ntcEtherAlarm
NEWTEC-ETHERNET-MIB ·
.1.3.6.1.4.1.5835.5.2.500.1.6
Object
node
Container holding ntcEtherAlarm definitions.
Context
- MIB
- NEWTEC-ETHERNET-MIB
- OID
.1.3.6.1.4.1.5835.5.2.500.1.6- Type
- node
- Status
- current
- Parent
- ntcEtherObjects
- Siblings
- 6
- Children
- 20
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcEtherLinkMgmtTable A table containing the ntcEtherLinkMgmt | table | - | .1.3.6.1.4.1.5835.5.2.500.1.1 |
| ntcEtherLinkDataTable A table containing the ntcEtherLinkData | table | - | .1.3.6.1.4.1.5835.5.2.500.1.2 |
| ntcEtherStatMgmtTable A table containing the ntcEtherStatMgmt | table | - | .1.3.6.1.4.1.5835.5.2.500.1.3 |
| ntcEtherStatDataTable A table containing the ntcEtherStatData | table | - | .1.3.6.1.4.1.5835.5.2.500.1.4 |
| ntcEtherInterfaceRedundancy Container holding ntcEtherInterfaceRedundancy definitions. | node | - | .1.3.6.1.4.1.5835.5.2.500.1.5 |
| ntcEtherDataIgmpVersion IGMP Version for the Data interfaces. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.500.1.7 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcEtherAlmMgmt1EthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.1 |
| ntcEtherAlmMgmtFpEthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.10 |
| ntcEtherAlmMgmtEthInterfaceFail This alarm is raised when a failure is detected on the Ethernet interface.
This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.11 |
| ntcEtherAlmDataEthInterfaceFail This alarm is raised when a failure is detected on the Ethernet interface.
This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.12 |
| ntcEtherAlmSat1EthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.13 |
| ntcEtherAlmSat1EthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.14 |
| ntcEtherAlmSat2EthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.15 |
| ntcEtherAlmSat2EthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.16 |
| ntcEtherAlmSatEthInterfaceFail This alarm is raised when a failure is detected on the Ethernet interface.
This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.17 |
| ntcEtherAlmMgmtEthGenIfFail This alarm is raised when a failure is detected on the Ethernet interface.
This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.18 |
| ntcEtherAlmDataEthGenIfFail This alarm is raised when a failure is detected on the Ethernet interface.
This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.19 |
| ntcEtherAlmMgmt1EthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.2 |
| ntcEtherAlmSatEthGenIfFail This alarm is raised when a failure is detected on the Ethernet interface.
This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.20 |
| ntcEtherAlmMgmt2EthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.3 |
| ntcEtherAlmMgmt2EthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.4 |
| ntcEtherAlmData1EthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.5 |
| ntcEtherAlmData1EthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.6 |
| ntcEtherAlmData2EthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.7 |
| ntcEtherAlmData2EthHalfDuplex This alarm is raised when an Ethernet interface is in half duplex mode as a
result of a link negotiation. The alarm is not raised when the Ethernet
interface was forced in half du… | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.8 |
| ntcEtherAlmMgmtFpEthLinkFail This alarm is raised when there is no signal on the corresponding Ethernet
interface. This variable indicates the current status of the alarm. | scalar | NEWTEC-TC-MIBNtcAlarmState | .1.3.6.1.4.1.5835.5.2.500.1.6.9 |