ntcTsAnlyAlmSyncByte

NEWTEC-TSANALYSER-MIB · .1.3.6.1.4.1.5835.5.2.1400.1.6.2
MIB view Table view

Object

scalar NEWTEC-TC-MIBNtcAlarmState 
This alarm is raised when a single corrupted SYNC byte is detected and cleared
when the next correct one appears. This variable indicates the current status
of the alarm.

Context

MIB
NEWTEC-TSANALYSER-MIB
OID
.1.3.6.1.4.1.5835.5.2.1400.1.6.2
Type
scalar
Access
readonly
Status
current
Parent
ntcTsAnlyAlarm
Siblings
7

Syntax

NEWTEC-TC-MIBNtcAlarmState
Source
NEWTEC-TC-MIBNtcAlarmState
Base type
Enumeration

Values & Constraints

Type Values
0off
1on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ntcTsAnlyAlmSyncLoss
Alarm indicating that the synchronization with the Transport-Stream (TS) has been lost. This conditions occurs when 2 or more consecutive corrupted SYNC bytes are received. This v…
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.1
ntcTsAnlyAlmPat
This alarm indicates that the 'Program Association Table' (PAT) can not be detected properly in the stream. The PAT table id (0x00) should be detected in a PID 0x0000 at least eve…
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.3
ntcTsAnlyAlmContinuityCount
This alarm is raised when packets arrive out of sequence, get dropped or occur more than once. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.4
ntcTsAnlyAlmTransport
This alarm condition is detected when the 'Transport Error indicator'-bit in the TS-Header is set to '1' for a specific PID. The alarm condition is cleared when no Transport Error…
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.5
ntcTsAnlyAlmPcrRepetition
This alarm is raised if the spacing between two consecutive PCR values is more than 40ms. The condition can occur when PCR packets get lost or when PCR packets are not present at …
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.6
ntcTsAnlyAlmPcrDiscontinuity
This alarm indicates that the difference between two consecutive PCR values exceeds the range [0-100] ms, while the 'discontinuity indicator' bit is not set. This bit in the Adapt…
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.7
ntcTsAnlyAlmPcrAccuracy
This alarm condition occurs when the PCR accuracy exceeds +/- 500nsec. The definition of the alarm is taken from TR101290. This variable indicates the current status of the alarm.
scalarNEWTEC-TC-MIBNtcAlarmState.1.3.6.1.4.1.5835.5.2.1400.1.6.8