rlPhdUnitStackPortTable

NETGEAR-RADLAN-Physicaldescription-MIB · .1.3.6.1.4.1.4526.17.53.25

Object

table

The table listing information required for stack port.
The index for the table is ifindex; the ports that represented in that table are
operational stack ports or ports that can be stack ports after reset

Context

MIB: NETGEAR-RADLAN-Physicaldescription-MIB
OID: .1.3.6.1.4.1.4526.17.53.25
Type: table
Status: current
Parent: rlPhysicalDescription
Siblings: 24
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rlPhdMibVersion MIB's version, the current version is 3. 1: original version 2: a. new tables rlPhdModuleHotSwapTable rlPhdStackOrderTable b. new scalars rlPhdStackReor…	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.1`
rlPhdForceMasterUnit Force unit to be master.	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.10`
rlPhdStackFixedUnit Determine which unit will be on bottom/top of list on Show-List command(see .	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.11`
rlPhdStackFixedUnitLocation Determine the bottom/top object in the stack table.	scalar	Enumeration	`.1.3.6.1.4.1.4526.17.53.12`
rlPhdStackReloadUnit Reset a specific unit.	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.13`
rlPhdUnitGenParamTable For each module (board) there is an entry describing it in this module	table	-	`.1.3.6.1.4.1.4526.17.53.14`
rlPhdUnitEnvParamTable For each module (board) there is an entry describing it in this module	table	-	`.1.3.6.1.4.1.4526.17.53.15`
rlPhdStackOrderTopUnit This scalar mib holds the Top unit for the stack order command	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.16`
rlPhdStackOrderBottomUnit This scalar mib holds the Bottom unit for the stack order command	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.17`
rlPhdStackOrderPermutation This scalar mib holds stack permutation	scalar	OctetString	`.1.3.6.1.4.1.4526.17.53.18`
rlPhdNumberOfPoeUnits Shows the current number of poe units in the stack.	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.19`
rlPhdModuleTable For each module (board) there is an entry describing it in this module	table	-	`.1.3.6.1.4.1.4526.17.53.2`
rlPhdPoeTable For each module (board) there is an entry describing it in this module	table	-	`.1.3.6.1.4.1.4526.17.53.20`
rlPhdPhyLedStackUnit This scalar mib holds the unit number for the stack light command	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.21`
rlPhdPhyLedTimeout This scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to normal state.	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.22`
rlCascadeTable For each cascaded port for stacking unit there is an entry describing it in this table	table	-	`.1.3.6.1.4.1.4526.17.53.23`
rlCascadeAdminTable For each unit there is an entry describing its cascade ports and speed after reset	table	-	`.1.3.6.1.4.1.4526.17.53.24`
rlPhdPortsTable Lists the physical or physical-related attributes of ports	table	-	`.1.3.6.1.4.1.4526.17.53.3`
rlPhdStackTable For each stack unit there is an entry describing it in this table	table	-	`.1.3.6.1.4.1.4526.17.53.4`
rlPhdModuleHotSwapTable For each module (board) there is an entry describing its Hot Swap status	table	-	`.1.3.6.1.4.1.4526.17.53.5`
rlPhdStackOrderTable This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If …	table	-	`.1.3.6.1.4.1.4526.17.53.6`
rlPhdStackReorder Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further ch…	scalar	Enumeration	`.1.3.6.1.4.1.4526.17.53.7`
rlPhdNumberOfUnits Shows the current number of units in the stack.	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.8`
rlPhdMaxNumberOfUnits Shows the maximum number of units in the stack.	scalar	Integer32	`.1.3.6.1.4.1.4526.17.53.9`

Child Objects