nqaAdminParaFtpFileSize

NQA-MIB · .1.3.6.1.4.1.2011.5.25.111.2.2.1.31
MIB view Table view

Object

column r/w Integer32 
Specifies the size that the file will be transmitted by the 
FTP-type test instance. It may be part of the file.

Context

MIB
NQA-MIB
OID
.1.3.6.1.4.1.2011.5.25.111.2.2.1.31
Type
column
Access
readwrite
Status
current
Parent
nqaAdminParaEntry
Table
nqaAdminParaTable
Siblings
125

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-10000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
nqaAdminParaTargetAddressType
Represents the address type of destination.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.1
nqaAdminParaMaxFailures
The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of 255 (maximum hop count/possible…
columntimeouts Unsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.10
nqaAdminParaSnmpCommunityRead
Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.100
nqaAdminParaDatasizeList
The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.101
nqaAdminParaFailRatioPrecision
Indicates the precision of the threshold for the packet loss ratio. 0 indicates in 10e-4. 1 indicates in 10e-9.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.102
nqaAdminParaFailRatioValue
Indicates the threshold for the packet loss ratio.The default value is 0.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.103
nqaAdminGeneralflowTestBehavior
This object indicates the action performed on the non-test frames by the initiator. 0: Non-test frames will be discarded, and test frames will be forwarded. 1: Both non-test fram…
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.104
nqaAdminParaFrameRate
This object indicates an Ethernet frame rate. 1: utilized line rate (L1 rate). 2: information rate (L2 rate).
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.105
nqaAdminGeneralflowDiscardNonTestPriority
This object is used to configure the discarding priority of Ethernet packets for generalflow test in the Ethernet service scenario. The value can range from 0 to 7 if this node wa…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.106
nqaAdminParaSourceMacAddress
Mac address of the source point.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.107
nqaAdminParaCeEthType
Specifies the type of Ethernet encapsulation.Default is 0x8100.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2011.5.25.111.2.2.1.108
nqaAdminParaPeEthType
Specifies the type of Ethernet encapsulation for QinQ outer vlan. Default is 0x8100.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2011.5.25.111.2.2.1.109
nqaAdminParaDontFragment
This object enables setting of Don't Fragment (DF) flag in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.111.2.2.1.11
nqaAdminParaDirection
Specifies the test direction. 1 indicates inbound. Send packets in manner of simulate product forwarding. 2 indicates outbound. Send packets in manner of output.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.110
nqaAdminParaLspVpnFrrPathType
To indicate ping which ipv4-vpn lsp.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.111
nqaAdminParaSoftwareBased
Indicates that the software-based test is enabled only when the test case type is rtptest. (The value range: enable:1;disable:2.The default value is disable(2))
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.111.2.2.1.112
nqaAdminParaLspPathType
To indicate ping vpls pw via which lsp.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.113
nqaAdminParaPathType
To indicate ping request packet via which path.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.114
nqaAdminParaFragment
This object enables setting of Fragment (F) flag in the IP header for a probe.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.111.2.2.1.115
nqaAdminParaEthPriorityStatus
Used for enabling or disabling the priority of Ethernet functionality when the test case type is Generalflow. Options: 1. enabled(1) -indicates the priority of Ethernet function…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.111.2.2.1.116
nqaAdminParaRmoteFecType
Specifies the remote FEC type. The object applies to lspping and lsptrace type test instance.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.117
nqaAdminParaRmoteFecMask
Specifies the address mask of remote FEC. The object applies to lspping and lsptrace type test instance.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.118
nqaAdminParaRmoteFecIpAddress
The IPV4 address of remote FEC. The object applies to lspping and lsptrace type test instance.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.119
nqaAdminParaDataSize
The size of data field in packet.
