ntcDvbModDvbs2ModCod
NEWTEC-DVBMODULATOR-MIB ·
.1.3.6.1.4.1.5835.5.2.1000.1.16.3
Object
scalar
r/w
Enumeration
The selection of modulation type and the FEC rate.
Context
- MIB
- NEWTEC-DVBMODULATOR-MIB
- OID
.1.3.6.1.4.1.5835.5.2.1000.1.16.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ntcDvbModDvbs2
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | qpsk14 |
2 | qpsk13 |
3 | qpsk25 |
4 | qpsk12 |
5 | qpsk35 |
6 | qpsk23 |
7 | qpsk34 |
8 | qpsk45 |
9 | qpsk56 |
10 | qpsk89 |
11 | qpsk910 |
12 | e8psk35 |
13 | e8psk23 |
14 | e8psk34 |
15 | e8psk56 |
16 | e8psk89 |
17 | e8psk910 |
18 | e16apsk23 |
19 | e16apsk34 |
20 | e16apsk45 |
21 | e16apsk56 |
22 | e16apsk89 |
23 | e16apsk910 |
24 | e32apsk34 |
25 | e32apsk45 |
26 | e32apsk56 |
27 | e32apsk89 |
28 | e32apsk910 |
29 | qpsk1345 |
30 | qpsk920 |
31 | qpsk1120 |
32 | e8apsk59l |
33 | e8apsk2645l |
34 | e8psk2336 |
35 | e8psk2536 |
36 | e8psk1318 |
37 | e16apsk12l |
38 | e16apsk815l |
39 | e16apsk59l |
40 | e16apsk2645 |
41 | e16apsk35 |
42 | e16apsk35l |
43 | e16apsk2845 |
44 | e16apsk2336 |
45 | e16apsk23l |
46 | e16apsk2536 |
47 | e16apsk1318 |
48 | e16apsk79 |
49 | e16apsk7790 |
50 | e32apsk23l |
51 | e32apsk3245 |
52 | e32apsk1115 |
53 | e32apsk79 |
54 | e64apsk3245l |
55 | e64apsk1115 |
56 | e64apsk79 |
57 | e64apsk45 |
58 | e64apsk56 |
59 | e128apsk34 |
60 | e128apsk79 |
61 | e256apsk2945l |
62 | e256apsk23l |
63 | e256apsk3145l |
64 | e256apsk3245 |
65 | e256apsk1115l |
66 | e256apsk34 |
67 | qpsk1145 |
68 | qpsk415 |
69 | qpsk1445 |
70 | qpsk715 |
71 | qpsk815 |
72 | qpsk3245 |
73 | e8psk715 |
74 | e8psk815 |
75 | e8psk2645 |
76 | e8psk3245 |
77 | e16apsk715 |
78 | e16apsk815 |
79 | e16apsk3245 |
80 | e32apsk23 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcDvbModDvbs2Isi deprecated The DVB-S2 Input Stream Identifier (ISI) is present in the second byte
position of the MATYPE field in the baseband header of a DVB-S2 baseband
frame. It is a single byte identify… | scalar | Unsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.1 |
| ntcDvbModDvbs2PhyLayerEfficiency The measured physical layer efficiency, equal to the percentage of non-dummy
physical layer frames. Float represented as integer is scaled by a factor of
100. i.e. a value of 5000… | scalar | % Integer32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.10 |
| ntcDvbModDvbs2BbLayerEfficiency The measured baseband layer efficiency, equal to the percentage user data in
tbe baseband frames. Float represented as integer is scaled by a factor of
100. i.e. a value of 5000 i… | scalar | % Integer32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.11 |
| ntcDvbModDvbs2DumPlScramblMode The dummy physical layer scrambler mode can be set to continuous, to achieve
more randomness in the carrier data as required for bandwidth cancellation. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.12 |
| ntcDvbModDvbs2PlScrambSig The physical layer scrambler signature. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.13 |
| ntcDvbModDvbs2Reset deprecated Reset the modulator monitoring counters. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.14 |
| ntcDvbModDvbs2RollOffSignalling When a Roll-off <20% is configured, this setting is used to put the Roll-off
bits in the baseband header to reserved (11) or to a standardized value. Some
receivers accept only sp… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.15 |
| ntcDvbModDvbs2FrameType Dvb-S2 defines 2 FEC-frame types :
- normal: FECframes of 64800 bits or 8100 bytes
- short: FECframes of 16200 bits or 2025 bytes Short frames are used when
working with low symbo… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.2 |
| ntcDvbModDvbs2Pilots Dvb-S2 Physical Layer Pilot insertion. When enabled, every 16 slots (of 90
symbols) the modulator will insert 36 unmodulated symbols to aid in receiver
synchronization. Set Pilots… | scalar | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.1000.1.16.4 |
| ntcDvbModDvbs2RatePriority deprecated Select the rate mode (symbol rate or bit rate). The selected rate will be kept
constant when other parameters have impact a the modulator rate. Only the
selected rate can be chang… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.5 |
| ntcDvbModDvbs2SymbolRate deprecated Define the required symbol rate in baud. | scalar | baud SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.6 |
| ntcDvbModDvbs2BitRate deprecated Define the required bit rate of the modulator. Current devices support a range
of 50000 to 250000000 bps. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.7 |
| ntcDvbModDvbs2MeasuredPktCount deprecated Measured TS packet count of the modulator. | scalar | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.8 |
| ntcDvbModDvbs2MeasuredBitRate deprecated Measured bitrate of the modulator. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.9 |