nbsSigLaneLaneRxPowerLevel
NBS-SIGLANE-MIB ·
.1.3.6.1.4.1.629.236.20.1.1.30
Object
column
Enumeration
This object indicates the status of this lane's
measured received power, reported in nbsSigLaneLaneRxPower:
notSupported(1), if (nbsSigLaneLaneRxPower = 0x80000000);
lowAlarm(2),
if nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerVendorMin;
lowWarning(3),
if nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerVendorMin
and nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerUserMin;
ok(4), if nbsSigLaneLaneRxPower is within thresholds;
highWarning(5),
if nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerVendorMax
and nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerUserMax;
highAlarm(6),
if nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerVendorMax
Context
- MIB
- NBS-SIGLANE-MIB
- OID
.1.3.6.1.4.1.629.236.20.1.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nbsSigLaneLaneEntry
- Table
- nbsSigLaneLaneTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notSupported |
2 | lowAlarm |
3 | lowWarning |
4 | ok |
5 | highWarning |
6 | highAlarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsSigLaneLaneIfIndex The index to the MIB-II Interface table entry which contains this
(fiber/lambda) lane. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.236.20.1.1.1 |
| nbsSigLaneLaneFrequency The nominal frequency, in MHz. | column | NBS-MIBNbsTcMHz | .1.3.6.1.4.1.629.236.20.1.1.10 |
| nbsSigLaneLaneWavelengthX The nominal wavelength (nanometers) is an ASCII string
to be human-readable. CWDM wavelengths use 4 digits.
DWDM wavelengths use seven digits and a decimal point.
N… | column | OctetString | .1.3.6.1.4.1.629.236.20.1.1.11 |
| nbsSigLaneLaneChannelBand The ITU grid labels DWDM channels with a letter 'band' and a
numeric channel. Within this mib, the band is indicated by
this object, and the channel number is shown in the object… | column | NBS-CMMCENUM-MIBNbsCmmcChannelBand | .1.3.6.1.4.1.629.236.20.1.1.12 |
| nbsSigLaneLaneChannelNumber The channel number can be derived by extracting the two middle
digits from the six digit frequency in GHz. | column | Integer32 | .1.3.6.1.4.1.629.236.20.1.1.13 |
| nbsSigLaneLaneTxDisable This object controls the lane's transmitter:
notSupported(1), returned if transmitter not configurable, i.e. always
enabled;
no(2), to enable the t… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.14 |
| nbsSigLaneLaneFaultsCaps This object specifies the supported nbsSigLaneLaneFaultsOper bit(s).
A zero length OCTET STRING indicates this information is not provided. | column | OctetString | .1.3.6.1.4.1.629.236.20.1.1.15 |
| nbsSigLaneLaneFaultsOper This object provides operational lane fault conditions:
The first octet provides Tx information:
Bit 0: Tx LOS if set
Bit 1: T… | column | OctetString | .1.3.6.1.4.1.629.236.20.1.1.16 |
| nbsSigLaneLaneIndex Ordinal index for the signaling lane in a port:
1..4 for QSFP[+] 4 x 10G
1..4 for CFP 4 x 25G
1..4 for CFP 4 x 28G
1..10 for CFP 10 x 10G | column | Integer32 | .1.3.6.1.4.1.629.236.20.1.1.2 |
| nbsSigLaneLaneTxPowerLevel This object indicates the status of this lane's
measured received power, reported in nbsSigLaneLaneTxPower:
notSupported(1), if (nbsSigLaneLaneTxPower = 0x80000000)… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.20 |
| nbsSigLaneLaneTxPower The output power (in milli dBm) of this lane.
Not supported value: 0x80000000 | column | NBS-MIBNbsTcMilliDb | .1.3.6.1.4.1.629.236.20.1.1.21 |
| nbsSigLaneLaneTxPowerAdmin The desired output power (in milli dBm) for this lane; the value
should be within the supported bounds of the given pluggable.
For a CFP/CFP2 supporting configurable Tx power, thi… | column | NBS-MIBNbsTcMilliDb | .1.3.6.1.4.1.629.236.20.1.1.22 |
| nbsSigLaneLaneRxPower The received optical power (in milli dBm) of this lane.
Not supported value: 0x80000000 | column | NBS-MIBNbsTcMilliDb | .1.3.6.1.4.1.629.236.20.1.1.31 |
| nbsSigLaneLaneBiasAmpsLevel This object indicates the status of laser bias current,
as reported in nbsSigLaneLaneBiasAmps:
notSupported(1), if (nbsSigLaneLaneBiasAmps = -1);
low… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.40 |
| nbsSigLaneLaneBiasAmps The bias current (in microAmps) of this lane.
Not supported value: -1 | column | NBS-MIBNbsTcMicroAmp | .1.3.6.1.4.1.629.236.20.1.1.41 |
| nbsSigLaneLaneLaserTempLevel This object indicates the status of laser temperature,
as reported in nbsSigLaneLaneLaserTemp:
notSupported(1), if (nbsSigLaneLaneLaserTemp = 0x80000000);
… | column | Enumeration | .1.3.6.1.4.1.629.236.20.1.1.50 |
| nbsSigLaneLaneLaserTemp The temperature (in degrees Celsius) of this lane.
Not supported value: 0x80000000 | column | NBS-MIBNbsTcTemperature | .1.3.6.1.4.1.629.236.20.1.1.51 |
| nbsSigLaneLaneEthTxAllOctets The count of bytes in all Ethernet frames transmitted.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.60 |
| nbsSigLaneLaneEthTxAllFrames The count of all Ethernet frames transmitted.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.61 |
| nbsSigLaneLaneEthRxAllOctets The count of bytes in all Ethernet frames received.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.70 |
| nbsSigLaneLaneEthRxAllFrames The count of all Ethernet frames received.
Not supported value: 0xFFFFFFFFFFFFFFFF | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.629.236.20.1.1.71 |