columnoctets SNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.12
nqaAdminParaSrPolicyName
The Policy name of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.120
nqaAdminParaSrPolicyEndPointAddrType
Represents the address type of destination.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.121
nqaAdminParaSrPolicyEndPointIpAddress
The destination of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.122
nqaAdminParaSrPolicyEndPointColor
The color of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.123
nqaAdminParaSrPolicyBindingSid
The binding sid of of the SR-MPLS TE policy. The object applies to lspping and lsptrace type test instance.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.124
nqaAdminParaDscp
Indicates that the DS field is defined as the DSCP in the IP packet.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.111.2.2.1.125
nqaAdminParaFlexAlgoId
The flexible algorithm ID. The object applies to lspping and lsptrace type test instance.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.126
nqaAdminParaDataFill
Represents the characters used for filling the data field. This object is used together with the corresponding object, nqaAdminParaDataSize.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.13
nqaAdminParaIfIndex
Specified the source interface or tunnel, from which probes of the test instance are sent. The value zero implies that the object is disabled.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.111.2.2.1.14
nqaAdminParaByPassRouteTable
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.111.2.2.1.15
nqaAdminParaMiscOptions
Enables an application to specify implementation dependent options.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2011.5.25.111.2.2.1.16
nqaAdminParaProbeCount
Specifies the number of packets sent by the test instance, or times of probe repeated, in which may send several packets. In the first case, the range is 1 to 65…
columnprobes Unsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.17
nqaAdminParaTrapGeneration
Switch of notification. Determine whether and how to send notifications for the test instance: - probeFailure(0) - Generate a PathChange notification when the current path…
columnBits.1.3.6.1.4.1.2011.5.25.111.2.2.1.18
nqaAdminParaTrapProbeFailureFilter
Specifies the condition when to trigger an nqaProbeFailed notification. When the number of consecutive failed probes violates the threshold indicated by nqaAdminParaTrapProbeFai…
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.19
nqaAdminParaTargetAddress
Represents the address of destination.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.2
nqaAdminParaTrapTestFailureFilter
Specifies the condition when to trigger an nqaTestFailed notification. When the number of failed tests violates the threshold indicated by nqaAdminParaTrapTestFailureFilter, a n…
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.20
nqaAdminParaDSField
Specifies the Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in IPv4 header or as the Traffic Class octet in IPv…
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.21
nqaAdminParaDnsServerAddressType
Specifies the address type of DNS server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.22
nqaAdminParaDnsServerAddress
Specifies the address of DNS server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.23
nqaAdminParaOperation
Specifies the operation of FTP or HTTP type test instance. The operations of FTP-type test instance include get and put. The operations of HTTP-type test instance include get an…
columnNqaOperation.1.3.6.1.4.1.2011.5.25.111.2.2.1.24
nqaAdminParaHttpVersion
Specifies the version of HTTP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.2.2.1.25
nqaAdminParaHttpOperationString
A string that specifies the HTTP operation which will be sent to the HTTP server.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.2.2.1.26
nqaAdminParaTestFailurePercent
Specifies the scale over which the test will be regarded as failed.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.27
nqaAdminParaFtpUserName
Specifies the user name of the FTP server.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.2.2.1.28
nqaAdminParaFtpPassword
Specifies the password of the user of the FTP server.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.2.2.1.29
nqaAdminParaTargetPort
Represents the port number of destination.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.2011.5.25.111.2.2.1.3
nqaAdminParaFtpFilePath
Specifies the full name of the file which will be transmitted by the FTP-type test instance.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.2.2.1.30
nqaAdminParaInterval
Specifies the interval between two consecutive probe packets. If the test type is JITTER, ICMP JITTER or GENERALFLOW, the interval is restored to the default value when the value…
columnmillseconds Integer32.1.3.6.1.4.1.2011.5.25.111.2.2.1.32
nqaAdminParaNumPackets
Specifies the number of packet sent in each probe. This object is used together with nqaAdminParaProbeCount, and only applies to jitter-type test instance.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.33
nqaAdminParaVrfName
Specifies the VRF name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2011.5.25.111.2.2.1.34
