | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.38 |
| nqaAdminParaLspPWE3Type The encapsulation type of Pseudo wire ID in the PWE3 Ping test | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.39 |
| nqaAdminParaSourceAddressType Represents the address type of source. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.4 |
| nqaAdminParaLspPWE3Option The label type of PWE3 Ping and PWE3 Tracert test. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.40 |
| nqaAdminParaLspPWE3RemoteVcId The remote Pseudo wire ID in PWE Ping test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.41 |
| nqaAdminParaLspPWE3RemoteAddress The remote IP address in PWE3 Ping test. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.42 |
| nqaAdminParaLspExp The 3bit EXP field of the MPLS echo packet label. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.43 |
| nqaAdminParaLspReplyMode ReplyMode
Value Meaning
***** *******
1 Do not reply
2 Reply via an IPv4/IPv6 UDP packet
3 Reply via an IPv4/IPv6 UDP packet with Router Alert
4 Reply via applic… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.44 |
| nqaAdminParaResultRowMax Specifies the maximum number of result records. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.45 |
| nqaAdminParaHistoryRowMax Specifies the maximum number of history records. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.46 |
| nqaAdminParaCreateHopsEntries When set to enable (1), the result of each hop
will be kept in nqaResultsTable. The object applies
to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance. | column | EnableValue | .1.3.6.1.4.1.2011.5.25.111.2.2.1.47 |
| nqaAdminParaLspVCType The type of protocol which establishes PW in the pwe3tracert test | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.48 |
| nqaAdminParaMTraceLastHopAddress The last hop router's IP address in Mtrace test. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.49 |
| nqaAdminParaSourceAddress Represents the address of source. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.5 |
| nqaAdminParaMTraceSourceAddress The IP address of the multicast source for the path being
traced in Mtrace test. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.50 |
| nqaAdminParaMTraceGroupAddress The group address to be traced in Mtrace test, or zero if no
group-specific information is desired. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.51 |
| nqaAdminParaMTraceMaxTtl The maximum number of hops that the requester wants to
trace in Mtrace test. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.52 |
| nqaAdminParaMTraceSendMode The sending mode of the Query pamessage in Mtrace test. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.53 |
| nqaAdminParaMTraceResponseTtl The TTL at which to multicast the response in Mtrace test,
if the response address is a multicast address. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.54 |
| nqaAdminParaMTraceResponseAddressType Mtrace response address type | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.55 |
| nqaAdminParaMTraceResponseAddress This field specifies where the completed traceroute response
packet gets sent in Mtrace test. It can be a unicast address or
a multicast address | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.56 |
| nqaAdminParaDistanceNodeType The destination of MAC ping(mac address or rmepid). | column | NqaDistanceNodeType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.57 |
| nqaAdminParaMacAddress Mac address of the destination of MAC PING. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.58 |
| nqaAdminParaRMepID Rmepid of the destination of MAC PING. | column | IEEE802171-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.2011.5.25.111.2.2.1.59 |
| nqaAdminParaSourcePort Represents the port number of source. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2011.5.25.111.2.2.1.6 |
| nqaAdminParaMDName Indicate the MD name in which the MAC Ping operated. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.60 |
| nqaAdminParaMAName Indicate the MA name in which the MAC Ping operated. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.61 |
| nqaAdminParaMacTunnelName Indicate the MAC Tunnel name in which the MAC Ping operated. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.62 |
| nqaAdminParaPathMtuStep Specify the step of the path MTU test. If the last response
was received successful,the next packet's length will add
the step. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.63 |
| nqaAdminParaPathMtuDiscoveryPathMtuMax Specify the max value of the discovery field in the path MTU test. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.64 |
| nqaAdminParaIcmpJitterMode Select the type of ICMP packets to be sent in ICMP jitter and path
jitter test. The value can be icmpTimestamp(1) or icmpEcho(2). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.65 |
| nqaAdminParaCodecType To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.66 |
| nqaAdminParaIcpifAdvFactor The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.67 |
| nqaAdminParaFtpMode To indicate the mode to be used with ftp probe. This is
applicable only for the ftp probe. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.68 |
| nqaAdminParaHardwareBased Indicates that the hardware is enabled to send packets.
