ethMapping
NORTEL-OME40G-FAC-MIB ·
.1.3.6.1.4.1.562.68.11.3.1.3.1.1.12
Object
column
r/w
Enumeration
Sets the non-client OTM2 OTU rate and client mapping
Context
- MIB
- NORTEL-OME40G-FAC-MIB
- OID
.1.3.6.1.4.1.562.68.11.3.1.3.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nnEthEntry
- Table
- nnEthTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | prop237 |
2 | prop238 |
3 | gfp-mactr |
4 | gfp-std |
5 | gfp-mactr192 |
6 | gfp-std192 |
7 | gfp-mactr64 |
8 | gfp-std64 |
9 | gfp-macostr |
10 | gfp-macostr192 |
11 | gfp-macostr64 |
12 | ull |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethRowStatus Create, delete, put in service, out of service, and edit | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.1 |
| flowControl | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.10 |
| equipment | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.11 |
| ethLoopbackType Facility if loopback is active; otherwise nothing is
returned for this attribute. | column | LoopbackType | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.13 |
| ethPrimaryState Primary State of the faciltiy. Can only be modified
by changing the admin state. | column | PrimaryState | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.14 |
| ethSecondaryState Secondary state for the facility. A facility can have
more than one secondary state as different combinations
of the individual secondary state. It is represented
as a string to … | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.15 |
| ethAdminState This is a write-only variable. The user can restore
or remove facilities using this command. You restore
a facility by setting this variable to IS and remove
it by setting it to O… | column | AdminState | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.16 |
| ethAID Facility AID as received from TL1. This should include
the FAC type, shelf id, slot, and port. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.17 |
| ethLaserOffFarEndFail To turn off Tx laser under certain failure scenarios | column | Status | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.2 |
| oChTxActEthPwr The target will be of the format xx.x and dBm will be
assumed for powers within design/accuracy range.
Powers outside the accuracy/design range will be clamped
at: OOR-HI or OOR-… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.3 |
| oChTxMinEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.4 |
| oChTxMaxEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.5 |
| oChRxActEthPwr The target will be of the format xx.x and dBm will be
assumed for powers within design/accuracy range.
Powers outside the accuracy/design range will be clamped
at: OOR-HI or OOR-… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.6 |
| oChRxMinEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.7 |
| oChRxMaxEthPwr The target will be of the format xx.x and dBm will
be assumed | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.8 |
| maxTransUnit Maximum transmission unit | column | Enumeration | .1.3.6.1.4.1.562.68.11.3.1.3.1.1.9 |