rlPhdStackOrderTopUnit

NETGEAR-RADLAN-Physicaldescription-MIB · .1.3.6.1.4.1.4526.17.53.16
MIB view Table view

Object

scalar r/w Integer32 
This scalar mib holds the Top unit for the stack order command

Context

MIB
NETGEAR-RADLAN-Physicaldescription-MIB
OID
.1.3.6.1.4.1.4526.17.53.16
Type
scalar
Access
readwrite
Status
current
Parent
rlPhysicalDescription
Siblings
24

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlPhdMibVersion
MIB's version, the current version is 3. 1: original version 2: a. new tables rlPhdModuleHotSwapTable rlPhdStackOrderTable b. new scalars rlPhdStackReor…
scalarInteger32.1.3.6.1.4.1.4526.17.53.1
rlPhdForceMasterUnit
Force unit to be master.
scalarInteger32.1.3.6.1.4.1.4526.17.53.10
rlPhdStackFixedUnit
Determine which unit will be on bottom/top of list on Show-List command(see .
scalarInteger32.1.3.6.1.4.1.4526.17.53.11
rlPhdStackFixedUnitLocation
Determine the bottom/top object in the stack table.
scalarEnumeration.1.3.6.1.4.1.4526.17.53.12
rlPhdStackReloadUnit
Reset a specific unit.
scalarInteger32.1.3.6.1.4.1.4526.17.53.13
rlPhdUnitGenParamTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.14
rlPhdUnitEnvParamTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.15
rlPhdStackOrderBottomUnit
This scalar mib holds the Bottom unit for the stack order command
scalarInteger32.1.3.6.1.4.1.4526.17.53.17
rlPhdStackOrderPermutation
This scalar mib holds stack permutation
scalarOctetString.1.3.6.1.4.1.4526.17.53.18
rlPhdNumberOfPoeUnits
Shows the current number of poe units in the stack.
scalarInteger32.1.3.6.1.4.1.4526.17.53.19
rlPhdModuleTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.2
rlPhdPoeTable
For each module (board) there is an entry describing it in this module
table-.1.3.6.1.4.1.4526.17.53.20
rlPhdPhyLedStackUnit
This scalar mib holds the unit number for the stack light command
scalarInteger32.1.3.6.1.4.1.4526.17.53.21
rlPhdPhyLedTimeout
This scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to normal state.
scalarInteger32.1.3.6.1.4.1.4526.17.53.22
rlCascadeTable
For each cascaded port for stacking unit there is an entry describing it in this table
table-.1.3.6.1.4.1.4526.17.53.23
rlCascadeAdminTable
For each unit there is an entry describing its cascade ports and speed after reset
table-.1.3.6.1.4.1.4526.17.53.24
rlPhdUnitStackPortTable
The table listing information required for stack port. The index for the table is ifindex; the ports that represented in that table are operational stack ports or ports that can b…
table-.1.3.6.1.4.1.4526.17.53.25
rlPhdPortsTable
Lists the physical or physical-related attributes of ports
table-.1.3.6.1.4.1.4526.17.53.3
rlPhdStackTable
For each stack unit there is an entry describing it in this table
table-.1.3.6.1.4.1.4526.17.53.4
rlPhdModuleHotSwapTable
For each module (board) there is an entry describing its Hot Swap status
table-.1.3.6.1.4.1.4526.17.53.5
rlPhdStackOrderTable
This table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last configured order. If …
table-.1.3.6.1.4.1.4526.17.53.6
rlPhdStackReorder
Setting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object and until a further ch…
scalarEnumeration.1.3.6.1.4.1.4526.17.53.7
rlPhdNumberOfUnits
Shows the current number of units in the stack.
scalarInteger32.1.3.6.1.4.1.4526.17.53.8
rlPhdMaxNumberOfUnits
Shows the maximum number of units in the stack.
scalarInteger32.1.3.6.1.4.1.4526.17.53.9