vasPulSnkRowStatus

NETI-VAS-MIB · .1.3.6.1.4.1.2928.2.5.4.6.1.2
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
See SNMPv2-TC.  Use vasPulSnkAdminStatus to activate and
de-activate a Pull sink.  The following values are supported:
              
active(1). The object always reads active.
              
createAndGo(4). A new conceptual row is created representing
a new Pull sink.  To activate the Pull sink, set the
administrative state to up(1) after all columnar objects have
been set.
              
destroy(6). The Pull sink is deleted.  It can be deleted
regardless of its operational state.

Context

MIB
NETI-VAS-MIB
OID
.1.3.6.1.4.1.2928.2.5.4.6.1.2
Type
column
Access
readwrite
Status
current
Parent
vasPulSnkEntry
Table
vasPulSnkTable
Siblings
25

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vasPulSnkIndex
An index that uniquely identifies the pull sink in the table.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.5.4.6.1.1
vasPulSnkResetStatistics
Resets all statistics counters for the object. (Not yet implemented).
columnVasResetStatistics.1.3.6.1.4.1.2928.2.5.4.6.1.10
vasPulSnkStatsTrsp
Index for an entry in statistics vasTrspStatisticsTable table for this object.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.5.4.6.1.11
vasPulSnkStatsTr101
Index for an entry in ETSI TR 101 290 statistics table for this object. (The table is not yet defined).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.5.4.6.1.12
vasPulSnkEnableTr101
Enables or disables ETSI TR 101 290 statistics collection.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2928.2.5.4.6.1.13
vasPulSnkRemoteInetType
Format of vasPulSrcRemoteInetAddress.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2928.2.5.4.6.1.14
vasPulSnkRemoteInetAddress
The IP address of the remote host from where the transport stream is received. The value is empty and vasPulSnkRemoteInetType is `unknown' when a stream is not received.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2928.2.5.4.6.1.15
vasPulSnkStreamId
Specifies the stream ID of the stream on the remote host that shall be received. The stream ID is a string that identifies the transport stream in all nodes where the stream exis…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.5.4.6.1.16
vasPulSnkPassword
The password to use for the received transport stream. The password must match the vasPulSrcPassword set on the source at the remote host.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.5.4.6.1.17
vasPulSnkRemoteHostType
Format of vasPulSnkRemoteHostAddress. Supported values are `unknown', `ipv4', and `dns'.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2928.2.5.4.6.1.18
vasPulSnkRemoteHostAddress
The IP address or DNS hostname of the remote host from where the transport stream shall be pulled. This address is the first host that will be attempted when a transport stream i…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2928.2.5.4.6.1.19
vasPulSnkRemoteHostType2
Format of vasPulSnkRemoteHostAddress2. Supported values are `unknown', `ipv4', and `dns'.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2928.2.5.4.6.1.20
vasPulSnkRemoteHostAddress2
The second IP address or DNS hostname of the remote host from where the transport stream shall be pulled. When using two addresses, then the transport is setup with two alternati…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2928.2.5.4.6.1.21
vasPulSnkRemotePort
The UDP port on the remote host that the remote host is listening for connection attempts. See vaStreamPort.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.2928.2.5.4.6.1.22
vasPulSnkRetransmitBuffer
The size of the retransmission buffer in milliseconds (ms). The retransmission buffer setting adds bandwidth on the sender side to compensate for packet loss. The setting will af…
columnUnsigned32.1.3.6.1.4.1.2928.2.5.4.6.1.23
vasPulSnkFecMaxOverhead
The Forward Error Correction (FEC) overhead in percent (%) of the original stream bit rate. FEC increases the streams tolerance of burst errors and corrects for single errors, as…
columnUnsigned32.1.3.6.1.4.1.2928.2.5.4.6.1.24
vasPulSnkFecOptimize
Whether to automatically optimize Forward Error Correction (FEC). Optimization will favor the video stream and visually important frames, I and IDR-frames, over others, such as a…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2928.2.5.4.6.1.25
vasPulSnkFecLatency
Forward Error Correction (FEC) block size in milliseconds (ms).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.5.4.6.1.26
vasPulSnkName
A textual name of the Pull sink. The name is automatically assigned by the system. The last part of the name is the index in this table.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.5.4.6.1.3
vasPulSnkPurpose
A text that can describe the purpose of the Pull sink. This is for administrative use.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.5.4.6.1.4
vasPulSnkAdminStatus
The administrative state of the Pull sink. The value controls the desired state of the Pull sink. up(1). The Pull sink shall be enabled. down(2). Th…
columnEnumeration.1.3.6.1.4.1.2928.2.5.4.6.1.5
vasPulSnkOperStatus
The operational state of the Pull sink. The value normally follow the state of the administrative state. up(1). The Pull sink is up and operational. …
columnEnumeration.1.3.6.1.4.1.2928.2.5.4.6.1.6
vasPulSnkFailure
A string describing the configuration or error status of the object. The string is the empty string if the configuration is correct and no error is present, otherwise it contains…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.5.4.6.1.7
vasPulSnkLastChanged
The value of sysUpTime when status or configuration of the objects was last changed.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.2928.2.5.4.6.1.8
vasPulSnkConnectionStatus
The status of the stream transport connection.
columnVasConnectionStatus.1.3.6.1.4.1.2928.2.5.4.6.1.9