(The value range: enable:1;disable:2.The default value is disable(2)) | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.111.2.2.1.69 |
| nqaAdminParaMaxTtl Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe. | column | time-to-live value Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.7 |
| nqaAdminParaPppoeUserName Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute,
tcp,udp,ftp,dns,http probes, this parameter indicates that the probe
uses PPPoE encapsulation.
This parameter… | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.70 |
| nqaAdminParaPppoePassword Specifies the password of PPPoE dial-up. This is
applicable only for the PPPoE probe.
This parameter accepts the characters in sight only. | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.71 |
| nqaAdminParaPppoeVlanIf Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp,
udp, ftp, dns, http probes, this parameter indicates that the probe uses
PPPoE encapsulation. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.72 |
| nqaAdminParaPppoeAuthenticationMode Specifies the authentication mode of PPPoE dial-up. This is
applicable only for the PPPoE probe. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.73 |
| nqaAdminParaPppoeRedialUpTimes Specifies the redialup times of PPPoE dial-up. This is
applicable only for the PPPoE probe. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.74 |
| nqaAdminParaPppoeInterval Specifies the redialup interval of PPPoE dial-up. This is
applicable only for the PPPoE probe. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.75 |
| nqaAdminParaVsiName Specify the name of the VSI(Virtual Switch Instance) | column | OctetString | .1.3.6.1.4.1.2011.5.25.111.2.2.1.76 |
| nqaAdminParaVlanId Specify the Vlan ID | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.2011.5.25.111.2.2.1.77 |
| nqaAdminParaLspTunnelType To indicate ping/trace which lsp tunnel. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.78 |
| nqaAdminParaLspNextHopAddress Represents the address of nexthop. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.79 |
| nqaAdminParaInitialTtl Specifies the initial value of TTL. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.8 |
| nqaAdminParaLspVersion Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.80 |
| nqaAdminParaRemoteAddressType Represents the address type of remote. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.81 |
| nqaAdminParaRemoteAddress Represents the address of remote. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.82 |
| nqaAdminParaTimeUnit The unit of the timestamp, ms or us. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.111.2.2.1.83 |
| nqaAdminParaProbeRate The rate of sending message, bps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.84 |
| nqaAdminParaLifeTime The life time of test-case, s. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.85 |
| nqaAdminParaProtocolType The protocol type of test-case. When the test type is rtptest or rtpsnoop, the default value is udp(1), when the test type is not rtptest or rtpsnoop, the default value is unknown… | column | ProtocolType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.86 |
| nqaAdminParaSampleFrequency The frequency of rtpsnoop test, khz. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.87 |
| nqaAdminParaPacketSize The packet size of message, byte. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.88 |
| nqaAdminParaPacketInterval The interval of sending message, ms. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.89 |
| nqaAdminParaStorageType The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access
to any columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.9 |
| nqaAdminParaNextHopAddressType Specifies the address type of nexthop. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.111.2.2.1.90 |
| nqaAdminParaNextHopAddress Specifies the address of nexthop. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.111.2.2.1.91 |
| nqaAdminParaForwardingSimulationInboundIfIndex Specifies the inbound interface to simulate product forwarding. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.111.2.2.1.92 |
| nqaAdminParaEthPriority This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.94 |
| nqaAdminParaMinRate This object is used to configure the minimum transmitting rate, in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.95 |
| nqaAdminParaMaxRate This object is used to configure the maximum transmitting rate, in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.96 |
| nqaAdminParaCevid This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.97 |
| nqaAdminParaPevid This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.98 |
| nqaAdminParaPrecision This object is used to configure the throughput precision. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.111.2.2.1.99 |