ethDevCapMaxMaxQueueOctets

NETI-ETH-MIB · .1.3.6.1.4.1.2928.2.2.1.1.1.1.19
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
The maximum value in octets possible to set for the maximum
queue size for queues on the device.  See
ethIfQueueMaxOctets.

Context

MIB
NETI-ETH-MIB
OID
.1.3.6.1.4.1.2928.2.2.1.1.1.1.19
Type
column
Access
readonly
Status
current
Parent
ethDeviceEntry
Table
ethDeviceTable
Siblings
29

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ethDevIndex
An index in the table. The index is equal to the board position in the node. The index is maintained across reboots of the managed system.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.1
ethDevCapSpanningTree
The spanning tree capabilities of forwarding functions on the device. Describes all supported values of the spanning tree settings. If spanning tree is not supported, then the v…
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.10
ethDevCapVLANMode
The VLAN mode capabilities of forwarding functions on the device. Describes all supported values of the VLAN mode settings. See ethFwdVLANMode.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.11
ethDevCapAdvertisedDuplex
Supported values for the duplex setting of a physical interface on the device. See dot3AdvertisedDuplex.
columnAdvertisedDuplex.1.3.6.1.4.1.2928.2.2.1.1.1.1.12
ethDevCapAdvertisedFlowControl
Supported values for the flow control setting of a physical interface on the device. See dot3AdvertisedFlowControl.
columnAdvertisedFlowControl.1.3.6.1.4.1.2928.2.2.1.1.1.1.13
ethDevCapAcceptableFrameType
The frame types capabilities of interfaces on the device. Describes all supported values of the acceptable frame type setting. See ethIfAcceptableFrameTypes.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.14
ethDevCapDefaultEthernetPriority
The range of allowed values for Ethernet priority of interfaces on the device. See ethIfDefaultEthernetPriority. The object consists of two octets, where the first octet represe…
columnOctetString.1.3.6.1.4.1.2928.2.2.1.1.1.1.15
ethDevCapLearning
The learning capabilities of forwarding functions on the device. Describes all supported values of the learning setting. See ethIfLearning.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.16
ethDevCapTransmittedFrameTypeETS
The allowed values of the transmitted frame type on an Ethernet Transport Service Trail Termination Point, ETS TTP. See ethIfTransmittedFrameType. Note that the interface type ca…
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.17
ethDevCapTransmittedFrameTypeDot3
The allowed values of the transmitted frame type on an dot3 interface. See ethIfTransmittedFrameType. Note that the interface type can be determined by examine ethIfType.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.18
ethDevRowStatus
The following values are supported: active(1). The object always reads active. destroy(6). All configurations for the device are deleted. If the phys…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2928.2.2.1.1.1.1.2
ethDevCapMaxMaxQueueFrames deprecated
The maximum value in frames allowed to set for the maximum queue size for queues on the device. See ethIfQueueMaxFrames.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.20
ethDevCapMaxTrafficClass
The maximum number of traffic classes supported by the device. Traffic classes are identified by numbers starting from 0 to, but not including, this value.
columnTrafficClass.1.3.6.1.4.1.2928.2.2.1.1.1.1.21
ethDevEtsNextIndex
The value of the next available index (ethIfIndex) in the ethEtsTable for this device.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.22
ethDevFwdFuncNextIndex
The value of the next available index (ethFwdIndex) in the ethFwdFuncTable for this device.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.23
ethDevCapPerformanceMonitoring
Indicates how the device supports performance monitoring.
columnEnumeration.1.3.6.1.4.1.2928.2.2.1.1.1.1.24
ethDevCapConfigurableFaultMgmt
Indicates how the device supports configurable fault management.
columnEnumeration.1.3.6.1.4.1.2928.2.2.1.1.1.1.25
ethDevIfgFirstIndex
The value of the first allowed index (ethIfIndex) in the ethIfgTable for this device.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.26
ethDevIfgNextIndex
The value of the next available index (ethIfIndex) in the ethIfgTable for this device.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.27
ethDevCapDropPrecedenceLevels
The number of different drop precedence (DP) levels that this devices supports. The DP levels are numbered from 0 to (dropPrecedenceLevels - 1)
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.28
ethDevCapDropProbabilityFunctions
The drop probability functions supported for this device.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.29
ethDevName
The textual name of the device. The value of this object should be the name of the device as assigned by the local device and should be suitable for use in commands entered at th…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.2.1.1.1.1.3
ethDevFailure
A string describing the configuration or error status of the device. The string is the empty string if the configuration is correct, otherwise a message describing the error.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.2.1.1.1.1.30
ethDevContainerName
The name of the container where the physical device is mounted.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.2.1.1.1.1.4
ethDevProductName
The name of the product. The value of this object should be the name of the device as printed on the front panel or similar.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.2928.2.2.1.1.1.1.5
ethDevStatus
The status of the device, indicating if the board is plugged in or not. present(1). The device is present and functional. absent(2). The device is no…
columnEnumeration.1.3.6.1.4.1.2928.2.2.1.1.1.1.6
ethDevCapJumboFrames
The Jumbo Frames capabilities of forwarding functions on the device. Describes all supported values of the Jumbo Frames setting. See ethFwdJumboFrames.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.7
ethDevCapMaxAgingTime
The maximum aging time for dynamically learned forwarding information for forwarding functions on the device. Zero (0) if the device does not allow the value to be set. See ethF…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2928.2.2.1.1.1.1.8
ethDevCapMACMode
The MAC mode capabilities of forwarding functions on the device. Describes all supported values of the MAC modes setting. See ethFwdMACMode.
columnBits.1.3.6.1.4.1.2928.2.2.1.1.1.1.9