nqaAdminParaLspAddressType
Specifies the address type of LSP. The object applies to lspping, lsptrace and lspjitter type test instance.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.35
nqaAdminParaLspAddressMask
Specifies the address mask of LSP. The object applies to lspping, lsptrace and lspjitter type test instance.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.36
nqaAdminParaLspIpAddress
IP Address filled in the ip header, must be a 127/8 address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.37
nqaAdminParaLspPWE3VcId
The local Pseudo wire ID in PWE3 Ping test
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.38
nqaAdminParaLspPWE3Type
The encapsulation type of Pseudo wire ID in the PWE3 Ping test
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.39
nqaAdminParaSourceAddressType
Represents the address type of source.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.4
nqaAdminParaLspPWE3Option
The label type of PWE3 Ping and PWE3 Tracert test.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.40
nqaAdminParaLspPWE3RemoteVcId
The remote Pseudo wire ID in PWE Ping test.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.41
nqaAdminParaLspPWE3RemoteAddress
The remote IP address in PWE3 Ping test.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.42
nqaAdminParaLspExp
The 3bit EXP field of the MPLS echo packet label.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.43
nqaAdminParaLspReplyMode
ReplyMode Value Meaning ***** ******* 1 Do not reply 2 Reply via an IPv4/IPv6 UDP packet 3 Reply via an IPv4/IPv6 UDP packet with Router Alert 4 Reply via applic…
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.44
nqaAdminParaResultRowMax
Specifies the maximum number of result records.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.45
nqaAdminParaHistoryRowMax
Specifies the maximum number of history records.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.46
nqaAdminParaCreateHopsEntries
When set to enable (1), the result of each hop will be kept in nqaResultsTable. The object applies to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance.
columnEnableValue.1.3.6.1.4.1.2011.5.25.111.2.2.1.47
nqaAdminParaLspVCType
The type of protocol which establishes PW in the pwe3tracert test
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.48
nqaAdminParaMTraceLastHopAddress
The last hop router's IP address in Mtrace test.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.49
nqaAdminParaSourceAddress
Represents the address of source.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.5
nqaAdminParaMTraceSourceAddress
The IP address of the multicast source for the path being traced in Mtrace test.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.50
nqaAdminParaMTraceGroupAddress
The group address to be traced in Mtrace test, or zero if no group-specific information is desired.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.51
nqaAdminParaMTraceMaxTtl
The maximum number of hops that the requester wants to trace in Mtrace test.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.52
nqaAdminParaMTraceSendMode
The sending mode of the Query pamessage in Mtrace test.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.53
nqaAdminParaMTraceResponseTtl
The TTL at which to multicast the response in Mtrace test, if the response address is a multicast address.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.54
nqaAdminParaMTraceResponseAddressType
Mtrace response address type
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.55
nqaAdminParaMTraceResponseAddress
This field specifies where the completed traceroute response packet gets sent in Mtrace test. It can be a unicast address or a multicast address
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.56
nqaAdminParaDistanceNodeType
The destination of MAC ping(mac address or rmepid).
columnNqaDistanceNodeType.1.3.6.1.4.1.2011.5.25.111.2.2.1.57
nqaAdminParaMacAddress
Mac address of the destination of MAC PING.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.58
nqaAdminParaRMepID
Rmepid of the destination of MAC PING.
columnIEEE802171-CFM-MIBDot1agCfmMepIdOrZero.1.3.6.1.4.1.2011.5.25.111.2.2.1.59
nqaAdminParaSourcePort
Represents the port number of source.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.2011.5.25.111.2.2.1.6
nqaAdminParaMDName
Indicate the MD name in which the MAC Ping operated.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.60
nqaAdminParaMAName
Indicate the MA name in which the MAC Ping operated.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.61
nqaAdminParaMacTunnelName
Indicate the MAC Tunnel name in which the MAC Ping operated.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.62
nqaAdminParaPathMtuStep
Specify the step of the path MTU test. If the last response was received successful,the next packet's length will add the step.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.63
nqaAdminParaPathMtuDiscoveryPathMtuMax
Specify the max value of the discovery field in the path MTU test.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.64
nqaAdminParaIcmpJitterMode
Select the type of ICMP packets to be sent in ICMP jitter and path jitter test. The value can be icmpTimestamp(1) or icmpEcho(2).
