NEWTEC-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
34

ntcEtherLinkMgmtTable

table
.1.3.6.1.4.1.5835.5.2.500.1.1 · 1 row entry · 8 columns
Open in standard view 
A table containing the ntcEtherLinkMgmt
ntcEtherLinkMgmtEntry entry .1.3.6.1.4.1.5835.5.2.500.1.1.1
A conceptual row of the ntcEtherLinkMgmtTable.
Indexes
ntcEtherLinkMgmtInterface
Column Syntax OID
ntcEtherLinkMgmtInterface
The name of Management Ethernet interface
Enumeration
Enumerated Values:
0mgmt1
1mgmt2
2mgmtfp
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.1
ntcEtherLinkMgmtEnable
Enable or disable the corresponding Ethernet interface.
NEWTEC-TC-MIBNtcEnabler/w
Textual Convention: NEWTEC-TC-MIBNtcEnable Enumeration
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.2
ntcEtherLinkMgmtMacAddress
MAC address of an Ethernet interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.3
ntcEtherLinkMgmtAutoNegotiation
Enable or disable autonegotiation. AutoNegotiation is a procedure where two
connected devices choose the same Ethernet transmission parameters (Speed,
duplex/simplex mode and flow control).
NEWTEC-TC-MIBNtcEnabler/w
Textual Convention: NEWTEC-TC-MIBNtcEnable Enumeration
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.4
ntcEtherLinkMgmtAdvertisedSpeeds
Configure the advertised speeds during autonegotiation.
Enumerationr/w
Enumerated Values:
0all
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.5
ntcEtherLinkMgmtForcedSpeed
Configure forced speed with disabled autonegotation.
Enumerationr/w
Enumerated Values:
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.6
ntcEtherLinkMgmtLinkState
Indicates the link state of the Ethernet interface.
Enumeration
Enumerated Values:
0linkDown
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
6e10GSFPplus
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.7
ntcEtherLinkMgmtMtu
Configuration of the MTU of the interface.
Unsigned32r/w
Constraints:
range: 68-9216
 .1.3.6.1.4.1.5835.5.2.500.1.1.1.8

ntcEtherLinkDataTable

table
.1.3.6.1.4.1.5835.5.2.500.1.2 · 1 row entry · 8 columns
Open in standard view 
A table containing the ntcEtherLinkData
ntcEtherLinkDataEntry entry .1.3.6.1.4.1.5835.5.2.500.1.2.1
A conceptual row of the ntcEtherLinkDataTable.
Indexes
ntcEtherLinkDataInterface
Column Syntax OID
ntcEtherLinkDataInterface
The name of a Data Ethernet Interface
Enumeration
Enumerated Values:
0data1
1data2
2sat1
3sat2
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.1
ntcEtherLinkDataEnable
Enable or disable the corresponding Ethernet interface.
NEWTEC-TC-MIBNtcEnabler/w
Textual Convention: NEWTEC-TC-MIBNtcEnable Enumeration
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.2
ntcEtherLinkDataMacAddress
MAC address of an Ethernet interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.3
ntcEtherLinkDataAutoNegotiation
Enable or disable autonegotiation. AutoNegotiation is a procedure where two
connected devices choose the same Ethernet transmission parameters (Speed,
duplex/simplex mode and flow control).
NEWTEC-TC-MIBNtcEnabler/w
Textual Convention: NEWTEC-TC-MIBNtcEnable Enumeration
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.4
ntcEtherLinkDataAdvertisedSpeeds
Configure the advertised speeds during autonegotiation.
Enumerationr/w
Enumerated Values:
0all
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.5
ntcEtherLinkDataForcedSpeed
Configure forced speed with disabled autonegotation.
Enumerationr/w
Enumerated Values:
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.6
ntcEtherLinkDataLinkState
Indicates the link state of the Ethernet interface.
Enumeration
Enumerated Values:
0linkDown
1e10BTHalfDuplex
2e10BTFullDuplex
3e100BTHalfDuplex
4e100BTFullDuplex
5e1000BTFullDuplex
6e10GSFPplus
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.7
ntcEtherLinkDataMtu
Configuration of the MTU of the interface.
Unsigned32r/w
Constraints:
range: 68-9216
 .1.3.6.1.4.1.5835.5.2.500.1.2.1.8

ntcEtherStatMgmtTable

table
.1.3.6.1.4.1.5835.5.2.500.1.3 · 1 row entry · 9 columns
Open in standard view 
A table containing the ntcEtherStatMgmt
ntcEtherStatMgmtEntry entry .1.3.6.1.4.1.5835.5.2.500.1.3.1
A conceptual row of the ntcEtherStatMgmtTable.
Indexes
ntcEtherStatMgmtInterface
Column Syntax OID
ntcEtherStatMgmtInterface
The name of a Management Ethernet Interface
Enumeration
Enumerated Values:
0mgmt1
1mgmt2
2mgmtfp
3mgmtbond
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.1
ntcEtherStatMgmtInputBytes
Ethernet input byte counter.
bytesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.2
ntcEtherStatMgmtInputPackets
Ethernet input packet counter.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.3
ntcEtherStatMgmtInputDropped
Indicates the number of dropped packets at input.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.4
ntcEtherStatMgmtOutputBytes
Indicates the number of available bytes on the output.
bytesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.5
ntcEtherStatMgmtOutputPackets
Ethernet output packet counter
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.6
ntcEtherStatMgmtOutputDropped
Ethernet output packets dropped counter
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.7
ntcEtherStatMgmtInputErrors
Indicates the number of error packets at input.
packetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.8
ntcEtherStatMgmtOutputerrors
Indicates the number of error packets at output.
packetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.3.1.9

ntcEtherStatDataTable

table
.1.3.6.1.4.1.5835.5.2.500.1.4 · 1 row entry · 9 columns
Open in standard view 
A table containing the ntcEtherStatData
ntcEtherStatDataEntry entry .1.3.6.1.4.1.5835.5.2.500.1.4.1
A conceptual row of the ntcEtherStatDataTable.
Indexes
ntcEtherStatDataInterface
Column Syntax OID
ntcEtherStatDataInterface
The name of a Data Ethernet interface
Enumeration
Enumerated Values:
0data1
1data2
2databond
3sat1
4sat2
5satbond
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.1
ntcEtherStatDataInputBytes
Ethernet input byte counter.
bytesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.2
ntcEtherStatDataInputPackets
Ethernet input packet counter.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.3
ntcEtherStatDataInputDropped
Indicates the number of dropped packets at input.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.4
ntcEtherStatDataOutputBytes
Indicates the number of available bytes on the output.
bytesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.5
ntcEtherStatDataOutputPackets
Ethernet output packet counter
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.6
ntcEtherStatDataOutputDropped
Ethernet output packets dropped counter
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.7
ntcEtherStatDataInputErrors
Indicates the number of error packets at input.
packetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.8
ntcEtherStatDataOutputerrors
Indicates the number of error packets at output.
packetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5835.5.2.500.1.4.1.9