ntcDvbModDvbs2DumPlScramblMode
NEWTEC-DVBMODULATOR-MIB ·
.1.3.6.1.4.1.5835.5.2.1000.1.16.12
Object
scalar
r/w
Enumeration
The dummy physical layer scrambler mode can be set to continuous, to achieve more randomness in the carrier data as required for bandwidth cancellation.
Context
- MIB
- NEWTEC-DVBMODULATOR-MIB
- OID
.1.3.6.1.4.1.5835.5.2.1000.1.16.12- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ntcDvbModDvbs2
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | dvbs2standard |
1 | continuous |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ntcDvbModDvbs2Isi deprecated The DVB-S2 Input Stream Identifier (ISI) is present in the second byte
position of the MATYPE field in the baseband header of a DVB-S2 baseband
frame. It is a single byte identify… | scalar | Unsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.1 |
| ntcDvbModDvbs2PhyLayerEfficiency The measured physical layer efficiency, equal to the percentage of non-dummy
physical layer frames. Float represented as integer is scaled by a factor of
100. i.e. a value of 5000… | scalar | % Integer32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.10 |
| ntcDvbModDvbs2BbLayerEfficiency The measured baseband layer efficiency, equal to the percentage user data in
tbe baseband frames. Float represented as integer is scaled by a factor of
100. i.e. a value of 5000 i… | scalar | % Integer32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.11 |
| ntcDvbModDvbs2PlScrambSig The physical layer scrambler signature. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.13 |
| ntcDvbModDvbs2Reset deprecated Reset the modulator monitoring counters. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.14 |
| ntcDvbModDvbs2RollOffSignalling When a Roll-off <20% is configured, this setting is used to put the Roll-off
bits in the baseband header to reserved (11) or to a standardized value. Some
receivers accept only sp… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.15 |
| ntcDvbModDvbs2FrameType Dvb-S2 defines 2 FEC-frame types :
- normal: FECframes of 64800 bits or 8100 bytes
- short: FECframes of 16200 bits or 2025 bytes Short frames are used when
working with low symbo… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.2 |
| ntcDvbModDvbs2ModCod The selection of modulation type and the FEC rate. | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.3 |
| ntcDvbModDvbs2Pilots Dvb-S2 Physical Layer Pilot insertion. When enabled, every 16 slots (of 90
symbols) the modulator will insert 36 unmodulated symbols to aid in receiver
synchronization. Set Pilots… | scalar | NEWTEC-TC-MIBNtcEnable | .1.3.6.1.4.1.5835.5.2.1000.1.16.4 |
| ntcDvbModDvbs2RatePriority deprecated Select the rate mode (symbol rate or bit rate). The selected rate will be kept
constant when other parameters have impact a the modulator rate. Only the
selected rate can be chang… | scalar | Enumeration | .1.3.6.1.4.1.5835.5.2.1000.1.16.5 |
| ntcDvbModDvbs2SymbolRate deprecated Define the required symbol rate in baud. | scalar | baud SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.6 |
| ntcDvbModDvbs2BitRate deprecated Define the required bit rate of the modulator. Current devices support a range
of 50000 to 250000000 bps. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.7 |
| ntcDvbModDvbs2MeasuredPktCount deprecated Measured TS packet count of the modulator. | scalar | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.8 |
| ntcDvbModDvbs2MeasuredBitRate deprecated Measured bitrate of the modulator. | scalar | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5835.5.2.1000.1.16.9 |