ethSecondaryState
NORTEL-OME40G-FAC-MIB ·
.1.3.6.1.4.1.562.68.11.3.1.3.1.1.15
Object
column
RFC1213-MIBDisplayString
Secondary state for the facility. A facility can have more than one secondary state as different combinations of the individual secondary state. It is represented as a string to capture all the combinations. Those combinations along with the Primary state are used to compute the admin state.Can be any combination of flt, sgeo, lpbk, discd, ts, wrkrx, wrktx.
Context
- MIB
- NORTEL-OME40G-FAC-MIB
- OID
.1.3.6.1.4.1.562.68.11.3.1.3.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nnEthEntry
- Table
- nnEthTable
- Siblings
- 16
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethRowStatus Create, delete, put in service, out of service, and edit | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.1 |
| flowControl | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.10 |
| equipment | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.11 |
| ethMapping Sets the non-client OTM2 OTU rate and client mapping | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.12 |
| ethLoopbackType Facility if loopback is active; otherwise nothing is
returned for this attribute. | column | LoopbackType | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.13 |
| ethPrimaryState Primary State of the faciltiy. Can only be modified
by changing the admin state. | column | PrimaryState | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.14 |
| ethAdminState This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to O… | column | AdminState | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.16 |
| ethAID Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.17 |
| ethLaserOffFarEndFail To turn off Tx laser under certain failure scenarios | column | Status | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.2 |
| oChTxActEthPwr The target will be of the format xx.x and dBm will be
assumed for powers within design/accuracy range.
Powers outside the accuracy/design range will be clamped
at: OOR-HI or OOR-… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.3 |
| oChTxMinEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.4 |
| oChTxMaxEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.5 |
| oChRxActEthPwr The target will be of the format xx.x and dBm will be
assumed for powers within design/accuracy range.
Powers outside the accuracy/design range will be clamped
at: OOR-HI or OOR-… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.6 |
| oChRxMinEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.7 |
| oChRxMaxEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.8 |
| maxTransUnit Maximum transmission unit | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.9 |