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.65
nqaAdminParaCodecType
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.66
nqaAdminParaIcpifAdvFactor
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) …
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.67
nqaAdminParaFtpMode
To indicate the mode to be used with ftp probe. This is applicable only for the ftp probe.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.68
nqaAdminParaHardwareBased
Indicates that the hardware is enabled to send packets. (The value range: enable:1;disable:2.The default value is disable(2))
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.111.2.2.1.69
nqaAdminParaMaxTtl
Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe.
columntime-to-live value Unsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.7
nqaAdminParaPppoeUserName
Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that the probe uses PPPoE encapsulation. This parameter…
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.70
nqaAdminParaPppoePassword
Specifies the password of PPPoE dial-up. This is applicable only for the PPPoE probe. This parameter accepts the characters in sight only.
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.71
nqaAdminParaPppoeVlanIf
Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp, udp, ftp, dns, http probes, this parameter indicates that the probe uses PPPoE encapsulation.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.72
nqaAdminParaPppoeAuthenticationMode
Specifies the authentication mode of PPPoE dial-up. This is applicable only for the PPPoE probe.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.73
nqaAdminParaPppoeRedialUpTimes
Specifies the redialup times of PPPoE dial-up. This is applicable only for the PPPoE probe.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.74
nqaAdminParaPppoeInterval
Specifies the redialup interval of PPPoE dial-up. This is applicable only for the PPPoE probe.
columnInteger32.1.3.6.1.4.1.2011.5.25.111.2.2.1.75
nqaAdminParaVsiName
Specify the name of the VSI(Virtual Switch Instance)
columnOctetString.1.3.6.1.4.1.2011.5.25.111.2.2.1.76
nqaAdminParaVlanId
Specify the Vlan ID
columnQ-BRIDGE-MIBVlanIdOrNone.1.3.6.1.4.1.2011.5.25.111.2.2.1.77
nqaAdminParaLspTunnelType
To indicate ping/trace which lsp tunnel.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.78
nqaAdminParaLspNextHopAddress
Represents the address of nexthop.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.79
nqaAdminParaInitialTtl
Specifies the initial value of TTL.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.8
nqaAdminParaLspVersion
Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.80
nqaAdminParaRemoteAddressType
Represents the address type of remote.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.81
nqaAdminParaRemoteAddress
Represents the address of remote.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.82
nqaAdminParaTimeUnit
The unit of the timestamp, ms or us.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.83
nqaAdminParaProbeRate
The rate of sending message, bps.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.84
nqaAdminParaLifeTime
The life time of test-case, s.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.85
nqaAdminParaProtocolType
The protocol type of test-case. When the test type is rtptest or rtpsnoop, the default value is udp(1), when the test type is not rtptest or rtpsnoop, the default value is unknown…
columnProtocolType.1.3.6.1.4.1.2011.5.25.111.2.2.1.86
nqaAdminParaSampleFrequency
The frequency of rtpsnoop test, khz.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.87
nqaAdminParaPacketSize
The packet size of message, byte.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.88
nqaAdminParaPacketInterval
The interval of sending message, ms.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.89
nqaAdminParaStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2011.5.25.111.2.2.1.9
nqaAdminParaNextHopAddressType
Specifies the address type of nexthop.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.111.2.2.1.90
nqaAdminParaNextHopAddress
Specifies the address of nexthop.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.111.2.2.1.91
nqaAdminParaForwardingSimulationInboundIfIndex
Specifies the inbound interface to simulate product forwarding.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.111.2.2.1.92
nqaAdminParaMeasure
This object is used to configure the test mode for generalflow test.
columnEnumeration.1.3.6.1.4.1.2011.5.25.111.2.2.1.93
nqaAdminParaEthPriority
This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.94
nqaAdminParaMinRate
This object is used to configure the minimum transmitting rate, in Kbps.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.95
nqaAdminParaMaxRate
This object is used to configure the maximum transmitting rate, in Kbps.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.96
nqaAdminParaCevid
This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.97
nqaAdminParaPevid
This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.98
nqaAdminParaPrecision
This object is used to configure the throughput precision.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.111.2.2.1.99