solarCfgPVLVolMPPT

NEXT-UPS-MIB · .0.1.2.14.7
MIB view Table view

Object

scalar r/w 0.1 V Integer32 
Set the PV input low voltage for MPPT

Context

MIB
NEXT-UPS-MIB
OID
.0.1.2.14.7
Type
scalar
Access
readwrite
Status
current
Units
0.1 V
Parent
solarConfig
Siblings
33

Syntax

0.1 V Integer32

Values & Constraints

Object Constraints
range: 1100-2000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
solarCfgGridOutVolHLoss
grid output voltage high loss point
scalar0.1 Volts Integer32.0.1.2.14.1
solarCfgGridInVolHLoss
Set grid input voltage high loss point
scalar0.1 V Integer32.0.1.2.14.11
solarCfgGridInVolLLoss
Set grid input voltage low loss point
scalar0.1 V Integer32.0.1.2.14.12
solarCfgGridInFreqHLoss
grid input frequency high loss point
scalar0.1Hz Integer32.0.1.2.14.13
solarCfgGridInFreqLLoss
grid input frequency low loss point
scalar0.1Hz Integer32.0.1.2.14.14
solarCfgAverageVolHLoss
the grid long time average voltage high loss point
scalar0.1V Integer32.0.1.2.14.15
solarCfgAverageVolLLoss
the grid long time average voltage low loss point
scalar0.1V Integer32.0.1.2.14.16
solarCfgSetDefaultValue
Setting control parsameter to default valuse
scalarEnumeration.0.1.2.14.17
solarCfgWaiteTimeFeed
Setting waiting time for feeding
scalarsecond Integer32.0.1.2.14.18
solarCfgSilenceBuzzer
Setting this object to Enable/disable silence buzzer or open buzzer
scalarEnumeration.0.1.2.14.19
solarCfgGridOutVolLLoss
grid output voltage low loss point
scalar0.1 Volts Integer32.0.1.2.14.2
solarCfgBuzzerInStandby
Setting this object to Enable/disable buzzer audible in standby mode
scalarEnumeration.0.1.2.14.20
solarCfgAutoRestart
Enable/disable auto-Restart. (for hybrid)
scalarEnumeration.0.1.2.14.21
solarCfgBatMAudibleWarn
Enable/disable battery mode audible warning (for hybrid)
scalarEnumeration.0.1.2.14.22
solarCfgBatOpenCheck
Enable/disable battery open status check (for hybrid)
scalarEnumeration.0.1.2.14.23
solarCfgSiteFaultDetect
Enable/disable Site fault detect (for hybrid)
scalarEnumeration.0.1.2.14.24
solarCfgHotStandbyMS
Hot standby master/slave PEM means master, PDM means slave (for hybrid)
scalarEnumeration.0.1.2.14.25
solarCfgBatDpDischgProt
Enable/disable battery deep discharge protect (for hybrid)
scalarEnumeration.0.1.2.14.26
solarCfgBatLowDischgProt
Enable/disable battery low protect (if disable, the battery will discharge to 6V) (for hybrid)
scalarEnumeration.0.1.2.14.27
solarCfgCodeStart
Enable/disable code start (for hybrid)
scalarEnumeration.0.1.2.14.28
solarCfgBypassForbid
Enable/disable bypass forbidding (for hybrid)
scalarEnumeration.0.1.2.14.29
solarCfgGridOutFreqHLoss
grid output frequency high loss point
scalar0.1 Hertz Integer32.0.1.2.14.3
solarCfgBypassWhenOff
Enable/disable bypass when device turn off. (for hybrid)
scalarEnumeration.0.1.2.14.30
solarCfgShortRestart3
Enable/disable short restart 3 times (for hybrid)
scalarEnumeration.0.1.2.14.31
solarCfgShortClear
Enable/disable inverter short clear function (for hybrid)
scalarEnumeration.0.1.2.14.32
solarCfgMaxChargeVol
Max floating charging voltage (for hybrid)
scalar0.1V Integer32.0.1.2.14.33
solarCfgMaxChargeCurr
Max floating charging current (for hybrid)
scalar0.1A Integer32.0.1.2.14.34
solarCfgChargingEnable
Enable/disable charging on grid mode (for hybrid)
scalarEnumeration.0.1.2.14.35
solarCfgGridOutFreqLLoss
grid output frequency low loss point
scalar0.1 Hertz Integer32.0.1.2.14.4
solarCfgCurrentMaxOutPower
the max output power. ener solar:0-030000
scalar0.1 W Integer32.0.1.2.14.5
solarCfgPVHVolMPPT
the PV input high voltage for MPPT
scalar0.1 V Integer32.0.1.2.14.6
solarCfgUpLimitPVVol
Set the upper limit of PV input voltage
scalar0.1 V Integer32.0.1.2.14.8
solarCfgLowLimitPVVol
Set the lowest limit of PV input voltage
scalar0.1 V Integer32.0.1.2.14.9